Error B200 M3

Similar Questions

• Error B200 on Canon MP620B printer

  I have a printer canon MP620B but I have error B200 on it cause I tried to plug it into a mac. If you could please tell me how to get rid of this error, it would be incredible! Thank you!

  Moved from feedback

  Original title: device

  Hi Gabriel,

  You can download the drivers on the Canon Web site.

  For assistance please contact Canon or Apple .

• my printer a Canon MX850 has an B200 error code my question what is the error?

  When I turn on my printer an error B200 comes up with the blinking light. What is the problem please?

  Try www.canon.com Support

• Wandering printing printing printer B200

  pixmamp560 comes up with code err on screen unplugged and reformulated

  Hello

  Please see:

  LCD - MP560 error messages

  who says:

  "Printer B200 error has occurred. Unplug the unit and contact the service center. »

  However, I found this thread

  http://forums.USA.Canon.com/T5/personal-printers/error-B200/TD-p/217

  Canon forums with a possible solution posted by a "product expert" Cannon

• Canon printer stopped working

  Original title: printer problem

  I have a Canon MP 560 model Copier, and suddenly, it no longer works.  Now it shows error B200.  I cleaned the print head and that did not work.  I need to replace the print head, or is there another solution that someone out there knows.

  Hello

  Please see:

  LCD - MP560 error messages

  who says:

  "Printer B200 error has occurred. Unplug the unit and contact the service center. »

  However, I found this thread

  http://forums.USA.Canon.com/T5/personal-printers/error-B200/TD-p/217

  Canon forums with a possible solution posted by a "product expert" Cannon

• Addition of Tesla M6 to Cisco B200 M4, error in vmware plugin

  I am trying to install my new M6 Tesla GPU card in my 6.0 ESXi host. I installed the software nvidia on the host and which seems ok. I can add the GPU card to my VMS in vcenter as well, BUT when I try to turn on the virtual machine, I get the following error:

  Not able to initialize plugin ' / usr/lib64/vmware/plugin/libnvidia-vgx.so' for vGPU 'grid_m6-8 q.

  I tried all the other GPU profiles and I get the same error for each GPU profile. I've updated my 6.0 to UP2 ESXi host and which don't seem to have any effect. I use the version of the driver host 352.83.

  I also checked the compatibility for this tesla M6 card list and my cisco M4 b200 is listed as compatible.

  For troubleshooting, I ran the following commands:

  [root@VH1:~] nvidia-smi

  Kills Apr 5 21:47:42 2016

  +------------------------------------------------------+

  | NVIDIA-SMI 352.83 driver version: 352.83 |

  |-------------------------------+----------------------+----------------------+

  | GPU name persistence-M | Bus - Id Disp.A | Volatile Uncorr. ECC |

  | Fan Temp Perf Pwr:Usage / Cap |         The memory usage | GPU-Util Compute M. |

  |===============================+======================+======================|

  |   Tesla 0 M6 on | Off 0000:81:00.0 |                    0 |

  | S/O 47 P8 16W / 100W |     30MiB / 7679MiB |      0% by default.

  +-------------------------------+----------------------+----------------------+

  +-----------------------------------------------------------------------------+

  | Process: GPU memory.

  |  The name of Type PID GPU use process |

  |=============================================================================|

  |  No common process found |

  +-----------------------------------------------------------------------------+

  Looks good to me?

  I also ran:

  [root@VH1:~] dmesg | grep-e "NVRM". NVIDIA.

  2016-04 - 04 T 17: 05:16.417Z cpu3:33421) loading module nvidia...

  2016-04 - 04 T 17: 05:16.423Z cpu3:33421) Elf: 1865: module a license NVIDIA nvidia

  NVRM: vmk_MemPoolCreate spent to 4194304 pages.

  NVRM: UNIX x86_64 Sun Feb 352.83 NVIDIA kernel Module loading 7 20:16:36 PST 2016

  2016-04 - 04 T 17: 05:16.754Z cpu3:33421) device: 191: registered driver "nvidia" of 20

  2016-04 - 04 T 17: 05:16.754Z cpu3:33421) Mod: 4943: nvidia initialization succeeded with module ID 20.

  2016-04 - 04 T 17: 05:16.754Z cpu3:33421) nvidia loaded successfully.

  2016-04 - 04 T 17: 05:17.553Z cpu29:33420) device: 326: find nvidia for device 0x36554304c6e6377b driver

  NVRM: nvidia_associate vmgfx0

  2016-04 - 04 T 17: 08:15.323Z cpu2:35277) IntrCookie: 1915: cookie 0x3d moduleID 20 < nvidia > exclusive, 0x1d flags

  Any other ideas on this?  Or anything else to try?

