"Error 1068 - the device of dependence or the group could start" _
"Error 1068 - the device of dependence or the group could start" Windows could not start the service Acquisition of Image Windows (WIA) on the local computer.
Problem: Cannot parse documents!
In the type of search: services
Click on the services that is present at the top of the list of programs.
Scroll down to purchase picture Windows (WIA).
Double-click it, and then click the Dependencies tab
Make sure that all services Windows Image Acquisition depends, are running
Switch to the "Recovery" tab and replace all drop-down lists 3 "Restart the Service".
Make sure the 2 boxes of Reset below say '1' to them.
Click Ok.
S.Sengupta Media Center MVP
Tags: Windows
Similar Questions
-
Original title: Windows could not start the service of connection manager on the local computer remote access
amplifier
Windows could not start the service of connection manager on the local computer remote access
Error 1068: The dependency Service or group could start.
Hi sunelchandraoli,
1. when exactly you receive this error?
2. you remember to make changes to the computer before this problem?
Step 1:
"Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...
a. Click Start, type services.msc in the box start the search.
b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue
c. right click on the Remote Access Connection Manager service and then click Properties.
d. under the general tab, click Manual next to startup type.
e. under the general tab, click Start under the service status and then click OK.
f. also check for long-term services.
The dependency of 'Remote access connection manager' services include:
i. secure Socket Tunneling Protocol Service
II. telephone
III. Plug-and-Play
IV. Remote Procedure Call (RPC)
c. of DCOM Server process Launcher
VI RPC end point mapper.
Make sure that the above services are started in the services list. If this is not the case, start all services above and check.
Step 2:
You can also try a system restore to a prior restore point you have been affected by the issue.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System restore
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
Hope this information is useful.
-
I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler. Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.
Hi Jkoryzna,
Thank you for choosing the Microsoft Answers forum.
To solve the problem, fix the dependency for the spooler service information.
Click Start, run and type the following text:
CMD /K SC CONFIG SPOOLER DEPEND = RPCSS
Alternatively, to achieve this by using the Registry Editor:
Click Start, run and type Regedit.exe
Navigate to the following branch
HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler
In the right pane, double-click the DependOnService value
Delete existing data and then type RPCSS
Close Regedit.exe.
REGISTRY WARNINGChange the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Navigate through the steps mentioned in the article below.
Solve printing problems by resetting the print spooler.http://support.Microsoft.com/kb/2000007
Let us know if this helps
Concerning
Anthony. -
Problem started when the McAfee Firewall shuts off and I could not turn it back on. Also I can't activate Windows error 0x8007042c firewall. Also no Internet access due to firewall restrictions. Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start. Strangely, the McAfee Firewall seems to be OK again?
McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.
http://www.selectrealsecurity.com/malware-removal-Guide/
I hope this helps.
-
Windows Vista firewall problems. Error 1068: The dependency service or group
When I try to Active my windows firewall I get
the following message appears:"Windows Firewall settings cannot be displayed because the associated.
service is not running. You want to start the windows firewall service? »The yes/no option.
If I clicked 'Yes', another message appears saying:
"Windows cannot run the Windows Firewall service.
Okay, so I'm trying to start this service. I looked at the service
status and stopped her, so I guess it must be started, if I click on
beginning. However, the message:«Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
Could not start.What else can I do to access the windows firewall?
Hi elcri
My apologies to zero you answer you earlier since May 3.
I have to assume that the problem is still there?
Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)
Click Start
In the box, type start search in services of
List programs, right-click on service , and then click run as administrator
Scroll down the list of Services until you come to (ICS) ICS
ResetI would like to know if this solves the problem or not - thanks Ken
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get
Error 1068: the dependency service or group could not startThings I've done:- ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
- MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
I've done two things on the command line for (you) help to solve this problem:Queryex mpssvc C:\Users\Dan>SCService_Name: mpssvcTYPE: 20 WIN32_SHARE_PROCESSSTATE: 1 STOPPEDWIN32_EXIT_CODE: 1068 (0X42C)SERVICE_EXIT_CODE: 0 (0X0)CHECKPOINT: 0X0WAIT_HINT: 0X0PID : 0FLAGS:C:\Users\Dan>sc qc mpssvc[SC] QueryServiceConfig SUCCESSService_Name: mpssvcTYPE: 20 WIN32_SHARE_PROCESSSTARTUP TYPE: 2 AUTO_STARTERROR_CONTROL: 1 NORMALBINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNenetworkLOAD_ORDER_GROUP: NetworkProviderTAG : 0Display_name: Windows FirewallDEPENDENCIES: mpsdrv: bfeSERVICE_START_NAME: NT Authority\LocalServiceHelp me, please?Hello
I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.
-
I can't add a printer. I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not. Help?
Thank you!
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your printer issue in Vista Hardware and drivers Forum above.
See you soon
Mick Murphy - Microsoft partner
-
I use Windows 7 Home PremiumMy windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:"Windows failed to start the service on the Local Computer Security Center."Error 1068: the dependency service or group could not start"Help, please.Thank you.
Hi Rohit Chettri ,
(I am not good in English)I am trying no operation troubleshooting you mentioned. I have it set for myself.I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internetI went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.In any case thanks a lot Rohit Chettri. -
original title: cannot start service autoconfiguration WLAN and EAP services
I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."
I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.
I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.
When I tried to start the WLAN auto configuration service, I get the following error...
Windows could not start the service WLAN autoconfiguration on Local computer.
