> psr TMADMIN_CAT:116: ERROR: memory allocation failed.

Similar Questions

• JNI memory allocation errors

  We took a 32-bit 10.1.2.3 B2B instance on Linux. We have dedicated as much memory as possible to the JVM and for some messages we receive memory errors in allocation of native code NYI (EDIFACT). When the native code allocate the memory?
  
  My real question is whether we should allocate less memory for the JAVA virtual machine in order to make more memory in the 32-bit address space available for the operating system for allowances of JNI or what we should do instead. There are many memory physical machine (16 G, no more than 4 G) it must have something to do with the 32-bit limitation.

  My mistake. Not sure which used Oracle of the API, but for native code memory must be allocated in the heap of BONES and not in the java heap.

  When execution of a piece of large capacity memory is requested, then the allocator of OS will try to find that OS bunch and if she couldn't then returns the bad_alloc exception (as far as I know, bad_alloc is a class in the C++ standard library). It needs a lot of debugging to know the exact cause and find a solution; and for this, Oracle's Support is certainly knocking on the right door.

  There are many memory physical machine (16 G, no more than 4 G) it must have something to do with the 32-bit limitation.

  This statement is interesting because as far as I know, Linux does not need to be defragmented and so if 4G memory is available then bad_alloc exception should not come. However I still can not comment because there are other factors as well that should be considered, as - size of the payload, of environment settings, by the memory of the affected user, by the maximum memory allocation process has allowed etc.

  Please check the above factors and try to find any occurrence of pattern/common between exceptions. I'm not a linux expert, but again, it seems that the problem is with OS and its parameters.

  Kind regards
  Anuj

• Why these two operations to reshape Array cause an error "memory is full" in LV86?

  The attached VI was recorded in LV8.5.
  It's a small piece of code which illustrates how one of my applications use to initialize two 2D-arrays of Im DBL. my request the total amount of memory allocated by this VI is about 450 MB (as in the attached VI) and 2D bays 'live' in the shift registers.
  Now, I tried to check if the application is running in LabVIEW 8.6 and it stops with an error "memory is full".
  I've isolated the problem to this small piece of code and it still does not work without error.
  Curious: The same code runs well in LabVIEW 8.2.1 8.5.1, and 7.1.1... So, where is the difference?
  Best regards, Guenter

  I agree it is strange and deserves to be more looking. There is a solution that seems to help it will not change the functionality of your code. Instead use a loop While and shift uninitialized registers, you can use the comment nodes and none while loop. The attached example exhibits the same behavior as your code, but does not give a low memory error.

  It seems that the only reason it works is not that I use the nodes of comments, but I'm wiring table 2D through from the node of feedback to the constant table, not a 2D array resizing function. If I have the wiring on the other side, it will fail the same way.

  For example, recorded in LV86.

  

• Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

  Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

  Hello

  Try the following.

  First, download the Memtest Image file (.) (ISO) on the following link.

  http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

  It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

  Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

  At least 3-4 passes and see if errors are found.

  Kind regards

  DP - K

• ERROR: Invalid Allocation, 1610612738 bytes in Links 2003 running Windows 7 ultimate 32-bit edition

  Hello

  To solve the problem that I have, program uninstalled, rebooted machine. Has conducted an audit of the registry and remove the entries from 7 registry errors in Links 2003. Rebooted the machine. Installed Links 2003, installed patch 1.05, 1.07, and Links2k3-nvidia_win7_FINAL. I also tried to launch, links 2003 Safe Mode and still, I get this error message: ERROR: Invalid allocation, 1610612738 bytes. Any help would be greatly appreciated.

  ERROR: Invalid allocation, 1610612738 bytes

  Processor registers EAX = 0 x 00000000 EBX = 0 x 00000000 ECX = 00000000 EDX = 00000000 Flags x 0 x 0 = 0 x 00000000
  = ESI = 0X00000000 EDI 0X00000000 EBP = 0X0012F4A8 ESP = 0X0012F348 EIP = = 0X00000000
  EIP (0X00000000)? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
  ESP (0X0012F348) 0012F35C 0012F634 0012F62C 01DC3DC0 60000002 00010000 000001A 9 03C20DE0
  00000100 0000002D 01DC4258 00000200 0000003D 01FDFDB0 76F5491C 00000014
  75206AC4 84027F1C 00000674 75206E93 75206E9E 0031007E 75206E9E 004C002E

