Error-4960 when loading CS6 trial

Similar Questions

• Receive the KB 953691 error code when loading LifeCam 3.0

  Original title: kb/953691

  Dumm it down to a classified noncomputor like me, how or what I do to work around the kb/953691 error code when loading LifeCam 3.0? My LifeCam 1.2 has not had a problem with Vista, but does now with Windows 7.

  Thanks for any direction, wish MSM would take a direct responsibility with a patch rather than a group of form... Richard

  p.s., xxxx always Vista and Windows 7 on XP, could have been better with a Mac laptop and my XP PC on Vista/Win7 laptop!

  Hi Richard,

  You can try the following steps and check if it helps.

  Step 1:

  Reset the permissions for the folder to full access:

  a. Click Start, click Run, type Explorer.exe and then click OK.

  b. expand computer.

  > Locate the C:\Documents and Settings\folder \My Documents\LifeCam

  > Locate the C:\Users\folder \Pictures\LifeCam

  c. right click on the folder and then click Properties.

  d. on the Security tab, click Administrators, click full control under allow and then click on apply.

  e. on the Security tab, click System, click full control under allow and then click on apply.

  f. on the Security tab, click everyone, click on remove and then click OK.

  Step 2:

  Configure the firewall settings to allow LifeCam.exe:

  To examine and configure your firewall settings, follow these steps:

  a. Click Start, click Run, type wscui.cpl and then click OK.

  b. in the Windows Security Center, click Windows Firewall.

  c. the Exceptions tab to add program and port exceptions to allow certain types of inbound traffic. You can define a scope for each exception.

  d. Select LifeCam.exe and add it to the list of Exceptions.

  e. If you are using another firewall, check the manual to configure the firewall to add LifeCam.exe to the list of exceptions.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to solve the error 49 when the photoshop trial download?

  How to solve the error 49 when the photoshop trial download?

  Hello, Scarlett,.

  Please see the below help document to solve the problem:

  Download error, installation or update of Cloud Creative applications

  You can also see the thread below where the issue has been addressed:

  CC of Photoshop update failed. Download error 49

  Kind regards

  Sheena

• Error when loading CS6 HAVE have no downloads.

  This is the error that was created: Please help!  I use usually just HAVE.

  Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF006, DF016 ... WARNING: DF012 ...  -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 10 error(s), 2 warning(s)  ----------- Payload: {0D9E083D-1ABE-4B41-B04D-B79947317FF8} AdobeIdeaPluginCS6 1.0.0.0 ----------- ERROR: DF006: The path "/Applications/Adobe Illustrator CS6" already exists and is not a directory, Please rename or delete and retry(Seq 1) ERROR: DF016: Unable to create directory "/Applications/Adobe Illustrator CS6/Plug-ins.localized" with mode 775(Seq 1) ERROR: DF006: The path "/Applications/Adobe Illustrator CS6" already exists and is not a directory, cannot create path "/Applications/Adobe Illustrator CS6/Plug-ins.localized",Please rename/delete "/Applications/Adobe Illustrator CS6" and retry(Seq 1) ERROR: DW063: Command ARKCreateDirectoryCommand failed.(Seq 1) ----------- Payload: {39C9FB9C-7A84-11E1-B574-D095DF20721F} Adobe Fireworks CS6 12.0.0.0 ----------- WARNING: DF012: File/Folder does not exist at /Volumes/CS6 DesWebPrm/Adobe CS6 Design and Web Premium/payloads/AdobeFireworks12-mul/OEM(Seq 3600) ----------- Payload: {76A4887E-7A85-11E1-88DE-92A96E70B8CF} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 ----------- WARNING: DF012: File/Folder does not exist at /Volumes/CS6 DesWebPrm/Adobe CS6 Design and Web Premium/payloads/AdobeFireworks12en_USLanguagePack/OEM(Seq 84) ----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 ----------- ERROR: DF006: The path "/Applications/Adobe Illustrator CS6" already exists and is not a directory, Please rename or delete and retry(Seq 1) ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirfpcIKbJn/Assets1/Application/Icon " to "/Applications/Adobe Illustrator CS6/Icon " (Seq 1) ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1)  ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - AdobeIdeaPluginCS6: Install failed ERROR: DW050:  - Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack: Install failed ERROR: DW050:  - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure -------------------------------------------------------------------------------------

  https://helpx.Adobe.com/Creative-Suite/KB/error-exit-6-exit-7.html

• Error 101: After Effects Cs6 trial (not enough free disk space)