  Thanks in advance

  After some research, I figured this out.  Looks like the Tesla M6 and M60 Telsa get shipped in mode 'compute', which is not compatible with VMware or other hypervisors.  SO, you will need to download a gpumodeswitch utility, start the server with this utility and change the mode of the map to 'graphics '.  I hope this helps a few people running in this!  Check out the nvidia site for more information on their GPUmodeswitch utility.

• About discovery M1 B200 UCS blade - Bug found with 1.4(2b)

  Hello

  I m test some hardware UCS composed to interconnect two 6120xp and two chassis, each chassis have two blades One is B250 M1 in Slot 1 and 2 and the other are B200 M1 in Slot 3

  I was at one point running the B200 M1 blade in each chassis without any problem until the time came to test XenServer. After that I was done with the test I driving the service profile I believe before you turn off the blade.

  From there curiously service profile was unrelated, but I couldn't turn off the two B200 M1 blade, so I tried to reset the and I even had to reinstall the two blades. Once those two servers were never available, always on and cannot be turned off with the following status, when occurs a discovery

  Overall State would be ' discovery-a failed ' and the current task status details shows:

  "Configuration of the main fabric interconnection access to Server 2/3 (WSF-STADIUM: sam:dme:ComputeBladeDiscover:ConfigFeLocal).

  The WSF, I get the following:

  Result of remote Invocation: end-point-not available

  Remote Invocation error code: 1002

  Remote Invocation Description: port remote eth (2/1/2) is not created

  Any help is appreciated. I spend a lot of time trying to find something on the Cisco technical support site or forums without success.

  Thank you

  Maher

  I just open a TAC case on the same issue.  It is caused by a bug fixed in 1.43i - background process cause more queue MTS block. (CSCtq03411).

  Temporary workaround until you can update is to ssh in the interconnection and connect to the local-mgmt and deliver orders pmon stop and then start pmon.  This will cause an interruption of service.  No configuration change is possible until this is done.

• ISCSI Boot B200 M2 need, but get 'not enough available vNIC.

  Hello

  I'm trying to implement initialization iSCSI ESXi on a B200 M2 w / M71KR-Q card above.

  I add vNIC A and B (each linked to a fabric respectively), but trying to implement a vNIC iSCSI - I get the error «not enough vNIC» available

  Looking around, it seems that M71KR-Q only can support 2 vNIC (which I also confirmed by trying to add a third, same error message as above).

  I just thought that since the overlay of iSCSI vNIC real - it works.

  However, even when adding just 1 vNIC and trying to superimpose a vNIC top iSCSI - I get the "there not enough resources overall, not enough vNIC available" error message.

  Does anyone know if it is even possible to initializing iSCSI on B200-M2 w / M71KR-Q on?

  Thanks in advance!

  Petar

  Please refer to this document in the section documents iSCSI boot https://supportforums.cisco.com/docs/DOC-18756 it is very detailed, I tell myself.

  initializing iSCSI is only supported on CiscoVIC and Broadcom mezz cards. It is not supported on the M71KR-Q Qlogic Gen - 1 mezz.

  Dave

• Compatibility of controller for the B200 M3 Board

  Can someone check its compatibility with controller board for a B200 M3 server work us to the 2.1 (3d) version of the firmware and have just received new blades. They came to the same version of firmware, but the controller board is at version 13.0 while all other servers in the environment are to version 11.0.

  I get an error that the service profile cannot be filled by the Board of Directors-updated controller not supported...

  Thanks in advance.

  Maybe its related to

  https://supportforums.Cisco.com/discussion/12265636/Board-controller-not...

  Controller board can not low rating from 13 to 11.

  Can you please send the error message!

• B200 M4 SAN Boot with attached local disk

  Hello

  I have a B200 M4 blade want to do boot SAN in the storage Bay. The blade has a local disk. I need maintain disk local and would like to bypass for the start of SAN. When I set up a 'political Local Disk Configuration' using 'No Local Storage"as shown in the screenshot, and when I associate the blade with a service profile, got the error:"server does not meet the requirements of local drive of the service profile". I did some research and tried a BIOS policy that can disable the SAS RAID config, but it did not work, still getting the same error. See the screenshot of error and politics of BIOS. Advice to solve this problem?

  I use UCSM 2.2 (3f).

  Appreciate the pointers.

  Thank you

  Braven

  If you just want to bypass the drive during startup, just don't include in your startup strategy.

  No need to disable the onboard RAID controller.

  -Kenny

• B200-M4 Board controller activation failed

  I think that we have seen before.

  B200-M4, 2.2.3D.

