Error: "cannot add clean access server."

Similar Questions

• Cannot install Clean Access Manager Server/Bundle (worm: HP Server 4.0)

  Hi all

  can someone help me with the following questions I encountered during the installation of own server access/Manager in

  HP Proliant DL 360 G5

  Type: SAS

  Controller: Controller HP Smart Array P400

  a. first question is if I can install the two Clean Access Server & Manager in a HP Server

  b. after the server starts on the CD, had break showing the command "being run/sbin / loader."

  When I checked it displays "Waiting for device to be stable 20 seconds."

  c.When I tried to only install the clean access server, after loading anaconda it says "no device valid only found o to create new file systems." Plese check your hardware for the problem.

  Waiting for your valuable response for the same

  Dietsch

  CASE and CAM comes as a built... cisco devices is not like a CUCM, Manager of calls where you download the software and put it on a customizable material by you... 3300 servers come on different features... Take a look at the data sheet:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5707/ps8418/ps6128/product_data_sheet0900aecd802da1b5.html

  3350 and 3390 devices support smart array E200i... and also SAS raid disk controllers...

  b. you must order at least 2 boxes/servers, one for ca and one for CAM... PAK keys/licenses are important here, because the image can be also downloaded EAC, even if you lose the CD... When you order the box, it comes with the basic settings... just for short, you need 1 CAM, 1 CASE, licenses for two then CD are common for SCS and CAM. It's just, you must select the functionlaity in the last step of the installation...

  I hope this helps... all the best...

  REDA

• vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.

  Hello

  We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V.

  Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWorkspace Client launch and are trying to connect, and then an error will be presented "Error cannot connect to the server. We do not understand all the time and it is random.

  Go it is addressed urgently as it's going to cause some major headaches with our users.

  Someone at - it ideas?

  Cool, thanks Dan.

  I'll find the case of Mike and send the info from there.

• ACS - the clean access server

  Hi guys,.

  I have a doubt about the own ACS and access server.

  The clean access server can do the job of the ACS?

  for example, act as a VMPS server, AAA server, or radius server.

  Thank you

  ACS is entirely different to serve own access. See the below url for more details

  http://www.Cisco.com/en/us/products/ps6128/products_qanda_item0900aecd803be813.shtml

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• Unable to delete the file, get the error 'cannot delete file access denied. "

  See the error will not remove the file:

  cannot delete file access is denied.

  Make sure that the disk is full or write-protected and that the file is not currently in use

  * original title - not delete the file show error *.

  Start in safe mode and try. If still no joy, try this tool.

  Unlocker File Remover
  http://www.emptyloop.com/Unlocker/

  Alternative download sites.

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

• Cannot add the Essbase server in the EAS of my system

  Hello
  I have the admin rights, but I'm not able to add the Essbase server in my EAS.
  I have connection EA using the Internet link and after that I have added the Essbase server, but even after adding and the updating of the Essbase server list, I am unable to see the Essbase Server
  When I do the similar steps in another system, it works.
  
  Can is it you guys please let me know what is the solution for this.

  You probably use JRE 1.6 instead of 1.5. I had the same problem and this fixed it.

  There was a post yesterday about it:

  Failed to save the Local PC outline

• Connected HP - Server errors / cannot add a device

  The new "HP" connected problems?  I migrated to the eprintcenter at this thought, that it would be better, but so far, I have not been able to add my printer that I wouldn't have to do anyway because everything was supposed to go and whenever I click on the 'Services' tab, I get a server error.  All this seems to be broken, or I'm not doing something good?  Help!

  Problem solved.  EU set up HP connected using a different e-mail account.  Apparently, one of my email accounts, he didn't like.  In any case, I used an email based on the web, set up a new account at SnapFish too and then reset my printer by disableing web services, then re-help.  Hope this helps others with this problem.

• iSCSI initiator error - cannot add target

  I am currently using a MD3000i in a test environment.

  The installation is very simple:

  The MD3000i is directly connected to a Windows Server 2003 (x 64 Enterprise edition).

  The management software is completely installed on this server. Only one controller is used to manage the PowerVault (partially managed)

  All default settings are used. I have configure the system according to the guide online "Board installation and configuring iSCSI" found on the installation CD.

  I get an error when configuring the Mirosoft iSCSI initiator. As soon as I try to add a port for iSCSI (iSCSI initiator properties panel-> discovery-> target portals tab), I get the following error message:

  "invalid sendtargets response text was detected.

  After accepting this error, the port is added to the list, but will not appear in the tab target, it is therefore impossible to connect to this port. The port of host iSCSI on the table and the address source on the server IP responds to ping without problem.

