Error 85 happening for digital channels 4-digit

Similar Questions

• Error rate scanning for digital USB MCC-7202 / Limitation

  Someone at - he heard or why there is a limit of 100 Hz on the digital input on this forum module?  I would like to be able to watch a digital signal of 1 Khz as a trigger for a system.  Thanks in advance!

  

  I check with the experts, but the message indicates that this device will use DIO who is pace software, no hardware to the rhythm.

  It doesn't look like this device has a hardware clock or e/s high-speed digital pads.

  Therefore, the best rate that you will see with DASYLab is 100 Hz, the use on PC synchronization.

  One option is to simply read the digital signal with an analog input. You may need to use the scale or module to trigger to force the values of voltage 0V and 5V, to match the low TTL and TTL high specifications.

• Media Center incorrectly determines the digital tuner on my Hauppauge 1850 as incompatible to the Canada for digital channels over-the-air via antennas

  I have a hauppauge tuner card 1850. I live in the Canada. If I've set up media center with the Canada as my position the digital tuner is not recognized as compatible in my area. If I place the library with my position defined in the United States. The digital tuner is recognized and works very well. The downside is that I can not guide ads for my actual surface when I set the location in media center in the United States.

  http://experts.Windows.com/w/experts_wiki/enable-ATSC-and-QAM-in-Canada-for-Windows-7-Media-Center.aspx
   
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/85193.aspx
   
  could help you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• "No valid source or target channels specified. Cannot run. "error when you try to convert to digital channel waveform

  I'm trying to convert a waveform channel in one digital channel and a channel of absolute time, but I get the "no valid source or target channels specified. Error cannot run. ».

  I'm trying to concatenate several files TDMS InsightCM so I can display the data in a continuous flow over time. If the first file loaded (one of the channels in the group "Signals") convert the same channel, it works fine, but when I try to do the same thing with any of the channels from the second file (one of the channels in the group "Waveforms1"), I get the error.

  

  Hi JEBalles,

  I was able to reproduce this behavior when I chose a digital channel as my channels to convert. In this case, it looks like you run the operation on the speed profile > Mod1-Ch0 A NL, which is a digital channel.

  Could you try to select a waveform another channel? It looks like [3] Mod1-Ch0 A NL is a waveform channel.

  Kind regards

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I click on my documents or my pictures etc nothing happens for a few minutes, then get an error report.

  My documents will not be open. When I click on my documents or my pictures etc nothing happens for a few minutes then get an error report. I tried in safe mode and the same thing happened. Any ideas how to fix this or get my picture back please?

  If it is a recent development, try to perform a system restore to a time before your problem.  You may need to run from the command line as described in the following article:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"

  <>http://support.Microsoft.com/kb/304449 >

  HTH,

  JW

• Library meets live TV with the error: "there are currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.

  Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.

  In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.

  My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.

  Suggestions have greatly accepted.

  I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.

  The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta

  Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.

  I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).

  Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.

• Whenever I try to update Acrobat XI 11.0.07 I get the error message: the update could not be applied because Adobe Application Manager is running. Please close Adobe Application Manager and look for updates again. This happened for months,

  Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »

  
  

  This happened for months and still fails in the same way.

  You can download Acrobat pro XI of the same link:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Numbers gives an error of syntax for all equations

  I don't know what is happening, but I keep getting errors in syntax for multiple equations and no matter where I put it or how, he always gives the syntax error. Example B2 has 500 in there. Enter B3 B2x2 and it gives an error of syntax instead of 1000.  I leave numbers and re-open the file with the same results. I even opened a new worksheet, and when you enter anything except the Scriptures, I always get the syntax error. It seems that there is something wrong with the numbers himself. Can someone explain why I can't use the formulas at all. They used to work in the past, so I am confused, what can happen.

  Salvation of,

  Did you B2x2 = or = B2 * 2?

  Number change * to x, but seems not to recognize x as the multiplication operator when he entered directly.

  Kind regards

  Barry

• Toshiba DVR80KF DVR is not able to keep registered digital channels

  Hello
  I'm not sure this is the right section but I try.
  I use the DVR in topic since January 2012 when I bought it.
  Now every day that the DVR is not able to keep registered digital channels.
  Now the automatic syntonization of digital channels. Everything is allright.
  Tomorrow, all channels are missing and I do the update again.

  You have any suggestions to fix the problem by myself or the DVR has to fix in a center of Toshiba?

  If so, is that I believe that this issue is covered by the warranty of the producer, isn't

  Thank you very much for yr help

  Hello

  I found a manual on this unit very:
  http://www.Toshiba-OM.NET/DVD/PDF/English/DVR80-English.PDF

  the 21 page provides information how to parse and store the channels.
  Check all the settings and follow the instructions.
  If no channel has been stored, the antenna confirmation will appear. Then you must press ENTER to start the auto scan new or press RETURN to cancel the initial settings.

