Error after creating a LOV on EmployeesVO for DepartmentId attribute

Hi Experts ADF,

JDev version 11.1.1.7.0

I have an EmployeesVO. And I did the DepartmentId as a list of values, under UI tips that I have selected DepartmentName.

When execution of the module of the application when I change another value of LOV. The system hangs forever.

is this a bug of 11.1.1.7.0 version?

Please advice accordingly.

Thank you

Animesh

Hi Anne,.

I think you are wrong in your PB-primary and foreign key relationship, so that the erroneous association and links created by Jdeveloper while creating tables business components. Remove all associations and links. Remove all your application data model. And create LOV on departmentID.

Add from your application data model.

Thank you

Fouzia

Tags: Java

Similar Questions

Error after installation of Service Pack 1 for Windows 7

I use Windows 7 Ultimate and have just upgraded to win 7 SP1, but after installation, this error "AntiVir Scanner from the command line for Windows has stopped working" message whenever I open an application. These applications don't crash, but the forthcoming disorder with them is really annoying, and I don't know how to solve this problem, because I do not use AntiVirus software at the present time. So please help me. Thanks in advance much.

[IMG] http://i1226.photobucket.com/albums/ee410/bug_bunny145/Untitled_zps82267e02.jpg [IMG]

I thank very you much. At that time I used too many software use clean boot as a method to check if a program has been the source of this error, so I decided to reinstall Windows 7. I really appreciate your support. ^^

error after creating a console service on vSwitch1 for iSCSI

For iSCSI, I created vSwitch1 and put a NETWORK card and assigned IP address 10.1.1.1 and 10.1.1.2 default gateway on this (photo 0).
on iSCSI host 10.1.1.2. The two connenct directly.
VSwitch0 192.168.1.201, gateway 192.168.1.254 default with another NETWORK card
Click on property for vSwitch1-> add-> service console
put the IP address 10.1.1.1 and subnet
and not changed Service Console Default Gateway (photo 1)
Finally, get an error message (on photo 2) and the new Console of Service cannot be built.
So changed Console Default Gateway to 10.1.1.2 Service (photo 3), got an error message too

George,

You can have the same IP addresses on the Service Console and VMkernel port!

Network for software iSCSI Storage configuration describes how to configure iSCSI.

André

Error in creating the body of HTML for Email with attachment

I have an application where I send emails with an attachment. It seems to work very well. I'm now add content to the body of the Email and I'm running on about how set up the body. To test, I created a small amount of html code which is placed in part p_body_html of the script send mail, but because it's going to be a little (more than 1000 characters) to create the real html table, I'm trying to create in a declared variable and then have the p_body_html call the variable l_body_html and that's where I'm running into the following error message :

1 error has occurred
* ORA-06550: line 9, column 9: PLS-00307: too many statements of 'SEND' fits this call
ORA-06550: line 9, column 1: PL/SQL: statement ignored

Code that works is:

 
DECLARE
    l_id NUMBER;
    l_body_html CLOB;
BEGIN
l_id := APEX_MAIL.SEND(
        p_to        => :P4_TO,
        p_from      => '[email protected]',
        p_body      => 'Please review the attachment.',
        p_body_html => '<html><head></head><body><table width="615" border="0" align="center" cellpadding="0" cellspacing="0" RULES=NONE FRAME=BOX style="cellpadding:0 cellspacing:0"><tr><td height="32" colspan="2" bgcolor="#FF0000">Information</td></tr><tr><td colspan="2">Testing</td></tr><tr><td>One</td><td>Two</td></tr></table></body></html>',
        p_subj      => :P4_TITLE);
FOR c1 IN (SELECT filename, attachment, mimetype 
        FROM ATTACH_EMAIL
        WHERE recordid = :P4_recordid) LOOP

        APEX_MAIL.ADD_ATTACHMENT(
            p_mail_id    => l_id,
            p_attachment => c1.attachment,
            p_filename   => c1.filename,
            p_mime_type  => c1.mimetype);
        END LOOP;
    COMMIT;
END;

The code that does not work is:

DECLARE
    l_id NUMBER;
    l_body_html CLOB;

BEGIN
l_body_html :='<html><head></head><body><table width="615" border="0" align="center" cellpadding="0" cellspacing="0" RULES=NONE FRAME=BOX style="cellpadding:0 cellspacing:0"><tr><td height="32" colspan="2" bgcolor="#FF0000">Information</td></tr><tr><td colspan="2">Testing</td></tr><tr><td>One</td><td>Two</td></tr></table></body></html>';

l_id := APEX_MAIL.SEND(
        p_to        => :P4_TO,
        p_from      => '[email protected]',
        p_body      => 'Please review the attachment.',
        p_body_html => l_body_html,
        p_subj      => :P4_TITLE);
FOR c1 IN (SELECT filename, attachment, mimetype 
        FROM ATTACH_EMAIL
        WHERE recordid = :P4_recordid) LOOP

        APEX_MAIL.ADD_ATTACHMENT(
            p_mail_id    => l_id,
            p_attachment => c1.attachment,
            p_filename   => c1.filename,
            p_mime_type  => c1.mimetype);
        END LOOP;
    COMMIT;
END;

I said the l_body_html as CLOB then I fill it with code and then I reference it the p_body_html. I have this work under other forms of e-mail with no attachments and it works fine. Don't know how I have too many statements as the error States and would appreciate any help

Thank you
Wally

Hi Wally,

The SEND() function may take varchar2s or CLOB to p_body and p_html_body. In your code, you declare l_body_html as a CLOB, but assigning a string. It is possible that the database is confused?

