Error checksum weekly or almost

Similar Questions

• Error checksum R100

  I have 3 Toshiba Portege R100s running Windows XP SP1/SP2. They all suffer from a checksum on boot up error which of course disappears once you press F1 and end in the BIOS. Utility Tester memory from Toshiba has been run on each of them and all 3 of the laptop fell into the range of laptops that need repair under the Exchange program memory from Toshiba.

  While being repaired by Toshiba, 2 laptops had their replace RTC battery (either the battery has been replaced by an authorized Toshiba repair shop). Within 2 days after their return, all laptops still raised an error at startup control. Each laptop is running the latest BIOS, the same software, and I went through the list posted checksum errors troubleshooting of Toshiba.

  Anyone out there suffering from that? I have a laptop on the way just in case.

  [Edited by: admin 3 May 05 15:24]

  Hello

  I found a FAQ on checksum errors to the Toshiba Knowledgebase! Maybe it helps you a bit!

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&from=search_service_options&FID = TRO0000000acc

  Sammy

• Error checksum on Satellite A100

  I have a checksum problem when I start my laptop. What can I do?
  This is the Message:

  Intel Calistoga + ICH7-M mother card
  CPU = 1 processors detected, cores per processor = 2
  Genuine Intel CPU T2300 @ 1, 66 GHz
  1023 system Ram passed
  2048 cache SRAM past
  Occult system BIOS
  Video BIOS with a shadow
  Fixed disk 0: HTS541080G9SA00
  ATAPI CD-ROM: HL-DT-ST DVDRAM GMA - 4082N
  Initialized the mouse
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Hi Bruno.

  The error message indicates there is a problem with the BIOS of your laptop, maybe because the CMOS battery running or failed. Thus the system startup by using a default configuration.

  I suggest that you try to update your BIOS to the latest available in the download section of Toshiba and allow also your laptop to resist a few hours connected to AC power (but not under tension) in order to allow the battery CMOS fully recharge.

  If you still get the same problem after that, then it is likely that the CMOS battery should be replaced by your nearest ASP.

  Kind regards

• Apex 5 - error checksum dynamic Action

  Hi all

  I don't cease to Marvel and depress me on apex 5.

  I just had a problem with dynamic action on a page with the checksum protection enabled.

  I need to read a value from a PLSQL table and give it back to a form element.

  So I have a page of submit element in the d.a. (primary key of the table) to fetch the row of the table.

  When I run the page I get an error of checksum on the question.

  What I am doing wrong?

  Thanks in advance for your suggestions.

  Robi

  OK see this

  APEX 4.2.1 - error dynamic Action with SSP

• Bug: "Notification message content error checksum" on automatic connection caused EIB failed zone set to yes

  Hi all!

  We had the problem after upgrade to 5.0 APEX, we got an 'error in checksum message Notification content"instead of the login message failed when entering a wrong user name or password when you connect to our application. We could reproduce the problem on our own servers, apex.oracle.com and www.maxapex.com with application created under the APEX 4.2. After a while the search for the cause, I compared a sample application by a faulty filter and discovered that the automatic time zone setting (Modify Application Properties globalization) has been set to 'yes' instead of 'no' of the sample application. After changing the value 'no', after a connection failure error messages has worked very well. But I couldn't not to turn the defective application example be Auto setting of the time zone to "yes". So I guess it's a problem of upgrading legacy applications 5.0 and 5.0.1. Try https://apex.oracle.com/pls/apex/f?p=43399 and enter some users of nonsense / pw.

  Does anyone else have this problem?

  Kind regards

  Christian

  Hi Christian,

  Thanks for the research of this issue. I filed bug #21435330 for that matter. It is caused by escaping into the JavaScript code for the detection zone, which modifies the text of the notification and makes it so different from the original text that has been calculated for the checksum for.

  Kind regards

  Christian

• AEX 4.1: error checksum with apex_util.prepare_url and PUBLIC_BOOKMARK

  Hello
  
  I'm on APEX 4.1. Before 4.1 APEX, I was able to generate a link with apex_util.prepare_url and use it as a public link with parameters in the url and a checksum to avoid that the values of the parameters are updated by users.
  With APEX 4.1, I have the following error:
  "No amount of control has been provided to show the treatment for a page that requires a checksum when one or more application, clear the cache or argument values are passed as parameters."
  
  My page has authentication value "Page is public" and value «Arguments must have Checksum» Page Access Protection
  Fields of text on the page have the Protection of the State from Session value "Required Checksum - Level Application".
  To generate the link I use the code:
  () apex_util.prepare_url
  p_url = > ' f? p = 33926:2:P2_I, P2_C:123, 456',
  p_checksum_type = > 'PUBLIC_BOOKMARK')
  
  I created test on apex.oracle.com pages to display the error message.
  1 page the link generated by the prepare_url function.
  Simply copy and paste this link in the browser to access the page (Page 2) which must show the fields with the values passed in the url.
  
  workspace: sdo1974
  username: [email protected]
  password: sdo1974
  
  Thanks for your help
  
  SEB

  Hi Seb,

  hit you bug # 12931249 described in the list of issues known to the http://www.oracle.com/technetwork/developer-tools/apex/application-express/41-known-issues-485406.html
  The good news is that a single patch is available to fix this bug.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• For these last days, I received the error notice following on almost every page I opened: error: the operation is not secure. How can I stop this?