  Details of the machine
  ===============
  Name of executable: C:\Links 2003\LINKSMMIII. EXE
  Executable hour, date: 19:49:12 Tuesday 3/30/2010
  Command line:
  Current directory: C:\Links 2003
  Currently, date: 19:05:49 Tuesday 6/22/2010
  GameOS build version: Version 1.1 02/11/2000
  Software rasterizer: c:\links 2003\assets\binaries\blade.dll (size 282 693 bytes)
  Username: Mike Harrison
  Computer name: HICHAMCHGORA
  Processor: 2812 MHz AMD 3DNow unknown MMX! Model SSE = 10, Type = 15, Stepping 0 = (6 processors)
  Cache information: unknown
  L2 w/r/rw speed: 4 cycles 22496 Mbps, 4 cycles 22496 Mbps, 4 cycles 22496 Mbps
  Main memory r/w/rw speed: 14 cycles 6427 MB/s, 13 cycles 6921 Mbps, 10 Mbps 8998 cycles
  W/r/rw video memory speed: 204 cycles 441 MB/s, 38 cycles 2368 Mbps, 289 cycles 311 Mbps
  W/r/rw memory AGP speed: 204 cycles 441 MB/s, 37 2432 Mbps, 288 cycles cycles 312 MB/s
  Operating system: Windows (6.1.7600)
  DirectX version: 9.04.00.0904
  Since booted time: 2 h 45 m 25 s
  In the logic of the game time: 0 h 0 m s 0.62 (on frame 3)
  App running time: 0 h 0 m s 0.62
  Physical memory: 2 147 483 647 bytes (2048 Meg)
  Physical memory available: 2 147 483 647 bytes (2048 Meg)
  The swap file size: 4294967295 bytes (0 Meg)
  Available page file: 4294967295 bytes (0 Meg)
  Virtual memory: 2,147,352,576 bytes (2048 Meg)
  Virtual memory available: 1,937,620,992 bytes (1848 Meg)
  Amount of the used battery: 3172 bytes
  Memory load: 31%
  Desktop video mode: 32bpp 1920,1080
  Mode when the accident occurred: full screen 1920 x 1080 x 32 (NVIDIA GeForce GT 220)
  Networked Machine: No.
  Executable version: 01.08.06.2200
  PCI Chipset: unknown

  Path of Threads process Pri
  ==========================================
  TaskHost.exe: 8: 8: C:\Windows\system32\taskhost.exe
  DWM.exe: 13:5: C:\Windows\system32\Dwm.exe
  BCU.exe: 8:6: C:\Program Files\DeviceVM\Browser Configuration Utility\BCU.exe
  RoxioBurnLauncher.exe: 8:8: C:\Program SharedCOM 2010\Roxio Burn\RoxioBurnLauncher.exe
  VxBlockServer.exe: 8:5: C:\Program Files\Common PX storage Engine\VxBlockServer.exe
  SetPoint.exe: 8:5: C:\Program Files\Logitech\SetPoint\SetPoint.exe
  KHALMNPR. EXE:-08:27: C:\Program Files\Fichiers Files\Logishrd\KHAL2\KHALMNPR. EXE
  RtHDVCpl.EXE: 8, 9: C:\Program Files\Realtek\Audio\HDA\RtHDVCpl.EXE
  Skype.exe: 08:20: C:\Program Files\Skype\Phone\Skype.exe
  LinksLauncher.exe: 8:1: C:\Links 2003\LinksLauncher.exe
  LINKSMMIII. EXE: 08:16: C:\Links 2003\LINKSMMIII. EXE

  Version numbers of DLLS
  ===================
  Msvcrt.DLL - Version 7.0.7600.16385 - found in C:\Windows\system32
  'Msvcrtd.dll' is not found
  Msvcirt.DLL - Version 6.1.7600.16385 - found in C:\Windows\system32
  'Msvcirtd.dll' is not found
  amstream.DLL - Version 6.6.7600.16385
  Quartz.DLL - Version 6.6.7600.16385
  Ir50_32.DLL - Version R.5.10.15.2.55
  Dsound.DLL - Version 6.1.7600.16385
  Dinput.DLL - Version 6.1.7600.16385
  D3dim.DLL - Version 6.1.7600.16385
  Ddraw.DLL - Version 6.1.7600.16385
  dplayx.DLL - Version 6.1.7600.16385

