error 0xc18a0106 3210xi printer

Similar Questions

• How do you properly remove and reinstall the hp 3210xi printer software in Vista after a bad installation?

  It is a repost to seek expert assistance from HP last week.

  Product: hp 3210xi printer.

  Operating system: Vista 64-bit.

  Errors: Several, especially related to the missing .msi TrayApp, status and DocProc files.  Some of them are on other Windows logon are call center solutions HP or by selecting the scan function.

  Changes: Do not change when the errors using the started HP Solution Center, probably after an update or install, but could not have used quite close to associate the change.  Print function has always worked without error and the analysis function is used less frequently.  Have tried repeatedly during the uninstalling and reinstalling.  Have used the System Mechanic to try to erase the registry HP errors reported.  Have seen some HP Solution Center errors before but have always been able to reinstall to remove.

  Problem: Cannot connect to Windows without error.  Cannot start HP Solution Center without errors.  The HP solutions Center opens and functions, but the text is missing.  Can't scan from the center of solutions without errors, but tests eventually work.

  Hi JohnZNC,

  There are a set of "scrubbers" that appear in your installation directory, which can carry out varying amounts of clean-ups/uninstall.

  The deepest is a "uninstall L4' and and is launched by exectuing the 'Uninstall_L4_64.bat' file (double click should suffice).

  These files are in the subdirectory '\util\ccc', is usually found in c:\program Imaging\ of Hewlett-Packard...

  Find the "Uninstall_L4_64.bat" file, then double-click on it to get the course of cleaning.

  Hope this helps

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• an unknown error occurred while printing.

  Hello

  I hope someone can help, I just bought & installed a dekjet HP 2510 printer all in one, when I try to print something online, for example invoices PayPal, address etc. labels I get a small box that says: "an unknown error occurred during printing." happens on everything online that I have tried, I don't have a problem printing anything else , & no problem found with troubleshooting. any ideas? If it cannot be resolved his pick-me-up & I won't go back to Epsom.

  a big thank you to anyone who can solve this unwanted problem/glitch.

  Hello

  Try following the steps in the steps to reset firefox and then try to print.

  1. Type of topic: config in the address bar and press ENTER. A list of preferences.
  2. Find the print.print_printer preference (Note: this preference is missing in Firefox profiles where you have never used the printer.)
  3. Right-click (context-click) this preference and select reset. (Some users may have to reset all the preferences of print.printer for a particular printer, if this master preference reset does not solve the problem.)
  4. Restart Firefox and see if the problem is resolved.

• Photosmart P6350 will not print, but the computer analysis. Have 'Error' on the print monitor

  The two HP1300 Photosmart inkjet machines and displays the same error message and print, however the Photosmart P6350 scans and copies. Scan indicates the all-in-one is online, but I send a print command and the print monitor responds with 'Error' and no other information. I'm puzzled. I tried all the remedies support hp; same result. iMac OS 10.6.8 recognizes two printers but simply shows them "idle".

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Program error Windows Vista - printing access denied 0x00000005

  original title: program error Windows Vista

  I recently installed a Brother QL-500 label printer on my Windows Vista operating system and I am getting a printer - error message (0x00000005) print access is denied.  Brother customer service tells me that it is a mistake to program Vista.  Can anyone recommend a fix for this?

  You have installed the drivers for windows 7, yet?

  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  What are the permissions?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Create a new user account and try to print

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Error code "Windows printer Interface does not.

  Original title: print queue stüch document display in the suppression of landmark when he is not removing or printing when it is not printing printer interface window error msg does not have already reinstalled driver 4 times turns on is quite what is wrong

  error code "Windows printer Interface does not ' happens too times I have re installed printer drive 5 times also status on a print document shows in printing when printing does not then when I try to cancel the document it shows deleting but its not sound help please frozen. Thanks richard

  In order to answer your question, you need to tell more about your hardware system configuration.

  No assumption here:

  (1) the printer must be compatible with your operating system. Follow the program and manual installation. Normally, these measures ensure impeccable installation.

  (2) re - install the printer before removing all previous printers will cause you problems.  Delete all incidents related to this printer software.

  (3) most of the software are installed everything first, without the connected printer. You will need to follow the guests. Remove the CD. The system receives a reboot, the power and the USB cable are attached, you turn it on and the computer detects the device. So actually, it installs the appropriate driver package. This is typical.

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• printer pro 8600 - 2 trays stops printing all nite at 19:00 error not connected printer States

  My pro HP8600 printer has malfunctioned since new right out of the box. HP has been unable to provide the solution. Every evening at 19:00 the printer stop printing and won't return until I restart my PC/laptop. I have a HP 4100 on USB printer that works very well. The 8600 will be fax and copy, but won't scan or print emails or documents. Error state the printer will automatically disengage when it is not. I restarted the printer, but it does not help. All the tests I did on the network IP address of departure etc. PC is running XP

  Okay, I think it's a XP bug that exposes HP software. See the following link for more information:

  http://support.HP.com/us-en/document/c03149924

  Also, even though it is not stated in the article, putting to Vista or 7 would also "resolve" the issue.

• C4780 - error in the printing system

  C4780 worked without incident for months until recently - now I find randomly in status 'offline '.  Today has been visited by "error in the printing system.  Any ideas?  I already deleted the printer and the software which then does a re - install using the downloaded software from the HP site (can't locate the original install CD).

  OK, I'll assume that this printer is connected wireless to your router.  I would like to know if it's USB to your PC.

  First of all, don't use WEP.  It is not safe and can cause connection problems.  Use WPA with a password of 13 + character that you create yourself!  Much easier and safer.

  From the front of the printer: [Scan] Setup > network > wireless network Test.  It will be radio of the printer self-test.

  When the printer is offline, run this utility.  It will tell you what is happening.

• When you print it out paper HP PSC 1507 just repeat the error in the print job

  Hi im on MAx OS X 10.6.4 and I got it all in one HP PSC 1507 printer... I don't know why but I have intralled all the drivers n etc. but it keeps just coming with error in the print job just stay

  Any help would be appreciated

  Thanks George

  Good question.  Although it is listed as being supported under Snow Leopard, there is not another print and scan all drivers.

  We will restore the print system and just use the built-in support for your printer:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• N Officejet Pro 8600: error message says printer malfunctions... really?

  OfficeJet all-in-one 8600 printed a sheet and then not print again.  Error message on the screen indicates "there is a problem with the printer or ink system.  Turn the printer off, then on.  If a problem persists, contact HP. "I tried to do and was met with a brusque respoonse telling me that my warranty was expired.  It is tied to a way to re - define the printer, but I can't understand what it is, nor can I identify any type of problem with the provided 'tools'.  All cartridges have been checked to ensure that they always have an acceptable level of ink.

  The steps outlined in the document here may help resolve the error on your printer Officejet Pro 8600.  If you arrive at eight solution without success it can help to remove the print head as shown in the first step of the document here and clean the electrical contacts on the back.  Use a clean wet coffee filter or some other no fluffy to clean the electrical contacts on the print head as well as on the surfaces of contact on the printer.

• OfficeJet J4580 error on black print cartridge

  I have an OfficeJet J4580 AIO Printer. The error that says "Print Cartridge problem: [Tri-Color] refer to device documentation to troubleshoot."

  It wont let me not align cartridges or run any type of installation. Is he just saying that he needs a color cartridge? Why not say that?

  Thanks for any help you can provide. Dianne

  Hi, check if the problem with the Tricolor cartridge can be solved by cleaning the contacts. More details in this document of the

  I hope this helps...

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com