Error checksum on Satellite A100

Similar Questions

• Config error free on Satellite A100

  Dear Toshiba support,
  I use a laptop Satellite A100-036 of Satellite, when I start my laptop it shows the following error
  Not found
  c:\programFiles\TOSHIBA\ConfigFree\MUI\ENG\NDSNLS. INI
  Please help me to solve this error. I tried to download freeconfig tool site, but it doesn't help me solve the problem, please sat down me for this problem

  Thanks and greetings
  M.Sheik Nhut
  [email protected]

  Hello

  It seems the OS attempts to load the file Config-free, which does not exist or the path to this file is wrong.
  Both are possible!

  How have you tried to reinstall the ConfigFree! In my opinion you should first try to remove the old Configfree system, then after new reboot, you should try to reinstall the downloaded new utility.

  Good luck

  By the way; Do not forget that you have downloaded the Configfree for the right laptop series

• Error recovery on Satellite A100

  Hello people!

  Well, I've had my Toshiba Satellite A100 for almost 1 year, and I have these non-removable spyware and ad-aware. But besides that, I want to reformat my pc but I can't. When I choose for the boot device cd-rom drive, loading RAMDisk image, it comes up with an instant message and then he disappears, but I noted to see F6 and so I rebooted the DVD again and I spammed F6. And this is what happens:

  "Setup could not determine the type of computer you have, or you have chosen to manually specify the type of computer.
  Select the type from the following list, or select "other" If you have a device support disk provided by the manufacturer of your computer.

  ACPI Multiprocessor PC
  ACPI Uniprocessor PC
  Advanced Configuration and power interface (ACPI) PC
  NPS Uniprocessor PC
  NPS Multiprocessor PC
  Standard PC
  Others. "

  I thought, if I use the mechanical system or something else, can I just reformat with that entirely and then I use the toshiba recovery cd and I think I have the windows xp cd. Can I install windows xp from there and then go down all of the toshiba utilities download site and install them? Or does install the drivers to display with the recovery cd or I see nothing and I will stuff my pc up to? Lol usually whenever I have try sumfin to help my pc I usually have the wreck it. So I've always guaranteed, so I might even go back to there. But I would appreciate if you guys can help.

  Thank you

  Adam

  Hello Adam

  Honestly, your ad is so complicated and confusing for me I will just try to explain how you can install OS on your Satellite A100.

  If you want to install the operating system, you can do on two tracks:
  -Sent using recovery DVD set in ODD and turn off. Turn it back on and immediately press the C button. keep it down for a short period and the ODD is obliged first to start device. When the facility starts just follow the on-screen menu.
  -You can use the Microsoft facilities (full version) CD. Install the OS and after that you need to install all the drivers, tools and utilities manually. All the stuff you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com support & downloads

  Before you format drive HARD trying to create own Tools & Utilities CD. This option you will find Toshiba Assist Protect & Fix tab.

  All that s! If I misunderstood something please post again.

• Blue screen error on the Satellite A100 - 920 (PSAA9)

  Hello

  I got a blue screen error during use normal and after reboot, Windows suggested updated the BIOS, so I've updated with the latest version (5.10). The next day, I got another blue screen and reboot, Windows has suggested that I update my display drivers, I did (to Ver. 8.241)... I have an ATI Radeon X 1400 GPUS. After that, the computer crashed every time that it loaded windows, with a popup on services.exe telling me the computer shuts off in 60 seconds.

  I assumed that this was linked to the display driver, so I replaced the drivers with a version earlier than day (8.241 - 034065C). Once I did, it seemed to work and I could use the computer very well for a bit, even play games like GTA, but I'm starting to take again the blue screens, usually just at the opening of the files, etc. and not when you run graphical applications with a lot. The problem disappeared when I turn off my display drivers, but which is not really a solution.
  I disabled the reboot on the parameter of the error and it is information of the blue screen of death:
  STOP: 0X0000008E (0XC0000005, 0XEE6DF5E9, 0XBAD2F99C, 0X00000000)
  System32:huy32.sys - address EE6DF5E9 base at EE6DD000, Datestamp 45abe717

  Anyone have an idea how I can solve this problem, it makes me crazy!
  I downloaded the map Omega drivers, but am slow to install that I heard that they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without having to use third-party drivers myself.

