Error 41 when I try to print

Similar Questions

• Error message when you try to print

  I received the following error message when you try to print a document.

  "Spooler subsystem App stopped working and was closed.  Production of Windows warn if the solution is available.

  I have not had any problems with my printer up to today.  How will I be notified by Windows and is there anything else I can do.

  Are you facing this problem when you print using all applications?

  Take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• I get a 0xc18a0306 error code when I try to print anyone can tell me what it is please.

  I have a HP photosmart C8180 printer all in one and when I try to print all I get is an error 0xc18a0306 and he then told me to turn printer off then on again. Someone at - it ideas please.

  Hello

  Please see the link below for the problems on the issue.

  http://support.HP.com/us-en/document/c03081973

• How to fix "Printer error state" when I try to print to the HP Laserjet 3030?

  Have not been able to find information on why my HP LaserJet 3030 printer cannot be used with the new computer from Samsung in Windows 8.  I chose driver for printer, but receive error messages - "Printer error state" or "Cannot find the output device" - when I try to print.  What can I do to fix this?

  Unplug the printer for PC > uninstall all printer drivers > restart PC > down load & install the correct driver from the HP Web site > reconnect and turn on printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&TaskID=135&cc=us&lang=en&prodSeriesId=378056&prodTypeId=18972

• Re: Error Message When you try to print to a network printer

  I just bought the new laptop, and when I try to print to a network printer (one that I always printed at front), I get a message: "The Active Directory Domain Services is currently unavailable" - I can't add a network printer at all! Help!

  Is there a setting I need to change to be able to add network printers?

  I think you should contact your local administrator and let him install this network printer. He knows how to install the correct driver and how to find the location of the printer.

• error message when you try to print from the windows photo gallery

  I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
  My printer is Dell V515w and is 4 months old.
  Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
  Thank you
  Richn13

  Hello
  See this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

  Let us know if it helps.

• After installing IE9, I get error messages when I try to print from a Web page

  original title: res://ieframe.dll/preview.js problem!

  I installed IE 9 since when I can't print pages on the web and my windows mail gets frozen. I get this message when you try to print, res://ieframe.dll/preview.js. I used online tools to analyze and repair sites, but it seems that I have to pay to make a repair, something nice, yes you have a problem, but we pay to do the sort! I can print from Chrome and Word docs. I have vista. Norton and I updated and used its own registry.

  Thank you very much.

  But before I saw the above I uninstalled IE9 and went back to IE8 and I coulld printing web pages and emails on the mail of the window. I'm in tears of happiness.

  Lesson, if it's not broke don't update.

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix a printer problem flashing causing an error message when I try to print an email from Thunderbird?

  This problem "and goes". When I get the error message, the 'Documents' page?

  Looks like you got Microsoft XPS Document Writer selected instead of your printer.
  As Matt said this isn't an error in Thunderbird. This is the error of the user by selecting the incorrect printer. After the opening of the printer dialog box, Thunderbird is done. It is at this time of your printer and your operating system. Make sure that your printer is displayed in the dialog box and not the XPS writer.
  If you have by mistake fact writer XPS your default printer using the control panel to fix this.

• Spooler subsystem app error message when you try to print. then my computer launches the printer offline

  I tried to delete all software, including drivers and then reinstall but have had absolutely no success. I should mention that I use a Lexmark printer and supposedly there are hidden drivers files that cannot be deleted. Any help would be appreciated

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Check with Lexmark Support and drivers

  Lexmark - Support
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  Lexmark - drivers
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error message when you try to print a P.C. LR 2.5. . .

  I don't really know why I get this error message - it reads like this:

  
  

  There is a (or however many there are) image in this print job that is not valid.  She may have been saved in an unsupported file format.  You will not be able to print this image.

  
  

  
  

  But the images were saved in LIGHTROOM!

  
  

  Here's what I did:
  (1) I shoot in RAW - download my photos on LR

  (2) change them accordingly

  (3) export and create a jpg file - they are now re-numbered sequentially.

  (4) I will then import the newly exported jpg back in to LR so that when I create a piece of evidence for my clients names/numbers... that's when I get the above mentioned error message!

  
  

  Help!

  
  

  What I did and how can I fix?

  
  

  Thank you!!

  Could you post one of the offending files? Which could give us some tips. Certainly, you should really have no problem any reimport the jpg file exported from Lightroom and print, even if you have to really make sure that you have enabled "treat files next to raw as a separate photo files jpeg" in the Panel preferences to import, otherwise you could get in the disorders strange if you reimport the jpeg file with the same filename exactly as your RAW files.

  Finally, the last version of the LR is 2.6.1 update at that.

• Get ink system failure-code-Oxc18a0201 error message when you try to print from C7180 printer

  Original title: C7180 printer all in one

  I'm unable to print I receive ink system failure-code-Oxc18a0201.

  HELP IF YOU CAN

  THANK YOU FOR YOUR TIME.

  Hello

  1. what operating system is installed on the computer?

  2. you use all-in-one printer, HP Photosmart C7180?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link mentioned below if you have HP printers and see if it helps.

  Error Oxc18a0201 INK system failure C7180

  Hope this information helps.

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• windows error message when I try to print on lexmark 5300

  Windows closes and then opens again tab

  Hello

  • What were the changes made before the issue started?
  • What is the exact error message that you receive?

  You can check this link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Enable two-way to care will not be checked if I get a communication error message when I try to print from my Lexmark Pro905 (using Windows 7 64-bit)

  Help, please!  I tried to fix this for HOURS, reading the TONS of info. on the Internet without success.  I have installed and reinstalled the software Lexmark a dozen times.  It installs Lexmark Pro900 Series (network) and Lexmark Pro900 series (USB).  The "two-way" box will remain enabled in the properties of the printer to the USB version but not the network version which is what I want to use (since I want to be wireless).  I have no idea how to solve this problem. Analysis of my computer, copy, etc, everything works fine with the printer... I can't print... it keeps saying "Communication not available" and check the box bidrectional.  I check, hit apply, then ok, but then when I go back into the properties of the printer it is more verified. :(

  Hi Nicole,.

  I suggest to read the article below and follow the instructions.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  See also the article given below to set the printer as the default printer.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  If the problem persists, I suggest you to contact the support of printer on the issue.

  http://www.Lexmark.com/en_US/about-us/company/contact-us.shtml

  If you have questions related to Windows, feel free to post. We're here to help.