  Audio device 0 (current) - (HW disabled mix)
  ==============
  Description: Realtek Digital Output (Optical) (Realtek High Definition Audio)
  Driver file: {0.0.0.00000000}. {cdc8ecc5-7109-4d8d-9ac9-dacfb4f56528}
  Data of the driver file: can not find the driver file
  CERTIFIED: No.
  EMULDRIVER: No.
  CONTINUOUSRATE: Yes
  PRIMARYMONO: Yes
  PRIMARYSTEREO: Yes
  PRIMARY8BIT: Yes
  PRIMARY16BIT: Yes
  SECONDARYMONO: Yes
  SECONDARYSTEREO: Yes
  SECONDARY8BIT: Yes
  SECONDARY16BIT: Yes
  MinSecondarySampleRate: 100
  MaxSecondarySampleRate: 200000
  PrimaryBuffers: 1
  MaxHwMixingAllBuffers: 1
  MaxHwMixingStaticBuffers: 1
  MaxHwMixingStreamingBuffers: 1
  FreeHwMixingAllBuffers: 0
  FreeHwMixingStaticBuffers: 0
  FreeHwMixingStreamingBuffers: 0
  MaxHw3DAllBuffers: 0
  MaxHw3DStaticBuffers: 0
  MaxHw3DStreamingBuffers: 0
  FreeHw3DAllBuffers: 0
  FreeHw3DStaticBuffers: 0
  FreeHw3DStreamingBuffers: 0
  TotalHwMemBytes: 0
  FreeHwMemBytes: 0
  MaxContigFreeHwMemBytes: 0
  UnlockTransferRateHwBuffers: 0
  PlayCpuOverheadSwBuffers: 0

  Video device 0
  ==============
  Description: NVIDIA GeForce GT 220
  Company / Chipset: nVidia.
  Driver file: nvd3dum.dll
  Driver size: 9 386 600 bytes
  Driver date: 22:55:32 Saturday 4/3/2010
  Attributes: Final Version, Private Build
  Driver version: 8.17.11.9745
  Version: 8.17.11.9745
  Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
  Video memory: 2,375,872,512 bytes (2266 Meg)
  Mem texture map: 1,034,485,760 bytes (987 Meg)
  AGP texture memory: 1,341,386,752 bytes (1279 Meg)
  Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
  Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
  Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
  modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
  mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
  CERTIFIED: No.
  DRAWPRIMITIVES2: Yes
  DRAWPRIMITIVES2EX: Yes
  DRAWPRIMTLVERTEX: Yes
  FLIPINTERVAL: Yes
  FLIPNOVSYNC: Yes
  NO2DDURING3DSCENE: No.
  NONLOCALVIDMEM: Yes
  NOPAGELOCKREQUIRED: No.
  CALIBRATE the GAMMA: No.
  PRIMARYGAMMA: Yes
  ZBuffer: 16 24
  Rendering depth: 16 32
  Texture size: 1 x 1 to 8192 x 8192
  Maximum U, v coords: 8192.0
  Cutting guard :-100000000,-100000000 to 100000000,100000000
  AlphaTest NotEqual: Yes
  Lack of mixture of the CBC:
  Lack of mixture Dest:
  Texture AGP: Yes
  Texture coords: 8
  Mix the steps: 8
  The Textures of max: 8
  Hardware T & L: Yes
  Vertex Blending: 4
  Maximum lights: 8
  Clip planes: 8
  Mix Lightmap: Ok
  Mix Specularmap: Ok
  Mixture of detail: Ok
  Vid linear memory: Yes
  SELECTARG1: Yes
  SELECTARG2: Yes
  ADD: Yes
  ADDSIGNED: Yes
  SUBTRACT: Yes
  MODULATE: Yes
  MODULATE2X: Yes
  MODULATE4X: Yes
  BLENDCURRENTALPHA: Yes
  BLENDDIFFUSEALPHA: Yes
  BLENDTEXTUREALPHA: Yes
  BUMPENVMAP: Yes
  BUMPENVMAPLUMINANCE: Yes
  DOTPRODUCT3: Yes
  ANISOTROPY: Yes
  ANTIALIASSORTINDEP: Yes
  FOGTABLE: Yes
  FOGVERTEX: Yes
  FOGRANGE: Yes
  WFOG: Yes
  WBUFFER: No.
  MIPMAPLODBIAS: Yes
  WBUFFER: No.
  ZBUFFERLESSHSR: No.
  MIPNEAREST: Yes
  LINEARMIPLINEAR: Yes
  DONOTSTRIPELEMENTS: Yes
  TEXTURE CLAMP: Yes
  BORDER TEXTURE: Yes
  MIRROR of TEXTURE: Yes
  ALPHAGOURAUDBLEND: Yes
  SQUAREONLY: No.
  COLORFLATMONO: Yes
  COLORGOURAUDMONO: Yes
  COLORFLATRGB: Yes
  COLORGOURAUDRGB: Yes
  SPECULARFLATRGB: Yes
  SPECULARGOURAUDRGB: No.

