printer pro 8600 - 2 trays stops printing all nite at 19:00 error not connected printer States

Similar Questions

• HP Officejet Pro 8600 Plus tray 2... to be configured.

  Is it possible to select the Tray 1 or 2 as a default value with HP Officejet Pro 8600 Plus? Thanks to all of you who have experienced the ability of tray 2... to be configured.

  Fred

  Here is a document with information about printing from tray 2:

  http://support.HP.com/us-en/document/c03073416

• HP Officejet Pro 8600 won't stop printing.

  My HP Officejet Pro 8600 bought aproximatelly 4 months after doing some copies of web pages today all a süden after extinction of the last impression continues on its own to spew more than 25 pages of text without a showdown on his own pages.  The printer worked perfectly so far.

  My lap top is a Windows 7 operating system and 64-bit.

  I was not able to stop it until I disabled the printerl.  Can you help me please.  Thank you very much.

  Hi Jabzi, thank you very much for your answer.

  Your answer was correct is an ACCEPTABLE SOLUTION.

  Also I forgot to give a KUDOS then please mark it for me since I was not able to return to the page before this one.

• 8600 Officejet Pro 8600 no more stopped printing

  I have an Officejet Pro 8600 Plus 8600 that I installed on my home wireless router.  I use a Dell laptop with the Windows 7 operating system.  I have installed the printer without a problem when I bought it a month ago.  A few days ago, I tried to print a page before going to my work and could not operate.  I don't think much since I'm in a hurry, but later when I returned from work, that my printer was still not working.  I unplugged the printer and close the router and the laptop.  I rebooted everything and always the printer would not work.  No test page or anything.  I uninstalled the drivers and reinstalled and the Test of Fax report prints fine, but when I tried to run the printer test page, I got the error message "Unable to communicate with the printer."  I have worked on this for two days now and nothing I will work.  I used the doctor Print and evrything goes, but still no luck.  Help please?

  WEEL I finally thought to it.  My McAfee did an update that wiped out my ability to print.  I changed the settings for McAfee and I was able to print again.  Thanks for your help!

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 8600 Plus: PC stopped communicating with wireless Officejet Pro 8600 more

  My HP printer has been connected to my PC via my home wireless network and work without problem, for 18 months.  A few weeks ago the printer stop appearing in the printer dialog box when I went to print a document.  The printer continues to operate wireless for all my mobile devices without problem.

  I went through all the HP process and tools for troubleshooting, downloaded and installed all updates, nothing helps.  I uninstalled my PC off and now it will not reinstall.  The installation process see the printer on the network, but when I try to install it it said "cannot be installed on the network" and it goes no further. I lost hours and hours trying to get to the bottom of it, nothing helps.

  What is the problem?

  Hi @Layli,

  Welcome to the HP Forums!

  I noticed that your PC has stopped communicating with your HP Officejet Pro 8600 wireless connection more. I'm sorry to hear that, but happy to help!

  Out of curiosity, what happens if you install the printer using the USB method wireless configuration? Check out this guide, your wireless printerand select Configuration USB wireless.

  Also, if this does not work, able to install the printer are you using a USB connection? In this way, we can see if the problem could be the connection itself or not.

  You see error messages on the control panel of the printer at all?

  Thanks for posting and hope to hear from you soon!

• OfficeJet pro 8600 paper tray slides not well

  OfficeJet Pro 8600, Vista.   Newly purchased.

  It is about the paper tray (and there's only a single tray for the Pro model).

  It is not related to change the paper size, or how to close the tray when in legal size I've seen in a post.

  This tray is attached directly on the surface of the table. When you open and push to close, he rubs too on this surface and is very difficult to open or close.  It will just slip off as my other hp printers.  The friction is causing this frustration.   I have to actually lift the printer with my other hand to remove the bin to.

  Anyone else having this?  How to remedy?

  What a shame of a problem.  Looks like a nice printer.

  Problem solved.  The table of this printer on a material cover.  I placed the printer elsewhere with hard and soft surface.  This seems to work better.  However, not the best slides inside and out, but a lot better.

  conclusion: do not throw a printer on any material!

  Sorry for the inconvenience.

  Solved.

• Officejet 5610 all-in-one: Solution Center says not connected printer

  I can not info ink level when looking for the ink level using Toolbox printer in the solution Center.  It says 5610 printer not connected... but the functions of printer normally.

  Perfect!

  Thank you at this point, you can continue to check levels of ink on the test page, or you can remove the software and driver from your computer and try to reinstall to see the Toolbox will work again.

  If you want to go ahead with uninstall and reinstall, uninstall the printer software from the Control Panel on your PC, restart your PC then to complete uninstallation and download and run the installation from here: HP Deskjet and Officejet full feature software and drivers

  Once installation is complete, open the Solution Center on your desktop and try to check the levels of ink again.

  Good luck

• All-in-one HP Photosmart C6280 not connected to the internet, and can not scan to computer

  My HP Photosmart C6280 all-in-one not connected to the internet, and can not scan to the computer.  I got it for a few years and must plugged into my Macbook to print, but now I want to use it to scan photos directly to my computer.  Can someone help me to do this?  Much appreciated!  (Not sure where are my original softward records!)

  Oh, OK, well this isn't probably the problem, but for good measure, you should get the latest version of the software for your printer from the "support & drivers" link at the top of this page.

  In the meantime, we will reset the printing system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Top of the window, Select the default tab . Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• OfficeJet pro 8600 more tray insert noise

  Reintegration of the paper made a terrible tray noise of cracking, as if we need to plant through a barrier.

  Hi columbia530,

  Can you take a flashlight and look in the printer to make sure that there is not an obstacle in the printer?  I reinstalled a paper on an 8600 tray here in the office and it has been pretty smooth.  You see anything out of order?

  You can also watch the status bar carefully to make sure that there is not a piece.

  Is - this tray 1 or 2?

• OfficeJet Pro 8600: How to stop a current scanning application

  While trying to scan a new document, I get an error message saying that the scanner is in use.  How to stop an open scanning application.

  Hello
  
  Thank you for using the HP Forums. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not help, we recommend uninstalling and reinstalling the software FULL of features.

  Hope that helps.

• OfficeJet pro 8600: how to stop hp network communicator has not stopped working message

  How can I remove the hp Communicator. I keep getting a message box pop up saying that he stopped when I'm in the middle of a game and it appears on the screen and makes killed lol. If the printer will always print the communiator wireless I want thing.if dang the flame is just to get the updates from hp I can check for these myself.please help me get rid of this before that I crushed my printer with my truck and get another brand. Ty

  There is no HP Printer Wizard.  I went to the hp folder and open what was there and it was not the HP printer Assistant. There is no way to disable scan of the computer. I recall this option during installation.

  what I did uninstall everything and not the box scan of the computer this time.

  the information that you gave me was useful. the way to do this was wrong.

• OfficeJet Pro 8600 Plus: paper stop on the stall broke

  Someone broke the paper stop so printed pages land on the floor.  The Staples store only replaces printers, and this one is no longer under warranty.  It's always a good printer.  Is it possible that I can order the part and replace it myself?  The part I need is that you shoot for letter or legal with the paper stop to the end of it.

  Thanks for that link, it at least allowed me to get CB015-67011 part number and then search the Internet. I found an American company Partshere that it even ships its products to the Canada.  :-)

• OfficeJet pro 8600 output tray

  How do remove you the output tray for legal size paper.

  Hi columbia530,

  You should be able to extend the output tray on the legal situation. If it seems to be stuck, you may need to push in, then spring one or two times to the release. Be sure and be careful when you pull the tray does not break the flap at the end of the output tray.