  HFP 2.2.3d-> B200-M4 Board Controller Version 5.0

  B200-M4 comes factory with controller Board Version 9.0

  Applying this HFP fails (see attachments)

  I think it's because of the controller cannot be downgraded?

  Can someone please confirm? It's an ugly error message, which cannot be erased.

  Hello Walter.

  Yes you run in the B200 M4 Board controller. A link below is a detailed guide step by step on how to clear your work around and it may be.

  https://supportforums.Cisco.com/discussion/12714311/B200-M4-activation-f...

  It descends to the controller Council was not able to return to the version of the UCSM. There are several ways you can delete it based on HFP, including the ability to catalog, ignore the warning or the upgrade of the infrastructure.

  Let me know if the guide in the link is not correct and I cannot hope for any other question.

• Error UCSM Serive Profill [not enough vNIC, connection-investment, not enough global resources]

  Hi guys,.

  I work in Cisco, and we have a problem for a few days, so I thought it would be useful to ask here.

  We created the service with 3 vNIC profile and tried to associate it with a server [actually, we tried 4 different servers] and always, the error we get is:

  "not enough vNIC.

  connection-investment

  There's not enough global resources. "

  Once I realized the error code is F0327, but not always.

  I suspect it's something with the IO Module or do not know what?

  Please, can anyone help?

  Thanks in advance,

  Ron

  Hi guys,.

  I just wanted to post this for everyone else reference.

  Blade: B200 M1

  Adapter: Cisco UCS M71KR.-e.

  3 VNIC was applied. Two NICs FOR interconnection fabric A and b. interconnection 1 VNIC to the tissue that was a fail with the error "connection placement. This is due to the fact that this card is part of the series of Menlo, in which physical network adapters are mapped to left and right that they can't stand to not "allow failover. This is due to the hard Menlo being mapped to each fabric interconnect so that would mean a VNIC / VHBA by the interconnection fabric.

  Once this has been corrected this error disappeared and the association of service profile is complete.

  Kind regards

  Qiese Sa'di

• M4 F1237 error, have crossed the threshold of the sensor

  Hello

  After upgrade from my UCS Manager to, a minor has appeared on one of our b200 M4 blade servers (running 2.2 (5 c)) after the upgrade of the chassis and fabric interconnects to 2.2 (5 c).

  the full message is:

  LED displays error 1/6 server health. Reason: DDR4_P2_H1_ECC:Sensor threshold crossed.

  ID: 712960

  Type: hardware

  Cause: health-led-amber

  Code: F1237

  Everything there suggestions to resolve this error, because I tried to search the forums, documentation and Google search like crazy without success? I hope that this does not only mean that we have a bad memory stick. Also, I rebooted this Blade 2 x just to make sure it wasn't a transient error.

  Yahpri - Maxwell

  Hello

  It seems that you have a bad DIMM. I open a TAC case or have the DIMM replaced in order to clear this error.

  Let me know if you have any questions.

  -Wes

• VCE vblock, LSI_SCSI: Reset for device \Device\RaidPort0 ERROR in VM Windows Event logs

  Hello, I have been a problem for some time and I can't seem to understand this issue. Basically, the VM freezes but returns after 30 seconds.
  I found the problem was present on all data warehouses and even showed errors for for guests (san boot) boot sector. After changing the round robin at the fixed path on data warehouses to use a specific fiber channel switch LSI_SCSI errors were gone on all data warehouses, VM ect... everything worked normally.
  We have an installation program VCE vblock with UCS (blades), Nexus 5ks and VNX.

  So basically, we were troubleshooting paths FiberChannel beside the UCS to the VNX. We have changed ports on the VNX SP but side A was always bad / good B... Compared the configs of nexus for the two, identical configs/features beside the specificities as VSAN ect. Examined the configs for the UCS, but are fundamentally the same with Setup on the side B, but everything looked good. Nothing is defective.
  I noticed Tx errors on ports of module e/s and CRC errors on ports in the Nexus. Thought it might be a bad fiber so I replaced... The problem is always present. Any ideas? Thanks in advance!

  Data Center:
  UCS: 5108 Chassis, IO module 2104XP (2.2 (3g)), blades B200 M2, fabric 6120XP interconnections (5.2 (3) N2 (2.23 g))

  5.5 ESXi update 2

  2 nexus 5ks

  VNX 5500

  I found the culprit, SFP. The FPS that were used throughout the entire upward was incompatible and FUBAR would. Not match speeds, single mode when it should have been multi ect. Just all around the nightmare. It's on EVERYTHING from the VNX to IOM simply ridiculous. After completing the gutting of the SFP and the fiber, replacement and then delivered at the point of the chassis of the UCS everything was great. Honestly, I don't know how it worked at all with this configuration. Anyway, if you want something done you have to do it yourself.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2