  

  This is the error I get when I try to download the trial of After Effects. There are more than 500 GB of free space on my computer. Trials of Photoshop and Dreamweaver downloaded fine, and Fabrice howmany times I try to re-download After Effects, yet, it will not work. I tried to uninstall the photoshop and Dreamweaver tests, I moved the destination folder for download in several different files (ie: C, Desktop, users, etc) nothing works.

  Help, please.

  I downloaded this last night PDT successfully, using the default settings of the user folder.  I managed.  Maybe try to download again.

  Alternatively, you can use the steps listed in http://forums.adobe.com/thread/981369 to launch a direct download.

• App integrated with Flash Builder 4.6 and compiled for iOS, error now when loading to the appstore

  I built a simple application using Flash Builder 4.6 and have successfully deployed to the Android Market (after testing on my own Android device).  I also took this same application and compiled for iOS and tested on my iPad.

  I then did the Release with the final 'Release for App Store Distribution' option in the release generation Wizard.  I have all the certificates supply correct in place and compiled the application in a .ipa file.

  At this point, you use a MAC, I ran the Application Loader utility to upload my app to itunesConnect portal to get it in the appstore.  I already went through the steps to enter metadata, pricing, and screenshots in itunes connect portal and just need to download it for review.

  When I download the .ipa file into the application loader, it gives me the following error:

  "iPhone/iPod Touch: contains executables of the application not supported architectures: arm.

  Anyone have any idea what this means and how I can fix this?  Any help is greatly appreciated!

  Thanks in advance!

  He solved.  Just add the following text in the tag for iPhone in my app descriptor XML file:

  UIRequiredDeviceCapabilities

  WiFi

  ARMv6

  ARMv7

• Error message when loading downloaded presets

  I down loaded the amimated presets.  I'm not quite sure they are supposed to do, they do nothing when I double click. It's a whole other issue.

  I have 2 accounts log.  One of the newspaper accounts, user 1, I get an error message (see table), and they take in.

  The other account, user 2, let's get everything up without any errors.  I think it's because I've downloaded and installed under the user 2 - don't know if.

  How can I get these presets to be available for user 1?

  fasteners are error messages and where they are in the window user 2 presets

  Thank you

  Make a right click--> information. At the lower end, you can see your user authorization settings. Open the lock and add your current user with full privileges (read/write).

  Mylenium

• Gauge Power Manager: An error occurred when loading Resource Dll

  Just installed windows 10. A dialog window opens immediately after the opening session, saying: gauge of Power Manager: "an error occurred loading resource dll. Power Manager pilot was updated using the System Update and Windows Update. Windows seems to work very well after closing the dialog box.

  Event log:

  The failing application name: rundll32.exe_PWMTR64V.dll, version: 10.0.10240.16384, time stamp: 0x559f39d6

  The failed module name: IMM32.dll_unloaded, version: 10.0.10240.16384, time stamp: 0x559f3b64

  Exception code: 0xc000041d

  Offset: 0x0000000000004c70

  ID of the process failed: 0x17bc

  Start time of application vulnerabilities: 0x01d0cc1e64ae9c62

  The failing application path: C:\WINDOWS\system32\rundll32.exe

  Path of the failing module: IMM32.dll

  Report ID: dc5d2634-1815-4621-9b48-fdd9d21c8ba8

  Faulting full name of the package:

  ID of the failed package-parent application:

  Solved. The error comes from the task by Lenovo power parameters. By disabling the task in the Task Scheduler, the error disappeared.

