error code 8-ffa-000 d (80040154) Please help

Similar Questions

• The KB2833941 could not be installed/updated on my laptop. Error code is 0 x 643. Please help me solve this problem. Thank you!

  The automatic update and the update manual impossible to install/update on my Toshiba Tecra M2 KB2833941 about 6 times since July 10. The error Code is 0 x 643. I couldn't solve it by myself. Please kindly help me to fix it. Thank you!

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If this does not fix it try this...

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941

  I would like to know what method worked for you.

  Ref: http://support.microsoft.com/

• I tried to download the update kb973636 Dungeon receive error code 436 have tried every thing please help

  I have sent 2 emails to microsoft but heard notting comes back with this problem, I never had worries before downloading updates

  Hello

  Do you have Works version 8 is installed on the PC?

  You can HIDE the update - panel - updates of Windows - right-click on LEATHER.

  And download it manually IF you need. Glitches like this sometimes happen.

  KB973636
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=6f96de9a-62d8-428F-9567-51d55c129be6

  ------------------------------------------

  Then proceed as follows:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Unable to run windows update error code A 8024, 000

  Original title: 8024A 000 error

  I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

  Hi all.

  solution:

  Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

  of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

  This works.

  The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

  This driver 11 version solves the problem with windows Update error A 8024, 000.

  (have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

• Update Windows Vista error code A 8024, 000

  I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

  After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

  I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

  Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

  I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

  After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

  I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

  Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

  Already answered here... Please take a look

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Vista-update-error-code-8024a000-after/c5f85a66-7418-41de-aa31-208071a9ea85

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-perform-Windows-Update-error-code/ccc838fe-21ec-460B-8b0b-6863697a5550

• Update Windows Vista error code A 8024, 000 after replacing the HARD drive

  Hello

  I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

  After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

  I tried the solution provided in this thread, but did not work for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

  I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

  Any help is appreciated.

  Thank you.

  Eugen

  Hello

  1. which utility Microsoft Fixit did you tried to load?
  2. what happened when you tried to load the Microsoft Fixit utility?
  3. what was the error message when you try to update the installer?
  
   
  Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
   
  Method 3:
  
  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/946414
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
  Download Windows Vista Service pack from here:
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Reference:
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  Hi BobPryce,

  Please see: 2203 error when installing the Adobe Creative Suite 4 products, 5 or 5.5 or updates

  Kind regards

  Mohit

• Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night updated my O.S.

  Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night my O.S. Update prepares to use the Flash, and now I can't download it. I have I need to work on important projects.

  Hello Becca,

  Please try to download the CC application directly on the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Hope that helps!

  Kind regards

  Sheena

• Error 213:10 on windows 10. Please help solve the problem

  Error 213:10 on windows 10. Please help solve the problem

  Different code, but can help - error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions

  Run all programs as Administrator http://forums.adobe.com/thread/969395 to assign FULL... Permissions said yet, but it is sometimes necessary for Adobe

• Error code 80040154, Please HELP!

  Hi, guys. I just joined because I can't seem to find a solution for the problem that seemed to just start today... and I don't know much about computers except how to cause problems!

  I currently have a laptop with Windows Vista Home Premium Service Pack 2 and running a 32-bit operating system.

  I just installed Norton 360 Version 4 on the computer yesterday, and that's when my problems began. I don't know if I'm having a conflict with the anti-virus program and windows, so Windows is having the problem.

  The thing is, Windows Defender will not download updates, and does not update Windows. It was working fine before, but now it seems that it is having serious problems.

  When I try with Windows Update, I get this: "code 80040154."

  When I try it with Windows Defender, which tells me that in the Security Center, is obsolete and should be checked for updates, I get this: "error found: code 0 x 80040154."

  Does anyone have this problem? If so, how it was fixed? And please, try to explain as clearly as possible, because I think I could have found the answer somewhere else here, but I did not understand what the devil posters spoke.

  Thank you!

  veesis1 wrote: I have the same error code displayed with Windows Update, but install the updates of Windows Defender. I had Norton Antivirus and it has expired, so I bought Webroot. Webroot recently expired, so I downloaded Avast! In my case, Windows Update has not worked for at least 6 months...

  Should have replaced free NAV before your subscription or trial period expires (and you must have run the Norton Removal Tool before installing a replacement AV app, too). Then you would have replaced the Webroot request before that your subscription has expired or the free trial period.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot perform the update Windows with the error code A 8024, 000

  Original title: error code 8024A 000, does that mean?

  I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?

  Hi Anthony,

  1 are you facing this problem with any particular Windows update?

  2. What are the troubleshooting steps you have tried?

  Please follow the links and check with the question:

  Method 1:

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Method 2:

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  I hope this helps.

• Windows update error code A 8024, 000

  can not get updates not yet automatic, manually treid keep getting error code 8024A 000, please help.reply to my email, thank you.

  Please see the Symptoms section of this article in the MS Knowledge Base-

  Based on ESENT and applications that run on a Windows Vista-based or Windows Server 2008 computer may not work properly after the reported physical sector size changes to storage device

  If the failure to initialize the entry of the data store is present in WindowsUpdate.log (error code may differ) How to read the Windowsupdate.log file

  FATAL error: Failed to initialize the data store, error = 0xC8000222

  Or if it will appear in the application event log

  Log name: Application
  Source: ESENT
  Date:
  Event ID: 412
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer:
  Description:
  c:\windows\system32\wuaueng.dll (936) SUS20ClientDataStore: unable to read the header of logfile C:\Windows\SoftwareDistribution\DataStore\Logs\edb.log. Error-546.

  Then suggest that ask you the fix to resolve the Windows Update service doesn't work.

• Pavilion dv6t-2000: Post recover process reimage disk - windows update error code a 8024, 000

  Hello

  After replacing my old HDD with a new SSD, I successfully used my purchased 1 & 2 recovery discs to reload Windows 7 x 64.  Now, I am able to connect to the internet and navigate through Internet Explorer, but I can't get Windows Update to work.  I get this error: Windows Update 8024A 000 error Code.

  I researched and found this fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-error-code-8024a00...

  However, after you follow the steps to stop services, rename the specified files, register the dll, and then finally to leave the services, I'm still having the problem.  I also ran a utility "fix" looking for issues with the Windows Update utility, it has been correctly executed and said it solved the problem, but the problem persists.  I get more a 8024, 000 of the error, but the update still does not work.

  I don't him have not yet tried this, because of the weather, but will plan no later than today:

  In safe mode, access c:\windows\ and rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old.
  OK and restart.

  I also tried to upgrade to the latest version of the Windows Update utility which has as well.  I can install other applications (e.g., Norton anti-virus, java, adobe flash player) without problem.

  I noticed that I have not installed ServicePack 1, I did before as I have reimagee my computer. I need to install this first?

  Anyone has any ideas, or did I miss something?

  Your help is appreciated!

  Thanks, Orrin

  I was able to find a solution to this problem.  It is a problem with the HP recovery disk image.  It does not correctly install the Intel Rapid Storage Technology driver.

  To resolve this issue, go here: https://downloadcenter.intel.com/download/20868/RAID-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards

  Download and install the version appropriate for your respective operating system.  As soon as it was installed it fixed my Windows Update doesn't work not, error: 8024a 000

  Thank you

  Orrin

• error when you try to update: "windows has not can find new updates, error code A 8024, 000.

  Original title : I can't update my computer... can anyone help me?

  I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

• When I try to install Creative cloud it says error code 205 on mac fix it please

  It says loading on the installer says "random things" error code: 205

  I'm on mac

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html