  Video device 1
  ==============
  Description: NVIDIA GeForce GT 220
  Company / Chipset: nVidia.
  Driver file: nvd3dum.dll
  Driver size: 9 386 600 bytes
  Driver date: 22:55:32 Saturday 4/3/2010
  Attributes: Final Version, Private Build
  Driver version: 8.17.11.9745
  Version: 8.17.11.9745
  Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
  Video memory: 2,375,872,512 bytes (2266 Meg)
  Mem texture map: 1,034,485,760 bytes (987 Meg)
  AGP texture memory: 1,341,386,752 bytes (1279 Meg)
  Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
  Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
  Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
  modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
  mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
  CERTIFIED: No.
  DRAWPRIMITIVES2: Yes
  DRAWPRIMITIVES2EX: Yes
  DRAWPRIMTLVERTEX: Yes
  FLIPINTERVAL: Yes
  FLIPNOVSYNC: Yes
  NO2DDURING3DSCENE: No.
  NONLOCALVIDMEM: Yes
  NOPAGELOCKREQUIRED: No.
  CALIBRATE the GAMMA: No.
  PRIMARYGAMMA: Yes
  ZBuffer: 16 24
  Rendering depth: 16 32
  Texture size: 1 x 1 to 8192 x 8192
  Maximum U, v coords: 8192.0
  Cutting guard :-100000000,-100000000 to 100000000,100000000
  AlphaTest NotEqual: Yes
  Lack of mixture of the CBC:
  Lack of mixture Dest:
  Texture AGP: Yes
  Texture coords: 8
  Mix the steps: 8
  The Textures of max: 8
  Hardware T & L: Yes
  Vertex Blending: 4
  Maximum lights: 8
  Clip planes: 8
  Mix Lightmap: Ok
  Mix Specularmap: Ok
  Mixture of detail: Ok
  Vid linear memory: Yes
  SELECTARG1: Yes
  SELECTARG2: Yes
  ADD: Yes
  ADDSIGNED: Yes
  SUBTRACT: Yes
  MODULATE: Yes
  MODULATE2X: Yes
  MODULATE4X: Yes
  BLENDCURRENTALPHA: Yes
  BLENDDIFFUSEALPHA: Yes
  BLENDTEXTUREALPHA: Yes
  BUMPENVMAP: Yes
  BUMPENVMAPLUMINANCE: Yes
  DOTPRODUCT3: Yes
  ANISOTROPY: Yes
  ANTIALIASSORTINDEP: Yes
  FOGTABLE: Yes
  FOGVERTEX: Yes
  FOGRANGE: Yes
  WFOG: Yes
  WBUFFER: No.
  MIPMAPLODBIAS: Yes
  WBUFFER: No.
  ZBUFFERLESSHSR: No.
  MIPNEAREST: Yes
  LINEARMIPLINEAR: Yes
  DONOTSTRIPELEMENTS: Yes
  TEXTURE CLAMP: Yes
  BORDER TEXTURE: Yes
  MIRROR of TEXTURE: Yes
  ALPHAGOURAUDBLEND: Yes
  SQUAREONLY: No.
  COLORFLATMONO: Yes
  COLORGOURAUDMONO: Yes
  COLORFLATRGB: Yes
  COLORGOURAUDRGB: Yes
  SPECULARFLATRGB: Yes
  SPECULARGOURAUDRGB: No.

  Hello again,

  I want to thank each and everyone of you for your input to try to help solve the problems I've had with links.

  I am happy to report that I played my first round in nearly two weeks in this... Morning. The problem is a corrupted file, .l3. I have a little more 1 100 PoliAnis' and am not sure which one is, but I can play. I tried whenever I took one of the following folders on until I finally took the PolyAni folder:

  WAVs, mops, Custom photos of players, sky, Clubs, PIN code files and finally, all but one of PolyAni files. That after taking all but one of the frequented out of the folder PolyAni links has started without giving me the error of attribution not valid.

  Thanks again to you all for your help.

  Sincerely,

  Mike

  Really_Rotten

• Test at startup "memory Test: FAILED.