  This does not affect the function of parameters of Lenovo, just put a little slow to load power information.

• Error #1009 when loading SWF with Document class

  Hello

  I have two sovereigns, racingPreloader.swf and racingTrack1.swf funds, the other has a class of documents 'hands. RaceMain ".

  racingPreloader.swf is a preloader for racingTrack1.swf, but it does not work. Instead, I get the result:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  sector: RaceMain()

  I tried to enable debugging on both files and test it with Shift + Ctrl + Enter, but the result is substantially the same; It does not give me a specific line where is the problem.

  Try to launch and connect to player using URL H:\Swifter\racingPreloader.swf

  [SWF] H:\Swifter\racingPreloader.swf - 16102 bytes after decompression
  

  [SWF] H:\Swifter\racingTrack1.swf - 41869 bytes after decompression
  

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  sector: RaceMain()

  Cannot view the source code at this location

  
  

  This is very similar to what happened to this topic, but I couldn't solve my problem after not finding a solution in it.

  
  

  Here's the code to frame 1 of the racingPreloader.swf:

  
  

  var loader: Loader = new Loader();
  

  Loader.Load (new URLRequest ("racingTrack1.swf"));

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, openSWF);

  function openSWF(e:Event) {}

  addChild (loader)

  }

  And this is a part of the code to the sector. RacingMain class. I have omitted most of the code because I believe that these lines are the source of the problem:

  the packet network {}

  import flash.display.MovieClip;
  

  //... More import clausses

  SerializableAttribute public class RaceMain extends MovieClip {}
  

  public void RaceMain() {}

  if(stage==null)

  this.addEventListener (Event.ADDED_TO_STAGE, main);

  on the other

  hand (null);

  }

  private void main(e:Event):void {}

  start the game

  }

  }

  }
  

  
  

  Thank you.

  I just figured out that I was loading an old version of racingTrack1.swf with an unfixed food version. RaceMain class of document. I changed to the version with this fix and finally managed to do work.

• Error message when installing CS6

  While Adobe CS6 installing that arrived in the mail yesterday (Friday, 31 August) I get the following error message:

  

  How can I solve this problem?

  I bought my Adobe CS6 about a week or two ago on the official adobe site so my copy is legitimate.

  True verification failure

  Mylenium

• AE CC 2015.3 crashes when loading

  I get the following error report when loading AE CC 2015.3. This error occurs if run as Admin or not.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: AfterFX.exe

  Application version: 13.8.0.144

  Application timestamp: 57512541

  Fault Module name: cilkrts20.dll

  Fault Module Version: 2.0.4184.0

  Timestamp of Module error: 53684797

  Exception code: c0000005

  Exception offset: 000000000000c6f7

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Information additional 1:1277

  More information 2: 127757f4d1f3dfd83ff64ad60a507e54

  Additional information 3: b28c

  Additional information 4: b28c60d059a0b38ead93c9d9c8477cd5

  I ran the repair for Microsoft redistributable 2015 (both x 86 & x 64), but that does not alleviate the problem. I could solve the problem by deleting files of preferences that have been imported from the previous version of the AE. This forced AE to use default preferences, and I managed to load the program. I was then able to restore all preferences exactly as they were for the 2015.2 version and still had no problem. Not sure why the automatic import of these settings could cause a problem.

  I noticed that after updating the driver Nvidia to the last version that I was no longer able to set enable GPU tested for CUDA acceleration in the Previews of the AE preferences page. A message indicates that the card was not recognized. I had to go back to a previous version of the Nvidia driver in order to use the GPU again.

• LR5 and LR CC I get error message when importing from cf, using Win 10 card reader

  I tried to upgrade to CS6, update fails error U44mip7, Im using Win 10?

  I get this error message when updating CS6 U44MIP7

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• I get an error 0643 when you try to load updates

  I get an error 0643 when you try to load updates, ideas

  I get an error 0643 when you try to load updates, ideas

  This tutorial will Support MS work?

  http://support.Microsoft.com/kb/976982