Try to use TO_CLOB ('...') to set the value of l_body_html

Andy

Try to set up Time Machine, and I get this error; Keychain 100001 error while creating a system Keychain entry for the username "JGarrett" and the URL ' afp://JGarrett@JPG Capsule._afpovertcp._tcp.local./Data time airport.

Have cleared airport Time Capsule and factory reset after getting this message. Don't know where to go with it.

Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.

1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.

2. disconnect all external storage devices.

3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

6. triple - click anywhere in the line below to select this option:
```
chflags norestricted /V*/*/L*/Keyc*/*
```
Copy the selected text in the Clipboard by pressing Control-C key combination.

7. Quit Safari. You go back to the OS X Utilities screen.

In the menu bar, select

Utilities ▹ Terminal

Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

8. Select

▹ Restart 

in the menu bar.

9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

Select and copy this line as in step 6:
```
sudo xattr -c /L*/Keyc*/*
```
Launch the Terminal application integrated in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

Error after installation of the last DBWalker for unit 3.1.4

I renamed my dbwalker existing (ver 2.14) and installed the latest version of dbwalker for unity 3.1.4 (3.0 build 90) and put it in the same directory as the old version, then it would become part of "filing tools". I get an error every time I start the program dbwalker (if it is selecting from the list of the "diagnostic tools" or go directly to the folder and run DBWalker. The pop-up says:

"Error in the routine error: Automation FrmLoad.

The specified module could not be found.

I have to click on the OK button then a few times 'X' of the error, then DBWalker interface opens and appears normal. I have not run the utility, but because this forum works on a production system and I want to assure you that the initial error will not cause any problems. Any help would be appreciated.

There are some DLLs that register you when you install dbWalker - they are used for things like grids and localized text and others - they get listed in the registry and there is a path to point to them. My best guess is when you changed the path of the directory (as indicated previously - this is not necessary) these links in the registry were broken, so he was not able to load. It's just a guess, I have to try and repro myself to know for sure.

But short story - just install the new versions of the tools in their own directory and let them update filing of the tools themselves registry settings in order to avoid this sort of thing...

Error after using the registry work around for KB3072630

I have problems with an MSI installation. At first, I was getting a registry ddl error that I used the registry subkey entry 'RemappedElevatedProxiesPolicy = 1' work around. Now, the mistakes of process with service error 1719 Windows install could not be found (from the application). Logging of MSIEXEC product "Custom Server rejected Action - incorrect context", while the Windows Logs/Applications event: service error 1719 Windows install could not be accessed. Any ideas? It is on Win Server Ent. 2008 R2

I have problems with an MSI installation. At first, I was getting a registry ddl error that I used the registry subkey entry 'RemappedElevatedProxiesPolicy = 1' work around. Now, the mistakes of process with service error 1719 Windows install could not be found (from the application). Logging of MSIEXEC product "Custom Server rejected Action - incorrect context", while the Windows Logs/Applications event: service error 1719 Windows install could not be accessed. Any ideas? It is on Win Server. Ent 2008 R2

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Get the error when creating custom 11.1.2.3 planning attributes

Hello
I am trying to create a custom attribute to a sparse dimension in my classic planning application, but while the updating of the database, a 1060114 error occurs. How to solve this problem, please suggest.
Thank you

Here you go https://support.oracle.com/rs?type=doc&id=1408609.1)

Concerning

Celvin

The page you are trying to access is no solitary active error after open LOV
Hello

I have a grain of MessageLOVInput.

When I click on the flashlight icon, open a new window.

Here I select a value.

As and to measure the value comes in window LOV base page. I will carry out a VO query that gets the relevant lines for the tableBean.

Now if I do the button clicks on the page, or same window LOV will once again, I get the error

Value of window LOV, for any action after side server it gives the error page.

The page you are trying to access is no solitary active errors

Please help me in this.
vlsn,

Create an another VO with a different name and replace it with the name of the existing Instance of VO.

Kind regards
GYAN

Error 1019043 create a sketch for database Pool

Hello world
I tried to update an application in Hyperion Planning 11.1.1.3. When I launched it, the following error came
Error 1019043 create a sketch for database Pool
I seemed not to be launched; However, when I went to EAS, I found a reestructure running. I did only changes alias in rare dimensions so it should end quickly. Finally, I looked in the APP file and found an OTN and OTL my database files. I've been waiting for hours, but she is unsuccessful and my IND PAG files have not changed. What could I do?
Kind regards

Thanks Sreekumar,

In fact, I tried to stop the application, but as long as it was a reestructure I was unable to do. I tried to stop the services, but it was not possible either. Finally, I decided to restart my server it was a blocking process (I did not see the esssvr or treat) as long as the single file created was OTN.