  Hello

  HP ENVY Notebook PC m6

  64-bit Windows 8

  8 GB of RAM (2 x 4 GB)

  I got a lot of blue screen errors so I made a diagnosis of start-up perform F2 at startup of the system and that's what I found:

  Test at startup

  Processor Check: PAST

  Memory test: FAILED

  Starting test: FAILED

  Failure ID: U08K9R-6AE6S3-XD7X1F - 407 X 03

  Product: C2C18EA #ABU
  Memory module

  Any suggestions?

  Thanks in advance.

  Hello Rahat,

  Start diagnostics is buit to check if there is hardware with computer problems.  He has failed the test of memory which means that one of the memory on the computer module has failed and must be replaced.

  If the computer is under warranty, I suggest you come in contact with HP Service Center and solve this problem.

  Concerning

  MathewT

• Pavillion G6-1240sa: G6-1240sa Pavillion: BSOD repetition and memory test failed

  Hello

  I get errors blue screen on my G6-1240sa laptop running Windows 7 (64-bit).

  SYSTEM_SERVICE_EXCEPTION

  Technical information:

  STOP: 0X0000003B (0XFFFFF80002F2D15F, 0XFFFFF880078CCB50, 0X00000000C0000005, 0 X 0000000000000000)

  I made Diagnostics, accessed through the F2 key on startup and make me

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MQ-MFPV4K-405503

  Product ID: A3S574EA #ABU

  Memory module

  I removed the laptop 2 GB module, a 4 GB module is also present. After re - run the test, I got:

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MR-MFPV4K - 405M 03

  Can someone help me with this?

  Thank you

  Hello

  Remove a RAM and run a test at the same time, if the test fails on both the RAM. You will need to replace both. If this is not the case, replace the one that fails the tests of RAM.

• A desktop heap allocation failed

  Hello

  I hope this is the right forum for this question.

  I receive a desktop heap allocation failed in an installation of Windows Server 2012 Standard Edition. Below are the details of the error.

  Before I could use Desktop Heap Monitor to inspect the lots of the Office to check what section should be increased. Unfortunately there is no monitor Desktop for Windows Server 2012 bunch.

  So the question is how to determine which section should be increased to address the desktop heap allocation failure?

  Note: I found another method to query the windb desktop heap. The problem with this method is that I can not good symbols for win32k.sys that prevents the command from running.
  Here are the steps:
  (1) enable local debugging (bcdedit/debug on)
  (2) restart
  (3) run windbg (debugging or local kernel using livekd)
  (4) run! dskheap

  It is the output:
  LKD >! dskheap
  DBGHELP: win32k - private symbols
  D:\Apps\Windows Kits\Debuggers\x64\sym\win32k.pdb\4FC5EE0655E4409DAFE819E4002E10762\win32k.pdb
  Error reading station WINDOWS @ fffffa800449af40 rpdeskList
  Could not count the desktops to Winsta @fffffa800449af40
  EnumDsktps failed on Winsta: 449af40FillWinstaArray failed

  I tried to reload symbols, but this did not help.

  Details of the event log:
  Log name: System
  Source: Win32k
  Date: 2013-04-11 10:12:31
  Event ID: 243
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: xxxxxx.xxxxxx.xxxxxx
  Description:
  A desktop heap allocation failed.
  The event XML:
  
   
     
      243
      3
      0
      0 x 80000000000000
     
      8117
      System
      XXXXXX.xxxxxx.xxxxxx
     
   
   
     
     
      000000000100000000000000F3000080000000000000000000000000000000000000000000000000
   
  

  Thank you

  Hi Scherrit,

   

  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

  For any information related to Windows, feel free to get back to us.

• Error memory in the construction of modules with Module

  OPA dear developers,

  Need your help around one of the new features of 10.4 OPA's Modules.

  I have two rulebases A and B.  While the modules A, I would like to be able to determine the results of the policies written in modules B.  So I created a module off B modules (select Build Module), has opened the project to the modules A and connected the output B modules in modules A .rmod (folder Modules > add a Module link..)

  When I try to debug without screens, construction is successful and I am able to investigate the rules in here B modules.  However, when I debug with screens, build and run for CONTROLLED substances, or build and run in OWD, they all prompt a strace pile on the screen.  The cause of the exception is a "means: Java heap space".

  If I build separately these rulebases, it works very well and no errors.  It happens when one becomes the other module.  How this error memory can be fixed?  I paste the entire error message below in the hope of helping the investigation.  (Sorry for the long text..)

