Error #16824: Incorrect Version on the automatic update attempt...

Similar Questions

• This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update has not as well.

  This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update 4/16 showed failure: update for Microsoft Office PowerPoint 2007 (KB 24664594)

  Hi William,.

  First try the following article: http://support.microsoft.com/kb/971058.

  If this does not work, try this link: http://support.microsoft.com/kb/923100.

  While I'm not quite certain that the first will succeed, the second is a common and often recommended solution that has helped a lot with this error code.

  I hope this helps.

  Good luck!

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Download Microsoft Office Home & Student 2007 but the automatic updates do not work.

  Hello. Thanks in advance for your help here.

  I am at a loss to know what to do.

  Recently, I downloaded Microsoft Office Home & Student 2007, which seems to be very well. The problem is the automatic updates do not work. After searching online, I did the start > run > Winver and he says I have Service Pack 3. Then I went to control panel in Add/Remove Programs, and even if it is listed, there is no indication that it is actually installed.

  I remember a year or there are problems with SP3, when I tried to upgrade to IE8 so "I THINK" I removed it. Probably shouldn't have done that!  But IE8 has worked fine once I removed it. Microsoft says that we will no longer receive automatic updates to SP2 in June and so we have to upgrade to SP3.  Well, I just don't know what I have on my computer at this point!

  Anyway, now I get these failed messages on the updates for the Office:

  The 2007 Microsoft Office Suite Service Pack 2 (SP2)
  Update for Microsoft Office System 2007 (KB967642)
  Update of security for Microsoft Office System 2007 (KB951944)
  Update of security for Microsoft Office 2007 (KB951550)

  So I thought I'd download the SP2.  But I did not know if Microsoft .NET Framework 2.0 Service Pack 2 actually means I have SP2 installed or not.  And I got in such a mess last year I don't want to take any chances again.

  I'm sorry that it is a message that is too long. I tried to print screens to attach more information, but that did not work. Let me know what you need.

  Thank you very much in advance for your help.

  Diane

  I found more information. Looking in my history of update for automatic updates, all 4 of these updates failed have the same error Code which is: 0 x 80070663.  I don't know if this info helps solve this problem or not, but that's it.

  Hello
   
  
  a. you are able to download and install updates in Windows other than Microsoft Office?
  
  If you have SP3 listed in the Windows Version (winver) which ensures that you have Windows XP SP3 installed.
   
  Let us download the updates manually and install them, here are the links to download.
   
  The 2007 Microsoft Office Suite Service Pack 2 (SP2)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B444BF18-79EA-46C6-8A81-9DB49B4AB6E5&displaylang=en
  
  Update for Microsoft Office System 2007 (KB967642)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=E93AB1BE-ADE6-4ff8-8637-DBD3EBE3C5C5 & displaylang = SL & displaylang = in
   
  Update of security for Microsoft Office System 2007 (KB951944)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=fb457536-26c5-428B-97E4-1fc13718266e&displaylang=en
   
  2007 (KB951550) security update for Microsoft Office System
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=27b06ee8-570a-4dc2-A230-c70d4a706245&displaylang=en
   
   
  Note: Make sure also that you have the prerequisites installed as indicated in the articles above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• A lot of problems since I ran the automatic updates

  I had a problem with the automatic updates: all updates to update installed, but for one of them. This is what happened:

  The microsoft security update. Error NET framework 1.1 SPI (my computer is a windows XP version 2002 service pack 3, there was also this (KB2698023) with the error.)

  Then, the next time I turned on my computer it says error 0 x 643,.

  Then error hpqthb08. exe, NET framework, and then application

  KGshare application error,

  I decided to uninstall some things in my add/remove program and then run the automatic updates again and he said that I got none, none.  I was surprised and very confused,

  AND now, by turning on my computer it says error oxc0150002.

  I guess I had a full blown virus now right?  Can someone help me. I can't wait to take my computer to get my computer fixed. My computer has Norton 360 antivirus on it, before this one, I got the Norton one security.

  I already spent a lot on this old computer. Can someone help me with these problems?

  Hi MarilynM,

  With the clarification you have provided, I think that Davee had the right idea in the second post, for you to take advantage of the tool .NET Framework. Click on the link provided by Davee and read the guide on how to run the tool of.

  For more information about how to resolve this problem, see this link

  http://support.Microsoft.com/kb/976982

  Cleaning of .net framework tool.

  http://blogs.msdn.com/b/astebner/archive/2012/08/04/10336934.aspx

  The .net framework Cleanup tool user guide.

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Let us know if this helped.

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Incorrect version of the driver of VMD. SYS

  Hi all

  I've been running a VM Win7 in a [Workstation 12 Pro] for a couple of months now without problem and since VM 12 PRO was last updated, I'm not able to start my VM Win7 more. The host operating system is Win10. The error I get is «incorrect version of the driver of VMD.» SYS"(see attachment). The only information I can find here is to uninstall and reinstall... My concern is that I don't know if I lose my data making VDISK.

  HELP HELP

  It worked... THANKS A BUNCH, really appreciate your quick response...

  Bill

• I have disabled the automatic update, but it will however update! How to disable?

  I use version 34 and I don't want to update becase the plugins work correctly with the newer versions. I disabled the automatic updates check in preferences, but updates of firefox sometimes! It makes me very angry, I'm tired to restore my backups. What should I do to prevent the automatic update forever! I'll be able to update the program if I need!

  Mozilla Maintenance Service can be updated Firefox for you. Disabling updates of Firefox does not stop this 'service' to make updates.
  https://support.Mozilla.org/en-us/KB/what-Mozilla-maintenance-service

• The automatic update on Firefox poses a security problem as they say some sites

  I just noticed that some sites say that the automatic update of Firefox is a security risk and I was wondering if it was true

  No, it isn't. people work to update firefox to make it better and safer. and most recent version allows to block the pulgin in any page and indicates same elem in a secure page. It therefore becomes safer. Security risk may be running plugins such as java, shockwave etc so only run on trusted sites.

• Unable to connect to the internet after the automatic update

  Firefox has an auto update this morning and since then I always get the page "the connection was reset". MSN messenger work always for the internet connection is not the problem. It's on my laptop (I'm currently on my PC) and it is on Windows XP, the firewall is ESET Smart Security. I checked the error Console, and it is one that appears, "" Livemark Service: food processor received invalid channel for http://en-US.fxfeeds.mozilla.com/en-US/Firefox/Headlines.xml".

  This has happened

  Each time Firefox opened

  Is automatic update on June 27, 2010

  NVM I just had to change the automatic proxy connection settings
  the automatic update should have changed the settings

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• I disabled the automatic updates and it starts to turn itself on, W H Y?

  "WINDOWS XP HOME SP2 '!

  I have disabled the automatic update and it starts itself to spin, WHY?

  HOW DO I KILL IT?

  I want all the crud that microsoft that will come to me.

  Hi Gail,

   

  You run the computer as an administrator?

  Method 1: You can run the fixit available in the article below from the off-ramp of Windows Update and then check if it makes a difference

  How to configure and use automatic updates in Windows

  http://support.Microsoft.com/kb/306525

  Method 2: You can see the steps outlined in the article below

   

  How do I turn off the Windows Update feature in Windows XP

  http://support.Microsoft.com/kb/892894

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Note: It is not recommended to disable Windows Update, automatic update, you do not have to search for updates online or worry that critical fixes for Windows might be missing from your computer. Windows automatically checks for updates for your computer.