After you restart the server, I rebooted services and then applications. Everything seemed normal, in environmental assessments are not the current process and I launched a new reestructure. It was fast as expected at the beginning and he finished properly. With this restructuring, the OTN file has disappeared and only my OTL remained as usual.

I checked the integrity of the data and metadata and everything is OK.

Kind regards

After effects 13.1.3 constantly give the error message is: "2 or more images for playback needs.

I After Effects 13.1.3 and I use a mac 2011 pro 17 "with 16 GB of ram, but I have a project I have I am not able to work because of After Effects not being not able to make more then an image at a time. When I go to the RAM preview it says "after effects error: Preview RAM 2 or more images for playback needs.» This phenomenon occurred as soon as I opened Adobe Premiere at the same time, but this is not the case and more. It is all the time. I can open a project, but after a little less than 3 minutes, he returned to make only an image. Purge memory doesn't do absolutely nothing, purge in fact anything actually the problem come immediately.
It's frustrating! I have deadlines to meet. Not to mention having to pay out of pocket for software that has not worked since Mac OS X 10.8. I wouldn't pay for the defective software.

I have version 13.2 and AE 2015, but without worrying about my problem remains. After working a project long enough after 15 minutes the system gives me just "needs 2 or more images for reading" ~ lets be honest, I don't think Adobe has any idea of what continues to resolve my problem and does not have to last year. I'm just done with them. I'm glad I'm not paying too much pocket, but as I pay after CS5 adobe became cheap made and sold at a great price. as said somewhere else...

"It is another recurring problem with AE CC and Yosemite, I fear there is no answer you'll love! Adobe should never say that AE was ready Yosemite because it obviously isn't. Just another example of the still decreasing faith of Adobe customer, and their ability to address the main issues timely.

Current major bugs:

Loss of import requesting reboot.

2 or more images RAM Preview error.

Skip first few of a RAM Preview frames.

Do not release RAM after leaving AE.

No good people Adobe pointing to articles they have written saying some of these things does not work! Just bloody fix then cease to release these buggy software! »

I experienced all of these problems. The only solution is to units of my operating system and install night of striped and as a filmmaker doing all the 6 months is unacceptable. It's a waste of my time and my money. Get Adobe together!

R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
This message is pop:
Microsoft Visual C++ Runtime library
Runtime error!
Program c:\windows\helppane.exe
R6034
A request made an attempt to load the wrong C runtime library
Please contact the support team of the application for more details
This message appears as soon as the machine restarts
Happens if I try to run Skype
There is no problems until the updates have been installed
This problem is urgent that this computer is used for a company
Thank you
David Schlachter

Hello

In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

Then uninstall and reinstall the software Skype and check.

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

New to OAF - oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for HeaderTableEO line

Hi I'm new to OFA. I am trying to create a master-details form based on the example given on Youtube (but using my own paintings).
I have already defined in table colums.
AM code is as follows:
Public Sub CreateEmailHdrRow()
{
xxVmmcSendEmailDefHdrVOImpl vo = getxxVmmcSendEmailDefHdrVO1();
String s = "Test";
Line = vo.createRow ();
If (!) VO.isPreparedForExecution ())
{
vo.setMaxFetchSize (0);
}
row.setAttribute ("EmailDefName", s);
row.setNewRowState (Row.STATUS_INITIALIZED);
}
When I run, the error occurs at the level of line (rank rank = vo.createRow ();)
Error message: oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for xxVmmcSendEmailDefHdrEO line.
Any help is appreciated.

Anjan,

Please check that the type of the CreatedBy attribute is a number representing the id in FND_USER and not the actual text of the name of the user. Standard Oracle columns that use a number for this value not varchar.

Kristofer Cruz

I am trying to download CS on my HP Z400 running Windows 7 for the first time. The installer won't boot. It finally gives a "server not available" error after 30-45 minutes

I am trying to download CS on my HP Z400 running Windows 7 for the first time. The installer won't boot. It finally gives a "server not available" error after 30 to 45 minutes. I checked to be sure there is no Adobe folder in my program files.

Hello

Please check the help below document:

Error download or update Adobe Creative Cloud applications

You can also view the nets below where the issue has been addressed:

Error 207 to "install Adobe".

Adobe creative cloud installation does not work. Get the error code 207. All solutions?

Kind regards

Sheena

get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions? Using Windows XP.

Hi James,
- Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
- Restart your computer.
- Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.
Let me know if the problem persists.

Kind regards

Nicos

Error after creating a LOV on EmployeesVO for DepartmentId attribute

Similar Questions

Error 1019043 create a sketch for database Pool

Maybe you are looking for