Error code: 0xC0000005

Similar Questions

• reinstalled windows Xp on my new laptop of balance. While making downloads for updates, I get error code 0xc0000005. How can I fix when I can't boot up the laptop?

  I reinstalled Windows XP Pro on my laptop.  While making the updates, I had received service pack 3 and was now the next updates download.  It required a reboot and would not start giving me the 0xc0000005 error code.  I can't even in safe mode.  What can I do other than to start again

  Hi Anthony,.

  You can try the steps in the following article and check if it helps.

  How do I recover from a corrupted registry that prevents Windows XP startup

• Error code 0xc0000005 during installation of tax software

  I have Windows 7 and you are trying to install the software of tax HR, the pop-up with code 0xc0000005 error - me has failed to install the software?

  Is one knows how to fix?

  Anne Laure

  Anne Laure

  Your best bet is to contact the developer.  We have knowledge of MS products right here.

• Error code 0xc0000005 whenever I try to launch my programs,

  .. as record cleaning tool, uninstall some programs (like 4sharedsync), open outlook. I don't know what to do? I have windows vista. I could get my outlook open in safe mode, when I opened my account gmail or yahoo, that I can not add attachments. There is something that seems to block my applications to run, or something missing in my operating system which will not launch my programs. I tried the system restore and restored 06/09/2011 return, but that did not work. I can't even make a backup of the computer - something that blocks as well. Otherwise, I was going to save all my data and reinstall my operating system. Can you help me?

  Hi mehdi_205,

  1. What is you receive the exact error message?
  2. What web browser you use to access Gmail and yahoo mail account?
  3. You have security software installed on the computer?
  4. What happens when you try to join the attachments?

  Method 1

  Check if the problem persists in safe mode with network mode and return to view the results.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2

  If the problem does not persist in the management mode of network in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• HP 15-r033tx Notebook PC: get the 0xC0000005 error code during installation windows 8.1 x 64

  Please help me...

  I get error 0xC0000005 new installation code copy Windows 8.1 x 64

  When the installation process happens to 87% every time I get an error code saying that the installation is not possible.

  I can't install windows 8.1 x 64 version on my laptop.

  Please tell me how to fix and install windows 8.1 x 64 version on my laptop.

  I tried with dvd - rom and usb as well, but the result is the same... just stuck to 87%...can may not be installed...

  How to overcome it... Please...

  @Achintya only,

  Given that the material all past, and he could install another version of windows without problem, I suspect a problem with the 8.1 Windows installation disc x 64. IT may be a good idea to contact Microsoft about this.

  I did a little research and found this on the equivalent of Microsoft of this Council.

  Install Windows Pro 8.1 (detail) fails in step 2 with the error Code: 0xC0000005 -answers.microsoft.com

  There are a few suggestions on this post you can try.

  I hope this helps.

• (KB951847) x 86 has error code 0 x 643

  Update installation failure what to do?

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Windows Update error Code 663 (kb951847) x 86 fails to install

  Windows update fails with error code 0 x 643
  XP, updates Auto, KB951847 and error code 0 x 643
  Error code: 0xC0000005 (cannot install KB951847)

• Can't print pdf. Get the 0xc0000005 error code

  All of a sudden, I can't print PDF on any printer. Error Adobe must close. Code 0xc0000005 flags: 0x00000000. Error report sent.following files will be included in this error report... Temp\283a_appcompat.txt help?

  Monday, February 27, 2012 18:07:16 + 0000, Hula_Baloo wrote:

  Go to http://www.adobe.com and download a new copy of Adobe Acrobat reader.  Something got corrupted in your, and install a new copy should solve the problem.

  Another recommendation: in my opinion, is the free Foxit Reader
  much better than Adobe Reader (although less frequently used). Download
  at http://www.foxitsoftware.com/Secure_PDF_Reader/

  Ken Blake, Microsoft MVP

• Error on blue screen 0 X 0000008 codes #, 0XC0000005, 0XE14DCEB3, 0XB07C2B74

  I got a blue screen with the following error codes: 0 X 0000008 #, 0XC0000005, 0XE14DCEB3, 0XB07C2B74 and 0x00000000. Where do you find these codes on Microsoft?  What they mean and how to fix?

  I have links to error messages (and the Microsoft articles) here: http://www.carrona.org/bsodindx.html

  The first number/letter combo is the STOP error code, while the 4 series of numbers/letters below are the parameters (which tell us a bit more - as 0xc0000005 is a memory access error).

• (0xc0000005) error code when you try to uninstall a trial version of AOL.

  The error report also includes the name of the app: aolunins_us.exe recently, I had to reinstall my OS and have done all service pack updates, etc. Now, I want to take the trail version of AOL, which has been included on the CD of restoration, offshore and it won't let me!  I know how to delete a program and we tried, but when I choose the AOL program it does not give me the option to choose what version so I continue to click on the Change/Remove button a window appears to let me know that windows is looking for the version of AOL on my computer, then another window says uninstall has encountered a problem and needs to close contact microsoft about this problem.  In addition to the error code, the error report also includes the name of the app: aolunins_us.exe can someone help me please?  :-)

  The 0xc0000005 error code means access denied. You could check the permissions for the AOL installation folder and see if you're allowed to it.

