0xc18a0106 on Photosmart c5180 error code

Similar Questions

• On HP Photosmart C7280 error codes

  I get B03FCC84, B82C9540, B0430194 error codes on my Hp Photosmart C7280 printer. This happens when I try to turn it on when I can get it to turn on. Help, please. Thank you.

  HI Doces174,

  Unfortunately, your printer has a hardware failure codes. I would remove the cartridges from the printer and remove the power for about 30 minutes. Connect the power without putting in that return cartridges and see if the unit starts. Reinstall the cartridges when the printer asks you for them. If this still does not resolve the error messages, you will most likely need to replace the printer. You can call our technical support and check in the trade trade program at 800-474-6836.

  http://support.HP.com/us-en/document/c00489814

• Photosmart 6520e: error code 8004200b on Windows 10 update failure

  I use a laptop Pavilion DV7 64 bit which my Photosmart 6520e is working. I was on Windows 7 but that you have upgraded to Windows 10 in the last 2 months.

  Updates Windows told me that attempts to install an update to printer ALALA keep failure. The message I get is "HP - Imaging - printing - HP Photosmart 6520 Series - Null error 08024200 × b" cannot install the update.

  So far, I have a solution to this Microsoft after trying various suggestions such as Windows update troubleshooting startup and clean.

  Someone at - it additional ideas, or is it because there is no suitable for my 5 year old laptop Windows 10 graphic driver?

  Gordon

  By disabling automatic updates, you can test the HP the rewritten Microsoft drivers b4.

• Photosmart C5180 Installation ERROR - Windows 7 64-bit - system cannot find the file hpzprI40.exe

  Photosmart C5180 all-in-One

  During the installation:

  C:\Users\Test\AppData\Local\Temp\7zS1DB2\Setup\...\hpzdrI40.exe - m...

  The system cannot find the specified file.

  I clicked OK, then came next to the top:

  Error Situation code: 06768865

  The following lines were extracted from installation error logs.

  + Launching 0000000000001246128\s\Now = X:\hpzprI40.exe m

  preloadiceenginetoguidfolder-* "X:\autorun.inf" - nosplash - checkPath

  XXX-1-f "X:\hpoins18.dat" "-number validate dat"-No. validate "

  Found source file: X:\hpzsetup.exe

  VerifyFilesNoDecompression() failed with the system cannot find the specified file.

  Exit code = 2

  H E L P!  I don't know what to do now.  I tried to install the downloaded file, AIO_CDS_Net_full_Win_WW_130_140 on HP site.  My operating system is Windows 7 Ultimate 64-bit.   I need to get this working today and need complete instructions on what and how to do this fix.

  mrsjeffyg, I recommend that you completely uninstall the printer from the computer. Make sure that all copies of the printer and the associated files are removed from programs and features, the Manager of devices, and the devices and printers. If you are connected with a USB cable, make sure that the cable is removed from the printer for the duration of the present.

  Click START and type "%temp%" and press ENTER. This will open the temporary folder, and I want that you delete all the files that you can here. Some will not be able to be deleted, so ignore these files.

  Restart your computer.

  Follow this link here and reinstall it from the Full_Feature Driver and software.

  http://goo.GL/0zXiT

  I would like to know how it goes!

• New Photosmart C8180 displays error code C2FF8575 out of the box.

  I bought a Photosmart C8180 a few years back but put away in a closet and never opened until today. I started to install the printer and followed the instructions, but when I plugged on feeding (a first step in the installation program), the screen started showing the error Code C2FF8575, more a point of exlemation on the front of the machine and the power button began to blink rapidly. I have insterted the cartridges in it, but it did not help. I followed a tip of troubleshooting I found on the HP site to uninstall your ink cartridges, unplug the printer for at least 60 seconds, then plug back in. There is nothing to help as well. Please help me to solve this problem and get this printer doesn't work! Thank you!

  Hi mekshp and welcome to the Forums of HP.
  
  I see that you are having errors priner. After reviewing the error code, it seems that it is a fatal error in the firmware of the printer.  I recommend you contact HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• PhotoSmart Premium C310a: Error code 06x1011bef

  I have a HP PhotoSmart Premium C310A get error code 06x10011bef, no idea what it is?  It was error 0x610000f6 I found to be 'Transport Jam'.  Found a sunken world of black ink cartridge cartridge everywhere inside the printer.  took the print head and cleaned and do not have this error more, but now the news.  Any help would be appreciated.

  Hello @Hummer49,

  Welcome to the HP support forums.

  I understand that you have found an error code after the cleaning of the print head of your Photosmart Premium C310A.

  Usually, the error refers to a print head or of ink system failure.

  He could have maybe been damaged during cleaning.

  Try to go though the following document.

  "HP printers - solve the 'problem with printhead,'"Printer failure,"'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Error

• pump motor stalled error on Photosmart C5180 and C6280

  When I turn on my printer, one is a Photosmart C5180, the second is a Photosmart C6280, I get an error message saying "pump motor stalled." If I switch off and on again, it clears sometimes. No matter who else experienced this on both printers. Both use only Original HP ink cartridges.

  Hi Andrew

  According to the users in this thread:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-Photosmart-C7280-pump-motor-STALLED/TD-p/500777

  There is a solution on the first page of joulem, several customers have received the help of

  I hope this helps!

• Photosmart C5180 using Windows 8. Error message = Z:\is is not accessible - the handle is invalid

  I just bought a new computer with Windows 8.  I loaded the software for my Photosmart C5180 all-in-one printer.  It seems to print fine but when Itry to read a memory card I get an error message: -.

  Z:\is is not accessible - the handle is invalid

  Hello numuc95.

  I guess that the printer is installed network? Have you tried to install the printer with a USB cable? This seems to work best for access to the card reader.

  If you can not install with USB, look at this link to see if it helps:

  http://support.HP.com/us-en/document/c00149194

  I hope this helps.

• Photosmart D110: Photosmart D110 Driver Install results in error Code 1327

  I have a fresh install of Windows 7 on a new disc of starting with the letter 'L '.

  When I try to install the Photosmart D110 driver software, the installer returns error Code 1327 and the drive not valid "C:\". ».

  The files on this site for troubleshooting 1327 error Code seems to indicate that the problem is the drive letter of the DVD drive has changed.  This is not the case, and I get the same error when you run a downloaded version of the driver (instead of the CD supplied with the printer).

  It seems to me that the installer drive letter C hard somewhere.  Correctly, it says that it will install on my 'L' disc during the pre-installation steps.

  Is it possible to get the D110 driver to install on one disk other than "C"?

  Hi bglocker,

  The installation of default HP driver C, which is an expected behavior.

  To work around this problem, follow these steps:

  1. On the road L dark a new folder and name it as HP.
  2. in the type of menu start CMD in the search, according to the results bar right-click the listed CMD / command command prompt and select run as administrator... confirm any command prompt.
  3. In the command line box, type the following command:
     Note: you can paste in the CMD by clicking with the right button on the screen and select Paste, CTRL + V does not work...

     subst c: l:\HP

  Now run the installation once more, action above created temporarily a virtual drive C on your PC once installation is complete that restart your PC and the temporary folder will no longer appear.

  Shlomi

• Photosmart c5180, scan error after upgrade to windows7

  (1) photosmart c5180

  (2) windows7 (32 bit) operating system

  (3) error message 8, [(8,0,0)] after clicking on the scan button in the HP Solution Center

  I upgraded my PC from vista to windows 7. I also installed the latest driver for windows 7 on the HP site. My printer is connected via a wired LAN. printing is OK but analysis gives an error

  Hi RLel,

  Thank you for the update. You should consider a full system recovery on your computer at any given time. If I think of additional troubleshooting procedures, I will inform you. Have a wonderful day.

• Photosmart Premium Fax series: error code 11471108

  Received error code 11471108 when you try to print from my desktop Gateway computer?   JP

  Hi @toano

  I can't say what is originally this 11471108 troubleshooting error code, but I'd love to help you understand and work towards a resolution.

  Performing printing and Scan doctor could help. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• the Photosmart b110 series printer: Ox19a0020 error code

  My printer has error code ox19a0020 I looked for alternatives to the HP site and I cleaned the printhead manually according to instructions and pulled the plug and replace etc etc and yet it still has the same error message. Help

  Hi @nannie07

  Thanks for getting back to me.

  I agree, you probably need a new printhead.

  Printhead replacement games are available from HP customer or authorized service providers assistance.