  Hello

  One question: do you use Antivirus applications and you did update the Windows operating system?
  You said something about services.exe you indicating the computer turns off in 60 seconds.

  For me, this looks like a virus! I also google for system32:huy32.sys some people said it s a malware!
  I m not 100% sure, but maybe you have some virus you OS!

  Now to the question of pilot you: Yes, Toshiba recommend that you use a clean graphics drivers on the Toshiba site. The use of original graphics drivers on the Web site of graphics card manufacturer is not recommended.
  But I read a lot of thread on the omega drivers and many users using the drivers and they have no problems.

• Satellite A100 BIOS update - BAD CHECKSUM

  I've just updated my BIOS to version 6.0 that TOSHIBA said > 26/11/07 "this Bios update adds functionality to your system: Satellite A100 Toshiba 6, 00 - WIN (PSAAN).»

  My original BIOS was 5.9
  My computer works fine A100-33 but when my computer restarts, showed it to the BLACK screen.

  I noticed that it displays BAD CHECKSUM and suugested I select default BIOS but I * ignored this advice * that wanted this new Version of the BIOS.

  What means BAD CHECKSUM and what effects will have on my computer peformance please if any?

  Under the system information that is displayed for my BIOS Version/Date Phoenix Technologies LTD 6.00, 07/12/2007

  Name of the Microsoft OS? ® Windows Vista Home Basic

  Hello

  Don t worry if the message "bad checksum" will appear only once.

  'Bad checksum' means that the BIOS has been changed, rewritten or settings have been restored by default. Thus, whenever you save your bios settings, bios made a "checksum" to check the next time you start the settings were stored and all goes well. If something is wrong or has been changed, then the checksum stored since the last save a Don t match real new generated checksum.

  So if you make an update of the bios, all your settings will be modified logic - you get an error "Bad Checksum".

  Another reason for such "Bad Checksum" is an empty BIOS stack or a malfunction, so BIOS cannot keep it s settings and you will get every time you start the computer a message "Bad Checksum".

  Welcome them

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Satellite A100-413: Error Message - ID MESSAGE NOTINSTALLTVALZ ERR

  Hello

  I just installed Windows Vista on my laptop. I downloaded the value added package and tried to install the 6 option buttons.
  However, I always get the error message "ID_ERR_NOTINSTALLTVALZ_MESSAGE". I also tried to install any options button and the 2 button. For all three, I get a few messages.

  I have the Satellite A100-413.

  Hope someone can help me.
  Kind regards
  Mark

  This error is known to me;
  It s very simple solution.
  You must update the BIOS to get rid of this error message.

  Please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24642&MessageID=90468
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256

  Good luck

• Satellite A100 Recovery CD Wizard Error Code: F3-FFFF-0008

  I just bring a Satellite A100 and a problem by performing a full restore using the two supplied with my laptop recovery disks.

  The problem came after I deleted all partitions on the hard drive and then reformatted the entire hard drive.

  I get on the above error code, stated in the following format:

  ERROR: F3-FFFF-0008
  An error has occurred
  Please press [OK] to turn on the power the computer off.

  When I try to use the Recovery Wizard.

  I will be grateful if someone can help me on this one.

  I agree with the previous user. I think it's a matter of formatting of s.
  Try to boot from the original Windows XP CD. This would format the HARD drive again.
  Then use the Toshiba Recovery CD again!

  I noticed these problems installing several times and bad HARD drive format has been mostly a reason for similar problems

• Satellite A100 - unrecoverable system error and restart

  Without warning my Satellite A100 don't close but reboot, I removed the auto reboot, and the error that is displayed in the BSOD is:

  STOP: c000021a {fatal system error}
  The Windows Logon Process system process ended unexpectedly with status 0xc0000000 (0x00000000 0 x 0000000)

  in the event where Viewer does not appear anything on the error, I tried a system restore but it cannot exercise, in the event viewer this time it is written that he cannot run because the PC is not turned off regularly,
  How can I do?
  The BSOD appear in the last stop after the color screen when turned on the black screen just before the
  Turn off the power.

  your
  Fabio

  Hi flottero,

  It of always a little difficult to discuss these blue screens because many things could be the reason, but in most cases it s a hardware or driver problem.