  Any help to make this work is appreciated.  Thank you!

  HTTP status 500

  exception

  1. javax.servlet.ServletException: Servlet.init () for servlet WebDeterminationsServlet threw the exception

  org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)

  org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)

  org. Apache.Coyote.http11.Http11Processor.Process (Http11Processor.Java:879)

  org. Apache.Coyote.http11.Http11BaseProtocol$ Http11ConnectionHandler.processConnection (Http11BaseProtocol.Java:665)

  org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)

  org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)

  org.apache.tomcat.util.threads.ThreadPool$ ControlRunnable.run (ThreadPool.java:689)

  java.lang.Thread.run (unknown Source)

  first cause

  1. means: Java heap space

  org.apache.xerces.dom.DeferredDocumentImpl.getNodeObject (unknown Source)

  org.apache.xerces.dom.DeferredElementNSImpl.synchronizeData (unknown Source)

  org.apache.xerces.dom.ElementNSImpl.getNamespaceURI (unknown Source)

  org. Apache.Xml.DTM.Ref.dom2dtm.DOM2DTM.AddNode (DOM2DTM. Java:262)

  org. Apache.Xml.DTM.Ref.dom2dtm.DOM2DTM.nextNode (DOM2DTM. Java:523)

  org.apache.xml.dtm.ref.DTMDefaultBase._nextsib(DTMDefaultBase.java:565)

  org.apache.xml.dtm.ref.DTMDefaultBase.getNextSibling(DTMDefaultBase.java:1142)

  org.apache.xml.dtm.ref.DTMDefaultBaseTraversers$ ChildTraverser.next (DTMDefaultBaseTraversers.java:463)

  org.apache.xpath.axes.ChildTestIterator.getNextNode(ChildTestIterator.java:83)

  org.apache.xpath.axes.BasicTestIterator.nextNode(BasicTestIterator.java:170)

  org.apache.xpath.axes.NodeSequence.nextNode(NodeSequence.java:335)

  org.apache.xpath.axes.NodeSequence.runTo(NodeSequence.java:494)

  org.apache.xml.dtm.ref.DTMNodeList. < init > (DTMNodeList.java:81)

  org.apache.xpath.objects.XNodeSet.nodelist(XNodeSet.java:346)

  org.apache.xpath.jaxp.XPathImpl.getResultAsType(XPathImpl.java:329)

  org.apache.xpath.jaxp.XPathImpl.evaluate(XPathImpl.java:282)

  com.oracle.determinations.util.xml.dom.XmlElement.selectElements(XmlElement.java:89)

  com.oracle.determinations.util.xml.dom.XmlElement.selectElements(XmlElement.java:81)

  com.oracle.determinations.engine.local.modules.Module.loadDataModel(Module.java:295)

  com.oracle.determinations.engine.local.modules.Module. < init > (Module.java:56)

  com.oracle.determinations.engine.local.modules.ModuleLoader.loadChildModules(ModuleLoader.java:72)

  com.oracle.determinations.engine.local.modules.ModuleLoader.loadModules(ModuleLoader.java:56)

  com.oracle.determinations.engine.local.modules.ModuleLoader.createUnifiedRulebase(ModuleLoader.java:31)

  com.oracle.determinations.engine.local.RulebaseLoader.createUnifiedRulebase(RulebaseLoader.java:141)

  com.oracle.determinations.interview.engine.local.LocalRulebaseService.applyChangeSet(LocalRulebaseService.java:243)

  com.oracle.determinations.interview.engine.plugins.rulebaseresolver.ClassloaderRulebaseResolverPlugin.initialise(ClassloaderRulebaseResolverPlugin.java:73)

  com.oracle.determinations.interview.engine.local.LocalRulebaseService. < init > (LocalRulebaseService.java:53)

  com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:181)

  com.oracle.determinations.interview.engine.local.LocalInterviewEngine. < init > (LocalInterviewEngine.java:66)

  com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19)

  com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:180)

  com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext. < init > (WebDeterminationsServletContext.java:116)

  Hello

  You can increase the size of the segment for the built-in Tomcat server.

  In OPM, go to tools > Options > Embedded Server, you should see under "Server Properties":

  -Xms200m-Xmx200m - Ddeploy.enabled = true

  You can just up the memory of something like:

  -Xms512m-Xmx512m - Ddeploy.enabled = true

  I normally encountered this in rulebases with many alleged (and deducted from the instances) relationships / aliasing / scope of operators etc... You can try your performance rules ensuring that the common logic is grouped in a single intermediate attribute rather than explicitly used each time.