  Contact HP for service in all countries except Asia-Pacific.

  If you have completed all the above steps and your product still has a problem, the printer service
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

• Oxc19a0013 error code

  I have a HP Photosmart B210e more all-in-one printer-product # CN 219.  First, I got the blank pages, then I printed a diagnostic report and it showed all colors except black.  Then received the above error code.  I have reset the printer out the cartridges and the print head.  Clean the printhead, cartridges, and the error message continues.  At one point also got an error message on the problems of print head, took out cartridges again, new and very carefully replaced print head cartridges and print head, bought a new black cartridge and still get the above error message.  The message on the print head went.  Now any suggestions?  I have Windows 7.  I hate to replace the print head and then find this does not solve the problem.  It was cheaper to buy a new printer.  Hopefully I can solve the problem, I do not like the product.  All thiis started a few weeks after I had installed a black cartridge 564XL.  Who could part of the problem?

  Hey b_4,.

  I see that you have a code 0xc19a0013 (generally ink system failure) on your HP Photosmart Plus B210.  This is normally an indication of a hardware failure in the system of printer ink, heads of printing or the internal part of the system of ink in the printer.

  I see you did a lot of troubleshooting for this problem.  There is a document that deals with this type of error, however, of troubleshooting to the B210.  I would advise to check through and making sure that all measurements are made.  The document can be found by clicking here.

  If all measurements were made, then they should consider the options at hand.  This printer is guaranteed?

  You can check the status of the guarantee of their printer by clicking here.

  If you are out of warranty, then you have more options at this stage.

  • You can buy a printhead for the HP parts store by using CN642a for the Photosmart B210 part number.  This printhead currently sells for about $ $70.
  
  
  • You can call the HP Technical Support on the upgrade program.  The upgrade program is where you can get a newer refurbished model HP printer (similar to the current model), with a full factory warranty, at a discount from the new sale price at retail.
  
  
  • You can buy a new HP printer from a retailer (it will have the same full factory warranty).

  To contact HP Technical Support:

  • If you are a resident of the United States or to the Canada, then the number to dial is 1-800-474-6836.
  
  
  • If you are a resident of a different region, then please click here to access the global contact list for HP Technical Support.

• Problem cartridge HP Photosmart C5180

  Recently, I tried to change the cartridges for a printer HP Photosmart C5180 and bought two new sets, so I got some for the future. The representative of HP in the store told me that 02xl vivera HP inks would work as well as 363 regular cartridges supplied with the printer and that they would be more beneficial that they hold more than 50% ink. They also fit perfectly into the printer.

  When I put in the error message the front of the printer says: "the ink cartridges are not intended for use with this printer. I can't bring back them to the shop as I bought a HP store in Las Vegas and I live in England. Please, please help if you can because I do not know that they would work with change of parameter or something.

  Kind regards

  Andy

  Sorry, the 02 cartrdiges cannot be implemented in the C5180 which is regionalized for England.  There are certain circumstances where HP can change the settings of the regionalization of a printer, but this case does not match this model.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• HP 15-r030na: 3 HP Smart printing error code

  Whenever I try to use HP Smart printing service to print a web page to my printer HP Photosmart 7520, I get an error message stating the error code 3. The link in the error message window brings me to the HP Smart printing page, and from there he has a link to this forum, but there is nothing in those two places that explains what error 3 code is. Can anyone help? I use IE11.

  Hello @Malcolm5,

  Welcome to the Forums of HP's Support. I understand that you have found an error code 3, when you try to use HP Smart printing.

  I'm not sure what is meant by error code 3, but I think it has to do with a browser not supported.

  HP Smart Web Printing Software - Internet Explorer 9 and later Versions are not compatible with HP Smart Web Printing

  Now, I know that smart Web printing has been replaced by HP Smart printing.

  What I found interesting is the following: HP Smart printing is a new replacement program HP Smart Web Printing. HP Smart printing is supported in Internet Explorer, version 10 or earlier. (Taken from the link previously provided)

  In addition, Internet Explorer now that 32-bit and 64-bit versions.

  What I read in the following document, I think not that Smart Print supports 64 bit, Internet Explorer.

  Product HP printing - HP Smart Web Printing Software replaced by HP Smart printing

  In other words, it seems that Smart Print does not support IE 11