  This error notification keeps popping up and I have to delete it in order to use my computer.on some pages, he can jump on 5 or 6 times or more the page opens / I never had this problem before. I am running Windows XP.

  Please tell me how to prevent it.

  Thank you

  Could it be caused by an add-on? You might want to try the Mode without failure of Firefox. It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules (Plugins like Flash will still work)

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• LaserJet CP1525: Laserjet CP1525 generates errors 'paper jam' on almost everything I print and there are no jams

  Hello everyone, I have a Laserjet CP1525 who I am troubleshooting for a colleague, and no matter what we do whenever we try to print, we get "paper jam in tray 2" "clear jam and then press {OK}."

  I checked this printer up and down and everything autour and there is no jams, there is not a coward or a sheet of paper, the platters, and linings are very clean, I opened all the doors on the printer, but we still have this isse. Toners are all fine, black, it becomes weak, but it is quite the impression that I was able to print a single test page.  I don't know what else to do. Any help is greatly appreciated.

  Thank you!

  How old is this printer.  How it was used.  On this engine, I saw a lot where the roller is worn and it won't pick up the paper.  The roll is kind of a pain to change, but on what I laid out with this issue, once I have change the roll everything works fine.  Remove the tray paper and printing tilt up and with a flashlight he will shine on the roll.  Do not touch the roller.  There should be steps on the roll that you can see.  Most of the time there are only steps on the outside or the inside only and the rest of the roll is smooth.  If this is the case, you will need to change the roll.

• .dmg for CS 6 file does not not for mac [checksum error]

  I received the download link after purchase student cs6 edition. Three links have been received - InDesignFamily_8_Content_ALL.dmg, Illustrator_16_Content_LS16.dmg and DesignStandard_CS6_LS16.dmg. download and double click on the .dmg for InDesign file it gives error checksum, the other two links give two folders that do not have any executable file. I'm unable to install even if I bought the suite 3 days back.

  DR. BELLE

  Whenever mount you dmg file to start the installation of Mac OS process check the checksum to verify this disk Image file is good to go.

  Optionally, you can also skip verification of checksum, but it is not recommended because it could lead to a malfunction of applications after the installation process.

  Please check once the size of the file is exactly as mentioned on the Adobe Web site.

  Download Creative Suite 6 applications

  Let us know, if the file size is correct. IE 3.5 GB

• Checksum error on submit

  Here is the text of the error:
  
  Error checksum for hidden and protected item ID (12429212017612507), value (22-SEP-11), posted total control expected (*), index_i (41), index_j (7), checksum (89DD19305B6FD7CD84217CF025A7CE76), index_m (7);
  
  '22 - SEPT. - 11' indicates that the page element that is P63_enterdate. It is a database column field. I created another page item, P63_THISDATE, I fill it with a SQL (select sysdate to double). I then poplulate the P63_ENTERDATE post with a javascript as follows:
  
  var vthisdate = ($v ("P63_THISDATE"))
  + $s ("P63_ENTERDATE", vthisdate) +.
  
  I changed the type of hidden in the text field, but the error persists. The page previously submitted without problem, but suddenly and without modification of the page, she has stopped working and showed this error message.
  
  Your thoughts?

  Hi Doug,.

  The APEX 4 on hidden object new field is called 'protected value' and by default it is set to yes. You can try this Setup, or none. This cannot help as you said you did this a text field but its probably worth a try.

  Thank you

  Paul

• Invalid checksum errors session Protection see the checksum State valid

  Hello
  
  I Review Session Sate logic to make me do my safer applications.
  
  I've created a simple report / a pair that allows me to open an item for edditing.
  
  I put the Application to the Protection of the State of Session "Enabled" and and my form page on Page logical access 'Arguments must have Checksum.
  
  My home page, I click on the icon for editing a line and get the page editor with the url:
  f? p = 126:3:7115846938209895:P3_WORK_PACKAGE_ID:1179 & cs = 3CC0C97D3A8B114D2E40EDF158C0AECFB
  
  If I then manually manipulate the url to change my P3_WORK_PACKAGE_ID from 1179 to 1180 to:
  f? p = 126:3:7115846938209895:P3_WORK_PACKAGE_ID:1180 & cs = 3CC0C97D3A8B114D2E40EDF158C0AECFB
  I get an error of:
  Error checksum calculated on demand, clear the cache, argument names and values of the argument (P3_WORK_PACKAGE_ID1180 [01BE394775DB7B5A861BEA77B6637A46]) does not match the checksum passed to the procedure of show (CC0C97D3A8B114D2E40EDF158C0AECFB).
  