  If you are unable to remove it, you may need to look at using 3rd party software removal tool which may help to remove it from your system.

  Thank you

  Marilyn

• BLUE SCREEN of DEATH error CODE * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4)

  I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times.  I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.

  Alex

  While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  When you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.

  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

  And for future disaster recovery programs:

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Blue screen and continuous restarts and repeat. Error code given: ___STOP: 0x00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)

  Today, I started my computer as usual worked well. After about 30 minutes of use it has restarted without having to provide me at all. When the computer reboots, it starts as usual, after the XP loading screen, it goes to blackscreen for a second, then a blue screen error message appears, then disappears. The error code given is:

  STOP: 0X00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)

  I managed to take a picture of him just during one of the reset and got this. Incase you need to see the full message. http://img21.imageshack.us/img21/9268/1image0421.jpg

  Initially I thought it was a stick of RAM going bad, so did reinstall each stick etc. to know who does what, and all the sticks started the computer at this point where I get the blue screen. Then maybe this issue is not a RAM? I have NO idea what this error code is... Does anyone have an idea? I did my share of research on the internet and that you have not really found any answers for my situation.

  Solved. I put in my XP CD and booted from it, press ENTER for a new installation, then to the next option, press 'R' or a repair installation. After he went on his own thing, its up and running again, and all my files/preferences have been saved too. The only thing that was wiped out was my WINDOWS folder, so I just need to download IE8 and updates for XP etc.

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I stop error 0x0000007E (0xc0000005, 0x8ef5ac0d, 0x8b357bf8, 0x8b357f4) code

  Here's the story:

  My cell phone is not responding, so I stop and restart. Then when I enter my user account, it is empty, no icon on the desktop no taskbar, only the slider that appears. I'm frustrated and don't know what to do. Since my laptop already has a few problems (it's a bit slow) so I decided to use the system recovery and restore the "factory shipped condition."

  Then I install any program that was previously in my laptop (firefox, software adobe reader, media player, flash player, player virtual clone, Utorrent, VLC player, WinRar, Internet Download Manager, Spyware doctor and NoAdware classic). But when I plug my laptop modem, I got a blue screen, and I am one of the software is not compatible with my modem. So I use the recovery system once more and intend to try the software one by one. I plug the modem first. then I got blue screen. So I try to uninstall norton internet security (he was there from the beginning) and try to connect the modem. He works so I thought that norton is the cause but I'm always worried, so I try the software one. Install software on my external hard drive, plug the hard drive, try plugging the modem, taken on the modem and try reinstalling other software). Until the latest software has been installed, there is no problem. Then I plug the external hard drive after installing the latest software and updated online using the modem (to open hotmail and send my homework) then I plug in the modem and plug my external hard drive to watch videos. Then, I suddenly remember to download something. So I plug the drive hard on and plug in the modem. Then I got a blue screen with this error:

  Stop: 0x00000007E (0XC0000005, 0X8EF5AC0D, 0X8b357BF8, 0X8B357F4)

  CDROM.sys: address 8F555C0D base at 8F14C000, stamp base 47918f7e

  Then I try to restart the laptop and try to connect the modem, but I got a blue screen with the same error code

  What should I do?
  How can I stop it?

  It would be helpful if someone can solve this
  Thanks :)

  * Sorry for my bad English *.

  Hi Patrick,

  I suggest you follow the given method and check if it helps.

  Method 1: Update your modem firmware.

  You can check with the manufacturer or contact the Internet service provider to update your firmware.

  Method 2: Alternatively, you can try to install service Pack 2 on your computer.

  Please follow the link below to install the Service Pack 2;

  http://support.Microsoft.com/kb/935791

  I hope this helps.

• HOW DI I STOP ERROR 0X0000007E 0XC0000005, 0X8A27FB97, 0X859C1BA8, AND 0X859C18A4 CODE

  HOW DI I STOP 0X0000007E 0XC0000005, 0X8A27FB97, 0X859C1BA8, AND 0X859C18A4 ERROR CODE OCCUR?

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Unable to print error: ' 0xf4896fda caused a protection fault (code 0xc0000005 exception).

  Original title:

  Printing error on HP OfficeJet Pro 8500

  I'm on Windows7 64 bit and that you have installed the solution Center HP for the operating system of law.  Digitization of works fine but when trying to print on HP OfficeJet Pro 8500, an error message says "0xf4896fda caused a protection fault (code 0xc0000005 exception).  What should I do?

  Hello
  1. If it works much earlier?
  2. You did changes to the computer before the show?
  3. You are not able to print files or specific files?
  4. How the printer is connected to the computer?
  5. How you want to print? With the help of what program?
  6. The problem occurs with printing online or offline?
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 2:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Method 3:
  You can try to update printer drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752456#n301

  HP Print and Scan Doctor

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=OJ-106151-2&CC=US&DLC=en&LC=en&os=4063&Product=3752456&sw_lang=
  You can also consult the following link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  I hope this helps!