  I don't know if it's the 'official' line but this has worked for me in the past.

  Thank you

  Ben

• Linux kernel parameters and Oracle memory allocations.

  I'm currently creating an Oracle 11 G R2 in database, on a Linux (SLES 11) OS. The software OS and DB are the two 64-bit.
  I wondered about the optimal method of memory allocation shared, such that I can get the automatic memory management to recognize 12G of memory (which allows 4 g for the operating system and other pieces).
  
  I put the kernel parameters are:
  SHMMAX: 8589934592 (the recommended physical memory/2).
  SHMALL: 3145728 (giving a total of 12 GB of shared memory allocation that the page size is 4096).
  
  The way I read the documentation, it must free up enough shared memory to allow the specification of a memory_max_target and memory_target "11 g". I'm getting 11G to ensure that I am not ruin by a few bytes (if it all works, I will develop to 12G).
  However, whenever I try a startup, I get the ' ORA-00845: not supported on this system MEMORY_TARGET' error.
  It disappears if I create a great shmfs block using a mount command, but I was under the impression you had is no longer to do with 64-bit and Oracle 11 G system.
  
  Could someone clarify a little bit about what I'm doing wrong and where I should be looking for the answer?
  
  See you soon,.
  
  Rich

  Note 749851.1 ID and ID 460506.1:

  AMM all SGA memory is attributed by creating the files under/dev/SHM. When Oracle DB not allowances of SGA that HugePages reserved/does not serve. The use of the AMM is absolutely incompatible with HugePages.

  eseentially, AMM requires that/dev/SHM.

• Change the memory allocated for the graphics?

  Hi, I have an Equium A60-181 with graphics ATi Mobility Radeon 7000. For the moment, that this GPU is using 64 MB of my system RAM that result with only 448 MB of RAM (512-64) for Windows. For a video resolution of 1024 x 768 32 bit it's a ridiculous amount of memory since it only really requires 4 MB for this. I'm not interested in games or 3d graphics, so my question is if I can change the memory allocated to recover more memory system?

  see you soon,

  Richard S.

  HI Richard,

  ATi drivers include an improved graphics option devices-> display manager that allows the value of the AMU to change. My SA30 supports load 16 MB, 32 MB, 64 MB and 128 MB.

  The same value UMA adjustable in BIOS Setup Panel.

  HTH

• Memory retains increaing and this VI a lot of resizing of memory allocation events

  This application increases slowly the memory and after 12 hours, I'll get labview for error memory. With the desktop execution Trace Tool kit, I found Vi (attached) is called a lot and a lot of memorry allocate, free one resize events.

  I have this Aplication but I see that the reference is not closed, I do not see the leaks of reference on the destkop trace Toolkit

  guys do you have an idea what could be?

  After 17 hours and 47 minutes the progam still works. These reference was the problem. they appear to be leaks of reference on the trail of the funds taken kit until I closed the program.

  Thank you

• Get the DLL string (memory allocated for DLL)

  Hi, I'm aware there are a lot of discussions around this topic, but there are a lot of variations and I've never used before LabVIEW, and I seem to have a hard time at a very basic level, so I hope someone can help me with the below simple specific test case to put me on the right track before I pull my hair remaining.

  I've created a DLL with a single function "GenerateGreeting". When it is called, it allocates enough memory for the string "Hello World!" \0"at the pGreeting of pointer, copy this string to the pointer and sets the GreetingLength parameter to the number of allocated bytes (in the DLL in the end, I want to use, there is a DLL function to free the memory allocated for this way).

  I created a header file to go with the DLL containing the following line.

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  I then imported the LabVIEW file using the import Shared Library Wizard. That created a "generate Greeting.vi' and everything seems somewhat sensitive for me (although this does not mean a lot right now). When I run the vi, the ' GreetingLength on ' display correctly '13', the length of the string, but "pGreeting out" shows only three or four characters (which vary in each race), place of the string that is expected of junk.

  The pGreeting parameter is set to the 'String' type, the string "String pointer C" format, size currently Minimum of 4095. I think the problem is that the DLL wants to allocate memory for pGreeting; the caller is supposed to pass a unallocated pointer and let the DLL allocates memory for the string the right amount, but LabVIEW expected the DLL to write in its buffer préallouée. How to with LabVIEW? Most of the functions in the DLL in the end, I want to use work this way, so I hope that's possible. Or I have to rewrite all my DLL functions to use buffers allocated by the appellant?

