Error code: 641 installation of Windows and Microsoft Silverlight updates does not

Similar Questions

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• PIXMA MG5220. While changing ink got the C000 error code. Tried to turn on. It still does not.

  I changed the ink when I got a C000 error code. He said turn the printer off, then on and if it still does not read the manual. The manual is no refernce this error code. Any ideas?

  Thanks in advance.

  Hello.

  This problem may occur when there is a loose object stuck inside the printer, or if one of the ink tanks was not sitting correctly.  Please, try the following:

  1. with the cover open, disconnect the power supply to the back of the printer or the wall.

  2. search for all objects or in the printer packaging material, delete if necessary.

  3 gently move as close to you as possible ink tank support.  Try to push the nearest ink tank down.  Once activated, try to close the ink tank support, repeat as needed.

  If you encounter resistance, do not go away while: support of the ink tank.

  If the error persists, find more help contact us.

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Error Code 80070663 - installation Problem__ Windows security update

  Hello
  I have a problem installing some updates for Windows Vista. I received the error code 80070663 during the installation of the security updates. When I tried to install the same updates from the Windows Download Center, an error message pops up that says that my windows installer has been altered, so I couldn't download the security updates. I don't know what to do now. Please advise! Thank you!!

  MH321,
  Here are a few things to look at who can help.

  Solve Windows Update installation issues

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Code 8024200d for KB970430, KB972145 and KB981793 KB967723 updates.

  Hello!

  I get error 8024200d code for KB970430, KB972145 and KB981793 KB967723 updates.

  I ve formatted the primary HD after having been infected with the "AntiMalware Doctor" - virus and nothing kept the old full Vista Edition installation. I installed Vista Ultimate again once and successfully installed all updates offered by Windows Update. After that, I installed Norton 360 v3.0 without any problem. I continued to install Office Ultimate 2007 and all updates offered by Windows update. Once again no problem.

  After this Windows Update Agent 7.4.7600.226 were installed successfully. Then, the following facilities have been attempted:

  Update for Windows Vista (KB972145) - failed.

  Update for Windows Vista (KB972145) - failed.

  Update for Windows Vista (KB981793) - failed.

  Update for Windows Vista (KB971644) platform - success

  Update for Windows Vista (KB967723) security - has failed.

  Updates failed have been tried several times that it recharges but don't settle. Then an other update have been installed successfully:

  Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) - success.

  Previous updates failed tried again several times but all failed once again. The computer recognizes the updates available and try to install them when I turned off the computer, but not luck.

  What can I do to fix this?

  Computer:

  Intel P4 3.0GHz

  2.0 GB RAM

  Windows Vista Ultimate 32-bit (with SP2 KB948465 and some updates after that)

  Office Ultimate 2007 (with 2007 Microsoft Office Service Pack 2 (SP2) suit)

  Norton 360 v3.0

  (TM) 6 update 21, Adobe Flash Player 10 ActiveX/Plugin

  Thank you!

  Marcus

  Thank you for your time Halima S!

  I tried what you suggested but unfortunately it has not worked for me this time. After giving the complete reinstall of Vista, everything seems to work fine when it comes to the OS.

  Now if only slightly damaged Office Ultimate 2007 DVD would work as if by magic...

  Thank you!

  Marcus

• Error Code 800706BE when installing Windows Live Essentials 2011 update

  Original title: 800706BE error Code

  I installed the latest update of Windows Live Essentials 2011 windows. Part of the way in which the process, I was asked what I wanted to download and I chose the minimum download which has been downloaded and installed. However, the main download window seemed stuck at the end of 50% and he hung up to 50% more than an hour. I tried to stop the download but that did not work. I restarted the computer, the download stopped, but it is to show that the State of the download as failed. Is it serious if so how I can restart?

  Thank you

  Jerry

  Hi Jerry,

  This is an existing thread for the error code you provided.

  Windows Live essential 2011 (KB2434419) code 800706BE error. Update failed. How can I retry the update?
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/61969eaf-30b6-45D7-97E4-bd8a63056f56

  See if the suggestions work. In addition, the message would be more appropriate in the Windows Live Forum.

  http://windowslivehelp.com/forums.aspx?ForumID=a372972e-8e7a-4d85-ADC3-a1b43e8c02ec

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2753 error code when you try to uninstall microsoft silverlight

  not had this problem before with netflix watch, but now I get this screen to download microsoft silverlight, but it's already installed netflix customer said to uninstall the old microsoft silverlight, but I get this error code 2753

  How to clean a facility damaged Silverlight and then reinstall Silverlight

• Error code 52 on HG62 Notebook PC - cd/dvd drive does not

  Hello

  BIOS recognizes my cd/dvd rom drive, but if I insert a disc, nothing happens. Can't find the workstation link player.  I tried to figure out how to download a new driver in the hope that the problem will be resolved, but continues to run into dead ends.

  My product number is XZ267UA #ABA and model number is HP G62-407DX notebook PC.  The operating system is Windows 7 Home Premium 64 - Bit (6.1, build 7601).

  In Device Manager, under my CD/DVD Rom drive, I get an error "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)'.

  Can someone please help with this problem?  Thanks in advance!

  Kristen

  Hello Kristen,

  Try the following.

  Shut down the laptop.  Here tap f8 as soon as you press the power button to start the Windows Recovery Console.  Use the arrow keys to select "Disable driver signature enforcement" and press ENTER.