Error 1068: The dependency service or group could start.When I tried to start the service of Extensible Authentication Protocol, I get this error...
Windows could not start the service on Local computer Extensible Authentication Protocol.
Error 1053: The service did not demand launch or timely control.I searched the internet for the solution madly before posting here. Any help is greatly appreciated!
Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921
This link has the solution that worked for me.
-
Original title: Windows I/O device error?
Hi all
I'm Chinmaya and I use Windows 7 Ultimate.
I have this error message.
"Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is
Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)
Hello Chinmaya Sharma,
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error
Perform the disk check and check.
Check a drive for errors (Windows 7)
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.
Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
Windows spooler printer 8 error 1068: the dependency service or group could start.
Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.
I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
But I get an error:"Windows failed to start the Service on local computer print spooler.
Error 1068: The dependency service or group could start."Okay, so I go into properties and see what are the dependencies.
Attached image:
RPC is running, however, no FAX.
Go to Fax and just getting started. I get the error 1068
Focus on dependencies here.
Attached image:
IM lost at the moment.
Any help would be greatly appreciated.I ran sfc/scannow and found no problem.
Please notify.I found this somewhere else and this fixed my problem
I had the same problem and I have created a batch file that I have run as Administrator:CMD /K SC CONFIG SPOOLER DEPEND = RPCSS
-
Error 1068: The dependency service or group could start.
When you try to start a few automatic services (who of course has not started automatically) I get this error. Check the list of dependencies for each service they all list the HTTP Service. I have run this command: beginning of config sc = HTTP request and get a message that it succeeded, and restart the computer. No change. I run and do not restart the computer - no change. I ran sfc/scannow just in case he might find something but nothing. I even reinstalled the upgrade of Windows 8 thinking it could replace all of the corrupt files. No change. I wonder if it can also be the source of some other problems I'm having. With a certain Windows update for example.
Any help would be greatly appreciated.
After you determine that the 'http' service was one of the dependencies for the print spooler start, and after finding that there is no such service listed, I came across this answer, which will allow you to CHANGE the dependencies. Basically, I deleted 'http service'. Click on the link below and scroll down to "method 3".
http://www.techsupportall.com/solved-print-spooler-error-1068-the-dependency-service-or-group-failed-to-start/
Obviously this response of mine is almost three years after the original question posted, but maybe it will help someone else in the future.
-
Printer Spooler error 1068: the dependency service or group could not start
Original title: the printer spooler error
With the help of Windows 8
Cannot connect printer to computer.
Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
Windows could not start the Service on the local computer printer spooler.
Error 1068: The dependency service or group could not start
Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.Thank you
With the help of Windows 8
Cannot connect printer to computer.
Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
Windows could not start the Service on the local computer printer spooler.
Error 1068: The dependency service or group could not startCould someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.
Thank you
need to update Printer Spooler service...
Run the following as run as administrator...
https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat
Reset...
-
Want 4500: Connection error! The printer could not connect to the server
Connection error! The printer could not connect to the server!
Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!
I am successfully connected to my router and can print from my pc and my ipad with airprint.
PC "will not find"the printer either for purposes of updating
What I need to change the DNS. If so, I don't know what it is or how to do it!
I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.
Can anyone help?
Very frustrated customer :-(
Hi @roopuk,
Thanks for getting back to me.
Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users. Try the same steps as described above, but this time use the following parameters:
Manual preferred DNS Server: 209.244.0.3
Auxiliary manual DNS server: 209.244.0.4If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.
What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services. In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server. HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.
Here is the information that you need for your provider service to open ports on your router/modem...
-Multicast must be enabled
-Hello enabled for AirPrint (relevant for iOS and Mac OS users)
-Mac filtering should be disabled
-Also, make sure that your router's firmware to date if
necessary
- The dmz on the router mode and turn it on to the printers IP address: _Ports to open are: Eprint and Apps
Incoming Ports.
UDP
80
443
------------------
Outbound portsTCP
5222
5223
-------------------
Once they are open, you should have no problems connecting to services web eprint on your device.I would like to know how it works for you.
Kind regards
-
Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond. I'm not as technical as most of you, but I am unable to even get the software to install. I get an application error installation "the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP. Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...
Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26
Maybe you are looking for
-
iTunes displays wrong work when album field is empty
I use iTunes on Windows 120 12.4.1.6, but I had this problem for a while... I have a lot of tracks where the album field is empty (for example, singles, mixes, radio shows) that have added work and work correctly shows when I go to the tab work on 'g
-
The old status bar showed a lock icon when a site secure - where is this lock icon in verse 4?
The status bar was along the bottom of the window. At the right end of the bar, a lock icon appears when you are on a secure site, as bank earnings or invoice. With the now missing status bar, where can I see this lock icon?
-
Sony KDF-55E2000 turn off and on itself
I have a Sony KDF-55E2000 who goes out, then back, without any input from me. The power light on the front of the TV flashes green while he's back back, like it normally does when the TV is turned on. No other lights are flashing. Is the power light
-
window menu and the welcome eMachines window continues to display
I keep getting a window on the lower right of my monitor that says thank you for exploring the emachines E19T6W LVD wide screen display. He invites me to take a turn produces what I did. There are buttons on the side of the monitor to "next" and "en
-
Too many screens on one screen! Help!
the screen is basically tiled and there are 6 tiny screens on a single screen. The computer also keeps turning off randomly and it won't stat up correctly unless it is in safe mode. I need solutions other than a virus check, I have tried already.