Ricoh SP C240 connection error cannot add language monitor.

Similar Questions

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• Connected HP - Server errors / cannot add a device

  The new "HP" connected problems?  I migrated to the eprintcenter at this thought, that it would be better, but so far, I have not been able to add my printer that I wouldn't have to do anyway because everything was supposed to go and whenever I click on the 'Services' tab, I get a server error.  All this seems to be broken, or I'm not doing something good?  Help!

  Problem solved.  EU set up HP connected using a different e-mail account.  Apparently, one of my email accounts, he didn't like.  In any case, I used an email based on the web, set up a new account at SnapFish too and then reset my printer by disableing web services, then re-help.  Hope this helps others with this problem.

• iSCSI initiator error - cannot add target

  I am currently using a MD3000i in a test environment.

  The installation is very simple:

  The MD3000i is directly connected to a Windows Server 2003 (x 64 Enterprise edition).

  The management software is completely installed on this server. Only one controller is used to manage the PowerVault (partially managed)

  All default settings are used. I have configure the system according to the guide online "Board installation and configuring iSCSI" found on the installation CD.

  I get an error when configuring the Mirosoft iSCSI initiator. As soon as I try to add a port for iSCSI (iSCSI initiator properties panel-> discovery-> target portals tab), I get the following error message:

  "invalid sendtargets response text was detected.

  After accepting this error, the port is added to the list, but will not appear in the tab target, it is therefore impossible to connect to this port. The port of host iSCSI on the table and the address source on the server IP responds to ping without problem.

  At this point, I am only able to connect to the MD3000i with the out of band management and cannot access the storage in any way.

  Any help would be greatly appreciated

  Robert

  
  

• Error: "cannot add clean access server."

  I am trying to add a server, but I get the above error.

  The error log says "own supported has been reached maximum limit for access servers", but I have no server defined CASES.

  You get the license keys for each of your servers, and then manually add them to the Manager before attempting to add the servers. I had the same problem myself. It is not very intuitive.

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• I can't confirm my new pc as my trusted pc. I am told to confirm by connecting through my old reliable pc. Error: "you cannot add a reliable PC now."

  original title: cannot confirm reliable pc

  I can't confirm my new pc as my trusted pc. I am told to confirm by connecting through my old reliable pc. My old pc 'confidence' problem no longer exist. I can add also, not a new pc, "confidence". When I try, I get the following message is displayed:

  You cannot add a reliable PC now

  To add a reliable PC to your account, you must have installed Windows Live Essentials. Install Windows Live Essentials

  I have installed Windows Live Essentials.

  Thanks for all the solutions.

  I got the message from Windows Live Essentials do not installed when I didn't sign my Live ID in WLMail.

  You have a confirmed alternate email or SMS phone number address?

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Connection error: windows cannot load the locally stored profile

  original title: connection error

  Always get following message when trying to connect to my desktop PC

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If this problem persists, contact your network administrator.

  This looks like a corrupted profile.  Assuming that you can connect with a user with administrator privileges, do one of the following procedures to restore your profile in the shape.  If you are unable to connect, try to connect by using the built-in Administrator account (Ctrl-Alt-Delete struck twice on the login screen, enter the user: administrator, leave blank password unless you have changed at some point)

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >
  (works best if you connect with Safe Mode)

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

  PS: Alteration of the disc often accompanies this problem.  Don't forget to run a "chkdsk" operation after you recover.

• Cannot add a printer. Print spooler crashes. Error 0x000006be

  So, I spent several hours working on this problem and nothing seems to help.

  I have Windows Vista Ultimate SP1.  When I try to add a printer, properties of control server or anything else related to printing, I just got the error "windows cannot add a printer [or" server properties cannot be read "" "]." The local print spooler service is not running.  Please restart the spooler or restart the machine. »

  When I restart the spooler via administrative tools/services, or from the command prompt (it's supposed to be successful) attempt to add a printer again, I get the error message 'the operation cannot be completed (error 0x000006be)' and the spooler promptly crashes again.  This just started to happen suddenly, and no not because I tried to install some any printer.  If it helps, I've been using a Dell Photo Printer 720, but I used it in the past with the same system, OS and driver without problem.

  I searched for solutions in the world and so far have removed all traces of the system printer drivers in the case of a corrupted file crashes the spooler.

  So far, I have:
  1 deleted all of the printers that could be uninstalled from Add / Remove programs

  2 cleared out the Windows\system32\spool\drivers\w32x86 and Windows\system32\spool\printers\ folders

  3. suppression of the subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers and HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers registry keys

  4 deleted default subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key

  Is there something else I could do to fix this?  Is it possible that the spooler application itself has a problem?  Or have I missed something it's ruin?  Any help would be REALLY appreciated!

  Hello urrghhvista,

  Try this:

  1. click on Start> select Control Panel> in programs and features> select turn Windows features On or Off.

  2. click on sign + Print Services.

  3. Select LPD and LPR. You must remove the Internet printing Client. Restart your PC to ensure there is no error in the spooler service.

  4. try to reinstall your printer software/driver.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Error message "User profile Service is a not the user of the connection profile cannot be loaded" when you try to connect using the Administrator profile

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.

  See if the following can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do the system restore.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• error cannot connect to vworkspace broker for connections. Please contact your system administrator.

  Hello

  our current facility is the next version:

  vWorkspace Version 7.5.304.547 on Windows 2008R2 Standard.

  When a new user logs in via the HTTP link brokers, they see the web portal with the logon text boxes, but when they enter their credentials, they receive the following error message:

  error cannot connect to vworkspace broker for connections. Please contact your system administrator.

  existing users can connect without problems. We have verified that the user account is not locked.

  I checked the link, however, we have much farm.

  I restarted the connection brokers and checked the event logs without finding the problem.

  Good skills in Debug. I remember that the 8000 Char limit. Well, the good news is, we have fixed this bug 4 years ago! He has been vice Id 191744

  It was fixed from 7.6.

  If you have a support contract, you can switch to one of the newer versions and the problem is solved.

• vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.

  Hello

  We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V.

  Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWorkspace Client launch and are trying to connect, and then an error will be presented "Error cannot connect to the server. We do not understand all the time and it is random.

  Go it is addressed urgently as it's going to cause some major headaches with our users.

  Someone at - it ideas?

  Cool, thanks Dan.

  I'll find the case of Mike and send the info from there.