  The vi , header and the DLL are atteched, tips appreciated. Edit - cannot attach the dll or the headers.

  tony_si wrote:

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  Although char * & pGreeting is actually a thing of C++ (no C compiler I know would accept it) and this basically means that the char pointer is passed as a reference. So, technically, it's a double referenced pointer, however nothing in C++ Specifies that reference parameters should be implemented as a pointer at the hardware level. So free to decide to use some other possible MECHANISM that takes the target CPU architecture support a C compiler constructor. However, for the C++ compilers, I know it's really just syntactic sugar and is implemented internally as a pointer.

  LabVIEW has no type of data that allows to configure this directly. You will have to configure it as a whole size pointer passed as a pointer value and then use a call MoveBlock() or the support VI GetValuePtr() to copy the data on the pointer in a string of LabVIEW.

  AND: You need to know how the DLL allocates the pointer so that you can deallocate it correctly after each call to this function. Otherwise you probably create a leak memory, since you say that the first 4 bytes in the returned buffer always change, this feature seems to assign to each run of a new buffer that you want to deallocate correctly. Unless the DLL uses a Windows such as HeapAlloc() API function for this, it should also export a function according to deallocate the buffer. Functions like malloc() and free() from the C runtime cannot always be applied in the same version between the caller and callee, so that calling free() by calling on a buffer that has been allocated with malloc() in the DLL may not work on the same segment of memory and result in undefined behavior.

• error "memory is full" with writing a file permanently PDM

  Hello world

  I know that the problem of "memory we complete" has been often discussed in this forum, and I have read these messages, but still could not solve the problem.

  We have implemented a test function based on PXI5412 and 5122 modules. The program generates arbitrary waveforms to excite a DUT and acquires its response with digitizer and writing of the data acquired in a TDMS file (~ 40 MB for each measuring point). The program works fine in single point mode, i.e. in quiet passages. However, when I try to run it continuously in a loop TO measure several (up to 1,000) points, the program is always interrupted at halfway when ~ 10 GB of data is recorded with an error "memory is full".

  My computer has 4 GB of RAM and the operating system is Windows XP Professional 32-bit. I checked the RAM usage when the error "memory is full" happened. in fact we at least 2.5 GB unused. I learned that maybe it's because he is not a continuous free space in RAM for data. It is also suggested to increase virtual memory to 3 GB for Labview by modifying the boot.ini file. But after I did the program meets still another error "Invalid TDMS" the file reference, and so I could not write all data to a file of PDM.

  I joined the part of logging of data of my code here. Is there a another way around the problem of memory, as using the same block of memory for buffering of data between the memory of the digitizer and the hard drive?

  cheney_anu,

  I need to know your details of tdms files before I could provide a buffer appropriate setting.

  for example,.

  The current design: you write a tdms 40 GB file that contains 1000 groups (a point a group), each group contains 1,000 channels and each channel contains 1 d I16 table with 20 M of length. (Note: this 40 GB tdms file contains 1000 x 1000 = 1 M channels)

  Change:, you could write 1 d I16 table instead of table I16 2D, which could reduce the number of channel 1 M 1 k, and then reduce the memory usage.

  New design: you write a tdms 40 GB file that contains 1000 groups (a point a group), each group contains 1 channel and each channel contains 1 d I16 array with length 20G (for each point, call 'TDMS write' 1000 times in a "loop For ' and every time write 1 d I16 array with length 20 M). (Note: this 40 GB tdms file contains 1000 x 1 = 1 K channels)

• Change THE Memory Allocation 6.0.

  I own a 7 '' netbook Sylvania, with 128 MB of RAM and Windows CE 6.0 OS. There the cursor to change the memory allocation between the PROGRAM and the STORAGE, but it won't budge. To get YouTube running on this thing, I need to go 68 MB of RAM allocated to executing programs for about 130 MB, taking storage (use an SD card to make up the difference - easy). Is there a way to unlock the slide or modify the default setting through the registry hive files? I have already made some adjustments with explore in this way and have managed to add a file to it. I understand in hex. Thank you!

  Hello GusCD6,

  The best place to ask your question on Windows CE 6.0 is in the MSDN forums for the development of Windows Mobile. Click here for a link to the Windows Mobile Development Forum.
  They are there, the experts and would be better able to solve your problem of Windows CE and help answer your questions.

  Sincerely,

  Marilyn