  In other cases, I think that your problem could be related to hardware issue.

• Qosmio G20 154: not all digital channels under MCE

  Anyone know why under MCE not all digital channels are tuned, all using the Cyberlink Cinema Manager all channels are tuned regularly?
  Thank you

  Enzo-ita Skype

  Hello

  I found this Microsoft Knowledgebase document:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;555330

  I don't know if it will help you to solve the problem in Italy, but you can check it out.

  I also found this page that describes HDTV in Windows XP Media Center Edition 2005.
  It is said;
  To check online what digital TV channels are available in your area, go to AntennaWeb Titan TV. The two Web sites provide tools to identify what digital TV channels are available in your area for live broadcasts.

• PXI 2720: Conection for Multi channels

  Hello

  I put implement the multiple channels with resistance adjustment at the same time.

  It is good to use '2720 Soft Panel', but I couldn't find the way to set up on my own Labview program using 272 X reference live

  For example, I want to implement chan0 (80 ohm), (120ohm) chan1, chan3 (100ohm) etc.

  I tried on one channel at a time. This is to give the new unstable resistance...

  Is it possible to using X 272 screw reference?

  Should I use "palett Ni272x-> advanced-> ni272x relay control multipe" fuction for their implementation?

  Thank you

  Insuk

  Hello Insuk,

  The NOR-272 x Resistance.vi for example is a good example of how define a single channel - to set multiple channels, call the 1Chan resistance ni272x 1Samp.vi to write for each channel you want to adjust.

  Make sure you that you connect also each channel to the connector had TO plug into the front panel when you need to use it.

  Here is an excerpt that should define a multiple channel resistance and connect these strings to the façade had TO connector:

  

  Note: you can set the resistance without connecting to the connector HAD / DMM and then only connect to the connector HAD / DMM when necessary.  I noticed that the '272 x Soft Front Panel' does not display the resistance of the channel if its not connected to a connector - the code snippet above to display the correct resistance in 272 x Soft Front Panel, but will also each channel link to the front panel.  Make sure what you want to do this before starting the extract.

  Make sure that you aren't opening and closing of the session each time you call the resistance VI write, this could cause you reset the unit each time, which would be left to zero all the other channels.

  momo2013 wrote:

  I tried on one channel at a time. This is to give the new unstable resistance...

  I don't understand what you mean by «Who does give the new unstable resistance...» "If the code snippet above does not work, can you clarify on what is happening.

  -Marshall G

  National Instruments

• Comparing two digital channels or waveform

  Hello

  How to compare two digital channels or the y-axis of the same lengths waveform channels and find the line that has about the same value in the channels. For example, suppose we have two digital channels X and Y which has about the same value in line 15. I need to write a script to find out in which line the canals coincide.

  Kind regards

  X.Ignatius

  Hi X.Ignatius,

  I subtract channels and use the CHNFIND function to search for string values that are zero or nearly zero.

  Greetings

  Walter

• 10 data kech. / S for 28 channels

  Hi all

  On the ground, I have 28 channels of sensor data, the data rate is 10KS/S for each channel.

  I store the data field up to 3 months to create historical reports or analysis of the conditions on the ground.

  The data is very large, so I want to hear from you all to store as much data techinique or preferred way to store as much data.

  : mansurprised:

  Thanks for your suggestions.

  The requirements of the project are already set by the customer. The client wants to complete 10K to 28 channels. He cannot afford the minimum sample rate or data loss.

  I tried with the TDMS files to store 10 kech. / S (size SGL) given to 28 channels (sine wave); the size of the file is approximately 3.5 GB for 1 hour. The full-day data come around 84 GB, I'm not sure of the size of the TDMS file that can support up to as much of the file size, if it does not then support once again, I have to save the data to the full day in the whole of the bunch of TDMS files. Now if the customer wants to see the full data report 1 time in graphical format or in a table the task to perform the action takes around 2 to 3 minutes or some time it came up with an error like "not enough memory". If at the end of the day if the user wants to see the report full day how I can provide the report who have such huge data.

  I use the LocalSystem PXI RT with a hard drive. PXI have always given 7 days as a backup, or in case of failure of the connection with the server, the backup data is in PXI.

  So my question now even than the database or a file format I have to chosse store comprehensive data.

  If there is no techinque to compress data, please suggest me.

• Easy one - Show 6 entered a digital channel

  Hello

  I have a Setup with 3 LEDs which, within each of them is 2 led, so total I have 6 flashing LEDs. I got one of the sons of the signal 6, connected to my digital channel P0.6 on my DAQ 6351.
  I would just get these 6 signal showed separately on a chart.

  I tried a number of things, but none of them would show them separately - how can I retrieve my DAQ.mx digital input 6 signal?

  I have delete my project for these chart I tried to create an overview.

  Thanks in advance
  

  That makes no sense at all. You need 6 different lines to 6 different data acquisition channels.