  All well and good, but it tells me what should be the checksum. I can now update the url to use the checksum shown to make the url:
  f? p = 126:3:7115846938209895:P3_WORK_PACKAGE_ID:1180 & cs = 301BE394775DB7B5A861BEA77B6637A46
  the form opens for P3_WORK_PACKAGE_ID 1180.
  
  How can I stop the error message saying my way around the security of checksum?
  
  Thank you
  Martin

  I'm not sure but maybe this detailed message is coming if you're connected at the Apex and otherwise, it's show error message with no checksum more general?

• couldn't update for windows XP / IE Script errors

  My OS is XP Professional 2003 and there has never been an automatic priority update Windows do not install so far. The update is KB981793. I looked and it is essentially an update of time thingy for the computer, however, since the first failure to load it keeps loading in my bar, next to my clock and tells me that the updates are ready for my computer and it is constantly the same one that fails. So no matter how many times I try to install it, 5 min later, he's back and I cannot make install or get out. My computer has all the current updates and SP3 is installed.

  My second problem now, I hope that when you know what you are doing, is a simple explanation and fix. I'm getting now constantly an "IE Script error" on virtually every Web page I'm opening.  A few pages that I must accept the run script 2 to 10 times button to clear all the Script error pop up that took place on this page. I do not understand what a script error is actually or where it is produced or, more importantly, how messed up he tells me my computer or a program is. 6 months ago I maybe got 1 or 2 errors per week, in the last days 4-6, it is multiplied by experience of script. The current pop-up reads "an error has occurred in the script on this page." Then he asks "do you want to continue running the script on this page? Yes or no, and of course you say yes, so you can continue then within 5-10 seconds later, a small pop up in the corner said "IE has encountered a problem and needs to close", then he said "this tab has been recovered. A problem with this webpage caused IE to close and reopen the tab. "That is usually held twice in a row. Then you're almost through with Internet Explorer running and you will need to re launch.  Can you give me pls advise on what I should do. TYVM

  A1. See the section "Updates since the previous cumulative Windows time zone update" on this page:http://support.microsoft.com/kb/981793

  If you do NOT live in one of these zones, you can hide this update optional, not security.

  A2. You will find support for IE in this forum: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads

  That being said...

  IE tools | Internet Options | Advanced | Disable the debug script)<=check nable="" this="" option);="" display="" a="" notification="" about="" every="" script="" error=""><=uncheck isable="" this="" option)="" |="" ok="" your="" way="">

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why do I get JavaScript errors?

  I get this JS error when changing pages (almost all page) and it does not matter if FB is open or not: evalInSandbox:Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  It is followed by another JS error: error: permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  What is going on?

  Hi idowning

  It's quite possible.

  Have you tried to disable this extension?

• Error message occurs every time on the Satellite A100 XP

  Hi all

  Just a quick question hopefull.
  I get an error message; It happens almost everytime I start any program.
  The message is... + 'no drive found error c0000013 parameters 75b6bf7c 75b6bf7c 75b6bf7c "+.

  I use the A100 with XP o/s.
  There were no recently installed programs even if there was a recent update of Windows installed.
  Any help will be most appreciated.

  Thanks in advance!

  Hello

  It seems that some of your installed applications need a disc inserted correctly running.

  Are you using the original applications (no copy) and you have installed it correctly?

  By the way;
  I've goggled a bit and someone suggested to disable autorun on your CD-ROM drive.
  This solves this problem.

  Check it out and post your results!

  Good luck

• Satellite M40-129 Harddrive Bluescreen Error

  Hello
  I got a M40-129 last year, created 2 Partitions and installed XP Pro SP2. Everything worked very well, but a few months I drive hard-error-Bluescreens. When I run Chkdsk afterwards, I get messages about bad securities Index or orphan data segments (translated from German). Normally I reinstall my laptop then go to a backup Image and all is well again. But these errors occurring weekly/daily now.

  I called the support, but I was told that the support would be only grab the laptop and see if the problem still occurs. But that's what I'm already doing. Is it possible to fix this?

  Best regards
  Spoony

  P.S Partition Magic shows my a score of 88 Type which is big 204 MB. Any idea what this score is used?

  Hello

  First something about your partition hidden.
  The M40-129 Sat was delivered with the Media Express Player.
  This player is pre-installed on the hidden partition.

  Well, HARD disk system errors and the file can result from a variety of problems, such as hardware failures, outages of electricity, poor system maintenance, virus and human error.

  When you run Chkdsk with parameters, such as / f / / r, Chkdsk repair errors related to file system structures.

  I recommend the Microsoft information page. Here, you will find many useful information about HARD drive failure and why this happens.
  http://www.Microsoft.com/technet/prodtechnol/winxppro/reskit/c28621675.mspx

  Good luck