  At this point, I am only able to connect to the MD3000i with the out of band management and cannot access the storage in any way.

  Any help would be greatly appreciated

  Robert

  
  

• Cannot add vSphere ESX server in Cluster 4

  Good evening everyone

  I just finished installing 2 vSphere 4 Essential Edition more servers. Has finished installing vCenter and configured in the data center, I plugged the server vCenter ESX host and create a new cluster with HA features.

  When I drag one of the two ESX servers in the cluster, the progress bar stops at 84% and then I got the following error:

  Name_esx.domain HA configuration

  Can not complete the configuration of the Agent on the host. See the details of the task for more information. Another HA configuration error.

  System

  vCenter.Domain

  2009-10-21 22:13:09

  2009-10-21 22:13:09

  2009-10-21 22:27:18

  Assuming that I have a problem with the license I have everything configured in evaluation mode, but nothing.

  I don't understand where it may be the problem.

  Thanks in advance

  try to restart the management agents and try again.  In addition, if you have no virtual machine running on the host computer, add it to the cluster maintenance mode, then press exit maintenance mode once the host is in the cluster.

  > service vmware-vpxa restart

  ... also, what happens if you try "reconfigure for ha?

• FireFTP cannot add Yahoo hosting server certificate exception

  Hello

  Can anyone help me, how to get the right setting to access Yahoo hosting server via FireFTP.
  I used to get that way before (starting a forum thread) and worked: http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2514599
  Which is by adding the prefix https:// on ftp. ["Mywebsite"] .com:21

  I use Firefox version 39.0.3 btw.

  Thank you!

  I couldn't access it using FireFTP. Maybe it's because FireFTP does not support the FTPS.
  FireFTP is not part of the FTP client offered by Yahoo: https://help.yahoo.com/kb/yahoo-web-hosting/ftp-client-sln20423.html

  But now, I can access it using FIleZilla, adding ftpes: / / prefix on ftp. [Mywebsite] .com
  This is the link of reference to define: https://forum.filezilla-project.org/viewtopic.php?t=25975

  Nevertheless, thanks jscher2000 for trying to help!

• Error - cannot locate the DNS server of comments when try to use the Windows XP Edition computer remotely family assistance.

  Original title: cannot locate the comments of my windows xp home dns server.

  We have all two windows xp home, only difference, I can say is in the exception of firewall computers comments tab, there is no box remote assistance to check or uncheck.
  whenever we try I get it's message. Could not locate dns comments.
  something terribly simple became simply terrible.
  Thank you

  THANKS A LOT FOR YOUR CONTINUOUS SUPPORT. USING WINDOWS MESSENGER AND ACTIVATE THE REMOTE ASSISTANCE, AFTER FLUSHING DNS CACHE, WE HAD NO CONNECTION PROBLEM. ALTHOUGH STAY CONNECTED WAS A PROBLEM. NOW IDENTIFIED AS THE NETWORK ADAPTER ITSELF IS DEFECTIVE. I WAS ABLE TO SOLVE MOST OF THE QUESTIONS ON MY FATHER'S COMPUTER, IMPOSSIBLE WITHOUT YOUR TUTALIDGE. SO I HUMBLY GIVE THANKS TO PEOPLE LIKE YOU WHO UNSELFISSLY GIVE THEIR TIME. I AM OF COURSE SPENT ON CREDIT TO MY FATHER AND OTHERS SO THAT THEY TOO WILL SHARE THIS EXPERIENCE WITH OTHERS. AT THE PRESENT TIME, HE HAPPILY TALKS TO FRIENDS IN THE OLD COUNTRY IN THIS ONE. HIS 'SOCIAL' NETWORK ONCE MORE ALIVE WITH OLD FRIENDS. Thank you very much.
  RON

• Ricoh SP C240 connection error cannot add language monitor.

  Original title: Ricoh Aficio SP C240DN

  Hello

  We just bought a new Ricoh SP C240 DN and try to connect via a USB port to our Dell laptop runnig windows 7.  WE get an error message - failed to add the language monitor, GGEGLM language monitor (19).

  Any ideas on what to do?

  Thank you

  David

  Hello

  ·         Do you get the error message when you try to install the software for Ricoh SP C240 DN?

  ·         When exactly do you get this error message?

  Response with above information to better help you.

  If get the error message when you try to install the software for Ricoh SP C240 DN. You can communicate with the support of Ricoh SP C240 DN for assistance.

  http://www.Ricoh-Europe.com/support/index.aspx