  If system restore doesn't work, can you try to restore Windows recovery disk settings, please? After that, you get back factory settings and so you can identify a hardware problem or software.

  Check this box!

• On Satellite A100 DVD drive is not accessible - i/o device error

  I have a Satellite A100 - 01 G, but the CD/DVD drive is not accessible when I try to open the files on a disc. When I try to run a disc I ge "the request cannot be performed an i/o device error.
  When I click on the drive icon it says that the application is not found.

  Help, please.
  Thank you

  Hello

  Have you tried to update the CD/DVD drive?
  You could go to the Device Manager and could remove the reader of CD/DVD from the list of devices.
  Then, you must restart the laptop.
  After restarting again the Windows operating system will recognize the new device as the CD/DVD drive and will initialize and reinstall the driver.

  Then try using the new CD/DVD drive

• Satellite A100-496: drive CD/DVD - incorrect function error

  Hello
  I am using Toshiba * Satellite A100-496 * laptop with Windows XP as operating system.
  When you use the CD player, I get the following error: -.

  * D:\ is not accessible *.
  * Incorrect function *.

  Can someone guide me to troubleshoot and identify a possible solution?

  Hello

  Go to the Device Manager and remove the drive from CD/DVD to the list.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the machine.

  I m not very well if this will help, but in many cases this work around was very helpful

• Satellite A100: Norton error appears - memory could not be read

  0 x 02459962 referred memory 0x5902adf8 memory can not be read.

  This error keeps showing upwards.
  Can anyone help? He came to norton when I do a check up.
  Also, I get an error when I close internet explore tells me msvcr.80.dll is not found.

  Aside from that my laptop works ok, it is a satellite A100.

  Hello

  I think that this file msvcr.80.dll is part of the .NET Framework 2.0.
  I would try to install the version or see if you can do a repair on it via Add/Remove software.

  I studied and declined to find out why the error of Norton.
  But the address of memory does not help.
  However, it seems that you have installed something that might be a bad influence.

  Maybe a switching of the BONE at the beginning good point work would clear this issue.

• Satellite A100-692: after an error of installation of Windows XP Prof blue

  Hello

  I bought a new satellite A100-692 with Windows XP Home OEM as an operating system.
  But when I tried to access the internet using the local area network and a Proxy Server, it does not work.

  I tried everything I knew and even ask some Forums to get a response, but nothing help.
  Then I think it can work when I install Windows XP Prof instead of the OEM Version. Because all Clients in our network work fine with it.

  But when I run the Installer (booting from CD) I get a blue screen with the message that there is a problem with the PCI (pci.sys) driver (after loading all the drivers).

  Can someone tell what I need to do so that I can install another OS?

  Thank you

  PS: Excuse me if my English is not very good ;)

  Hello

  First of all, the blue screen error message may appear due to hardware failure or serious malfunction of software.
  In your case I guess that it s a software issue because on the version OEM pre-installed, everything worked properly.

  In addition I checked the site s driver and it seems that there are drivers for 3 different notebooks to A100. In this case, you should be sure that you use the correct drivers.
  As far as I checked this laptop your A100-692 has PSAA9E number.

  But have you created a CD of drivers & tools before formatting the HARD drive? This option you will find in the assistance of Toshiba.

  However, you can download the drivers from the Toshiba site and here it is very important that these drivers will be installed in the right order!
  The chipset utility must be installed in a first time after all installations of service packs.
  The common modules are also important.

• Satellite A100: I am not able to use the keys FN - common module error

  HY,

  I have a toshiba satellite A100 series and I have a problem:
  I'm not able to use the fn functions (for example fn + f9 to turn off the touchpad or fn + f3 to the eve and so on...) and I got an error concerning "common module.

  A dialog box told me that the common module is closed...
  Someone knows this problem?

  I'm sorry for English...

  Thank you

  Hello

  I put t know why this error message and why the common modules stopped working, but to my knowledge, the common modules are needed to run and use the FN keys for example.

  So here is my advice;
  Go to Toshiba's European diver page, choose the common law modules, download, unzip, and reinstall it again!

  After restarting again the FN keys should work again.

  Best regards and good luck

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.