error code 080007005 system restore

Similar Questions

• Error: an unspecified error occurred during system restore

  Original title: System Restore

  After trying to restore my system, I get the message: an unspecified error occurred during system restore. I have a Wen at 3 different points with no result. Is there a solution?

  Thanks in advance
  Ronny

  Hi Ronny,.

  1. you receive the error with the error codes?

  2. did you of recent changes on the system?

  Step 1:

  You can temporarily disable third-party security software and firewalls installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Step 2:

  You can also scan [SFC] System File Checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 3:

  Alternatively, you can try to boot in safe mode and see if you can perform a restore of the system in safe mode.

  For more information, you can consult the following articles.

  Start your computer in safe mode

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Windows Vista - unexpected error occurred during system restore

  original title: an unexpected error occurred during system restore, did not finish no codes.__vista Home Basic error

  HELP PLEASE. THANK YOU, RICK

  Some security programs prevent changes to their file and must be configured to allow the restoration of the system work.  For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore. See the documentation of your security program. Boulder computer Maven
  Most Microsoft Valuable Professional

• Unspecified error occurred during System Restore.Running Vista Home Basic 32 bit

  After running system restore and restart my computer, I get the message "unspecified error occurred during system restore. I'm running Vista Home Basic

  32-bit. someone at - it a response? I have no idea what to do next.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• I run Vista system restore; Msg says could not complete - "an unspecified error occurred during system restore.

  I tried to run the various restore points system restore.  Whenever the result is the same: msg says could not complete - "an unspecified error occurred during system restore.

  Try again in Safe Mode.

  What you are running for an anti-virus? If it's anything other than Microsoft Security Essentials, you may need to temporarily disable.

  If this does not work, you can run it in Mode safe mode with command prompt. Once the command window appears. type %systemroot%\system32\rstrui.exe and press ENTER. The system restore GUI will go up, and you can restore to the date / time selected, or select a time different everything such as running Windows.

  SC Tom

• Blackberry updates & "unspecified error occurred during system restore.

  After installing updates to Blackberry, Blackberry sync would not work.  Tried restoring the system 6 - 8 times for restoration different dates.  None of the restoration system worked.  Still received the error message as "unspecified error occurred during system restore.  Any suggestions?  I ran out of restore points.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

  original title: System Restore problems

  Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

  Hello

  This applies to vista, but use it for windows 7

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and issues of windows 7

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• an unspecified error occurred during system restore whatever that means and what should I do?

  Arisen from the usual Windows, "you want to run windows restoration", after a crash and restart on "restart Windows normally. Then got the

  message "system restore was not successful, your computer's system files and settings were not changed.
  Details:
  An unspecified error occurred during system restore
  Tried a restore point different and got the same message.
  Any help gratefully received
  (Although - we pay enough for it - he should bloody works - all the time!)

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

  When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• Error of full system restore VAIO FZ-430E/B 35 323

  My laptop Vaio FZ-430E/B has been does not start. I replaced the hard drive (500 GB SATA) and used my recovery discs - full system restore. I received the following error message: 323: 35. I watch all the sony Web page and internet, I don't know what means this error message.

  I ran the Vaio hardware diagnostics: no error

  I can't run the Windows Memory Diagnostic tool. I just doesn't work.

  What does mean 323: 35?

  I installed 4 GB (2 x 2 GB) of RAM Corsair. I used the Ubuntu Live CD Memtest. No errors.

• Error with XP system restore

  I'm trying to do a full system on a Compaq Presario 6000 (6320US)
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00009596&tmp_task=prodinfoCategory&cc=us&DLC=en&LC=en&product=213896

  Yes, it's an old computer, I know. : P

  In any case, the problem is that I started the restoration process, got on the second CD and as soon as he tries to read it, I get an error that says: "4194304 0 f:\res256\banner.bmp.

  Now I have already done a lot of research, and said all I think that this problem has already been brought to the top the same two things:
  (1) the cd may be dirty or damaged
  (2) the cd player doesn't work maybe not properly

  1 seems unlikely given that the cd is Mint and about as clean and unharmed, as a cd can be. 2 seems a little more plausible given that I'm using a cd player, I installed after purchase (initial cd player no longer works) and make a system restore can be remove the drivers that allow it to operate. But if this is the case, why he would stop at the 2nd cd? I've seen other people with the same problem in the same exact step in the process, but nobody seems to never come back on the forum to say, "Yes that was the problem and here is how I fixed it."

  Any help would be appreciated. I'm trying to get this computer working for room of my 10 years so he can do the job at home safely, and we both love for that to be resolved quickly.

  Hello JakCapan,

  Have you involved HP/Compaq on this issue?

  If we are unable to complete the restore to factory without problem, then there are two possibilities:

  1. There is a hardware problem.
  2. There is a problem with the recovery disk.

  Let us know.

  Best regards

  Matthew_Ha

• When I run the system on the platform of Vista restore, I get the message "an unspecified error occurred during system restore. I tried several restore points. Anyone have any ideas?

  See above

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• XP - error Code: 0X80072F78 (cannot restore hidden updates)

  Restore hidden update option is grayed out. It won't let me him. have not received updates since 2/2010. all of the suggestions. also receive error 0x80072F78 #. This is for Windows XP. Thank you

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads , http://social.answers.microsoft.com/Forums/en-US/w7repair/threads , http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft