Error 643 and 8004FF01 when installing updates

Similar Questions

• Error: "WindowsUpdate_8007063" and "WindowsUpdate_dt000" when installing updates in Windows 7 machine.

  Original title: 80070663 error code appears when...

  This error code is displayed when I try to manually update the "WindowsUpdate_8007063" and "WindowsUpdate_dt000".  The automatic update has not once or twice each of these 8 days or more.

  you have problems with

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you use Microsoft Office, you can run the Microsoft Fix it 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

• Get the codes of error 643 and 646 with these updates.

  I can not download successfully the following security updates:
  KB953297, KB978380, KB978382 and KB979895.  I get the error 643 and 646 code.

  brit007ca,
  Take a look at this article that she addresses your situation: Troubleshooting Windows Update: updated proposed several times

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Errors 8024402C, 643 and 646 when installing Windows updates

  Original title: 22 code 8024402C, 646, 643 update failure
  Just cancelled anti-wear Virus, now uning microsoft and find several updates not installed.

  I just need to know if updates from ore relevant or not.

  Hello

  Updates are highly recommended. Updates can help to prevent or fix problems, enhance the operation of your computer, or improve your computer
  experience.

  Update error 8024402C may occur for various reasons.

  Step 1:

  Check this link for troubleshooting steps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024402C

  Step 2:

  To fix the error 646, you can run the diagnostic article Fixit tool:
  http://support.Microsoft.com/kb/2258121

  Step 3:

  Run Fixit of this article to correct the error 643:
  
  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  After you complete the steps, check if you can install the updates.

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Vista - Error Codes: 643 and 646 (cannot install updates)

  A few months ago, I started getting a message when I tried to stop that I had to install 3 updates first.  The problem is installation has failed each time and the message "install 3 downloads" has been causing a delay important whenever I stopped while he goes through the motions of installing the updates.  But they do not have to install each time (according to the update on the computer folder.  I tried all the patches 'easy' and reluctant to mess with the patch that says am ' attention otherwise you will really cause a problem.  How can I solve this problem?

  Error code 643
  http://support.Microsoft.com/kb/923100/en-us

  Error code 646
  http://support.Microsoft.com/kb/2258121

  If the above doesn't work no help, please repost in Windows Update section:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Vista - Error Code: 643 and 646 (cannot install updates)

  I tried to do my downloads, and I'm getting reports of errors as follows:

  646

  643

  These say to go to the windows desktop and change the settings in the box OSE I think... no matter... I made the change he told me and I'm still not to install updates... it says, then attach it to pass windows... which I did and it also gave me a notice that failed with code 2738... Anyone know what to do? I have office windows 2003... Please help I have like 25 updates that have never been done because of this

  I need help please!

  http://support.Microsoft.com/kb/KB976982

  You receive error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft UpdateYou receive error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  646

  http://support.Microsoft.com/kb/2258121

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  Or try this:

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Get error 0 x 80070005 when installing updates for vista

  I tried the steps mentioned by Kim.

  I get the following error in the accesskchk file

  Error opening of HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.4.7600.226:
  The system cannot find the specified file.

  No matching items found.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1316 and 1603 when installing HP Active Support Library and Support HP

  Original title: Error 1316 and 1603 questions

  I am trying to install HP Active Support Library and HP support on my Vista laptop.  I keep running into the same mistakes: 1316.A network error occurred trying to read from the file c:\Windows\Installer\HP Library.msi active support - I then click ok and the installation is restored, and then I get the error: 1603 Fatal error during installation.  Consult windows help install (Msi.chm) or MSDN for more information. I looked in my windows folder and I have no file.  Can someone please tell me what to do?

  Hey, Lestat,.

  There is an article in the Knowledge Base by HP talking Error 1316 and 1603, during the installation of the HP software. Follow the suggestions listed in the links below and you should be good to go.

  Fatal error ' Error 1316. Network error occurred trying to read . "(MSI Error 1316) displays during the Installation of the software in Windows XP

  The steps described in the article above also apply to Vista.

  Fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 66A, 800706BE and 800706BA when installing updates.

  What should I do? All updates are important, and some have been waiting for a long time now that I have not had time to find solutions (and I'm still you wonder why should it be me who find solutions to AUTOMATIC updates...)

  Please advice clearly, I'm not a tech genius!

  Hello
  • Who is the update that you are trying to install?

  You can use the following methods that can help you solve your problem:

  Method 1:

  I suggest to fix the .net framework functionality in Windows and then try to install the update.