  When windows is loaded, the optical drive now shows under "computer"?

  If it now works Ok, try restarting the laptop - if the error doesn't happen again not great then, but if this is the case, the best option would be to replace the CD/DVD driver as follows.

  1. download the utility which will add "Take Ownership" to the contextual right click menu.  The download is on the following link.

  Appropriating

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip (if you have a 64-bit version of Windows, you need this version of 7-Zip ) which can be used to open it so that you can run the Setup program.  Then just right click the folder zipped, select 7 - Zip and extract the files.  When you're done, open the newly extracted folder and you can find the utility to add "Take Ownership" to the right click menu.  Double-click it to install it and then close the window.

  2 open windows control panel, open Device Manager, open CD/DVD-ROM drives.  Click with the right button on the drive and select uninstall and click on the prompt to complete this.

  3 click on the Start Menu, open computer, double-click Local C drive, open the "Windows" folder, open the "System32" folder, right-click on the "drivers" folder and select Take Ownership.

  Just below this folder, open the folder "DriverStore", open the "FileRepository" folder, open the folder that starts "cdrom.inf", right click the ' filecdrom.sys' and select copy.

  Close all open windows and then paste this file to your desktop.

  4 still once, click on the Menu start, open the computer, double-click Local C drive, open the "Windows" folder, open the "System32" folder, then this time Open the folder "drivers", right-click and select Paste.  You should now get a prompt that the file already exists - select the option copy and replace and click on all additional guests to complete it.

  Once finished, close all open windows and reboot the laptop - see if this has corrected the error.

  Kind regards

  DP - K

• Installation of Windows 8 to 8.1 does not

  This was annoying for like 6 months. First of all, the update of windows appeared on my screen and I am able to download. He did the thing 'you have 15 minutes to save your stuff' and then I press the button restart and all I see is the hp (my laptop is hp) logo sitting there and this thing of spinning at the bottom just like when windows starts up. LARGE. But then it just stay there. On the forums and the installation guide that it is said that it can take an hour, but IT WAS TURN for up to 24 HOURS once I tried. I just give up at the end and press the power button. Whenever I tried it just runs.

  I did all the things like

  -Clear the cache windows store

  -Disable the third-party antivirus

  -Unplug all devices

  -have a good connection internet (I used Ethernet btw)

  -J' even used the upgrade wizard

  AND I GET THE SAME RESULT EVERY TIME. I leave my phone for 1 or 2 hours sometimes see if it will work magically one day but is not. I need to get windows 8.1 because windows 8 sucks and I want to get windows 10 in the future.

  PLEASE SOMEONE HELP!

  Hello

  Thanks for the update on the issue. I appreciate your efforts to solve this problem.

  Startup files are corrupt that might cause this problem.

  Installation media is required for troubleshooting this problem. If you do not have the installation media, you can create installation media. To do this, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Try the following methods to diagnose and resolve the problem.

  Method 1: Run the auto repair

  Go to the advanced options and run auto repair. It will repair the basic components of Windows and fixed the software.

  Boot recovery environment with the installation of Windows Media 8 It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the Windows 8 installation DVD into the DVD-ROM (or the connected USB port), and then restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the type of keyboard and good time .
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair screen Options Advanced .
  (g) then choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  If the problem persists, try Method 2.

  Method 2: If the auto repair fails, then I suggest you follow these steps.

  a. boot from the recovery media.

  b. click on repair your computer.

  c. click Troubleshooting , and then select Advanced Options.

  d. click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  e. restart the computer.

  Hope this information was useful. Do not answer with the results of these methods for additional help on this issue.

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• I recently got an automatic update of Windows and now my iTunes does not... and neither is NO sound at all. Help, please!

  Windows automatic updates from time to time, and since the last of them, not only my iTunes plays not anything... my sound on my computer does not work for anything.  I can't watch any videos/tv shows/listening to music... NOTHING.  Help, please

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Update for Microsoft Office InfoPath 2007 (KB976416) __Installation status: Failed__ Microsoft Office updates does not install any one of them fails to update. __

  Updates of Microsoft Office is not installed

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• FF22 and prefs.js custom installation, bookmarks.html and override.ini FF23 does not

  Try to customize the installation of FF22 or FF23 for business environment.

  I have done this several times with several previous versions. FF19 and 20 being the latest versions of success, it worked. (I wasn't 21).

  All I ever had to do was to extract the FF setup.exe and add three files. Then run setup.exe - ms to perform the custom installation. None of these files have changed for some time.

  core\override.ini
  core\defaults\profile\prefs.js
  core\defaults\bookmarks.html

  With FF23 and FF22, none of these changes work not at all. What has changed and how to fix it? Or is it a bug that needs added to Bugzilla?

  TIA for any help.

  Hello pfurches, the path where these presets should go in a changed recently: http://mike.kaply.com/2013/05/13/more-major-changes-coming-in-firefox-21/

• keyboard shortcuts for the tool window and zoom of hand does not

  2 of my most used keyboard shortcuts don't work anymore. Please help me to get back them. I tried making them back in the application and on the BONE and it won't work. I need the hand tool = SPACEBAR for panning and zooming window = space bar on command

  Erika,

  So I think that you must reinstall using the way complete three steps (as mentioned in 6):

  Uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html