  Steps to repair Microsoft .net Framework

  a. Click Start, and click Control Panel.

  b. navigate to the program and features.

  c. scroll down for Microsoft.Net Framework 4 Client Profile, do a right click.

  d. it will give you a choice of uninstall/change, click it.

  e. then it will give a choice to repair it, choose repair. It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  f. When finished, open Windows update and update again.

  Method 2:
  a. Click Start and type Services in the search bar and click on enter.
  b. go to the following Service and make sure the following boot parameters are enabled:

  • Remote procedure call (RPC) - automatic
  • Remote Procedure Call (RPC) Locator - Manual

  c. If you need to change one or two parameters, restart and check again to make sure that the two settings are still in effect.

  Method 3:

  If this isn't the case, perform the methods listed in the section below and check if that helps to install the updates successfully. http://support.Microsoft.com/kb/940520

• When installing updates for Vista I get the error code 80070490

  Whenever the automatic installation updated it gets error 80070490 and he falils to install all updates

  On what edition of Windows and what level of Service Pack, please?

  (1) you receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  "This problem can occur if there is corruption in component maintenance (EC) manifest."

  (a) run sfc/scannow from a command prompt
  http://support.Microsoft.com/kb/936212

  If the above does not resolve the error...

  (b) download, Saveand then run the update system (or CheckSUR) tool - http://support.microsoft.com/kb/947821

  (c) no joy? To resolve this problem, you can try to perform a repair of Windows Vista or Windows 7 installation
  http://blog.taragana.com/index.php/archive/how-to-do-a-repair-install-to-fix-Windows-7/

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the Service Packs and updates that are not included on the installation DVD.

  For Advanced users.

  (2) how to overcome error 0 x 80070490 when installing updates in Windows
  Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Expert MowGreen Windows IT Pro - consumer safety

• Error code 646 when installing updates KB2288953, KB2288621 and KB2291599

  I get the error code 646 when installing updates KB2288953, KB2288621 and KB2291599.  My Dungeon udates on default.

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• I start the download for my CS5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times

  I start the download for cs5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times

  Hello Tracy,.

  How exactly you are trying to download and install updates?

  Is it a mac or windows?

  Manually download CS5 CS5 download products

  Download the updates manually CS5 for Windows here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows

  Download the updates manually CS5 for Mac here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh

  Concerning

  Jitendra

• Error 0 x 80070005 when installing Windows Vista service pack.

  Cannot install service packs on vista ultimate. have tried since 3/2009

  Here is the accesscheck running of generated text

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  This problem may be caused by third-party security programs such as firewalls and antivirus software.

  "Please follow these instructions if you are experiencing this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads "

  My notes - TaurArian [MVP] 2005-2011 - Update Services

• Vista - error code: 80070424 & dt000 (cannot install updates)

  I turned on my computer this morning and shortly received the message that updates did not.  When I clicked on the message, above what was evidence.  I tried to do some troubleshooting on mine, without success.  I had received an error message telling me that an unauthorized change was made to Windows (which I did) and that I receive no updates on my license or activation of last week.  I went through the process to validate the system.  I went for the weekend, and this is what I came back.

  I come to you to ask for help.  I am running Windows Vista.  Any help would be appreciated.

  Hi cgccmt100,

  Is your system in normal boot mode?

  Sometimes, this error can be produced when the system is in selective startup mode. As such, I would like take you a look at this.

   

  Here's the Windows help articles that talk about the error codes that you provided. Please follow the advice given to resolve error codes.

  Windows Update error 80070424

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070424

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error C00D11B1 and 80040154 when playing videos in Media Player

  original title: Media Player

  These error messages appear when I try to play some video files. C00D11B1, original error message 80040154.

  Help?

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that you have found codes error C00D11B1 and 80040154 when playing videos in media player. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  2. What is the file format of some video files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Please follow the links below and check the issue:

  Download and install the fix to the link if you use Windows XP or Windows Vista Operating system below.

   

  Code error C00D11B1 when you play an MBR file or a live stream that contains more than 32 media streams in Windows Media Player on a computer that is running Windows XP or Windows Vista:

  http://support.Microsoft.com/kb/974905

   

   

  Follow the steps in the link for OS Windows XP below:

   

  Windows Media Player Error Message help:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5358.4827&ID=C00D11B1&ContextId=71&OriginalID=C00D0BB8

   

   

  Follow the links if you're using the Windows 7 operating system below:

   

  Open the troubleshooter in the Windows Media Player settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Open the troubleshooter in the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

   

   

  Windows Media Player C00D11B1:

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

   

   

  Failed to read the video portion of a media file when you use Windows Media Player 12 to play the media file in Windows 7 or in Windows Server 2008 R2:

  http://support.Microsoft.com/kb/981880

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.