Update Windows Vista error code A 8024, 000

I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

Advertisement

I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

Already answered here... Please take a look

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Vista-update-error-code-8024a000-after/c5f85a66-7418-41de-aa31-208071a9ea85

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-perform-Windows-Update-error-code/ccc838fe-21ec-460B-8b0b-6863697a5550

Tags: Windows

Similar Questions

  • Update Windows Vista error code A 8024, 000 after replacing the HARD drive

    Hello

    I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

    After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

    I tried the solution provided in this thread, but did not work for me:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

    I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

    Any help is appreciated.

    Thank you.

    Eugen

    Hello

    1. which utility Microsoft Fixit did you tried to load?
    2. what happened when you tried to load the Microsoft Fixit utility?
    3. what was the error message when you try to update the installer?

     
    Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
    The problem with Microsoft Windows Update is not working:
    http://support.Microsoft.com/mats/windows_update/
    Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:

    sfc/scannow
    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833
     
    Method 3:
    0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
    http://support.Microsoft.com/kb/946414
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/322756/
    Download Windows Vista Service pack from here:
    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791
  • Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

    Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
    I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

    My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
    This issue has been hard for awhile and its a little boring.
    Thanks in advance.

    Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

    8 test cycle.

    NB: Your Norton application can disable Windows Defender by default.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Update Windows Vista error Code 80070490

    Unable to update Vista, the error is of course Coded "80070490" is there a solution to this problem in Microsoftaving updates to make sure that the machine is working properly

  • Update Windows Vista error code 80071AA7

    Need help with fixing update error code 80071AA7

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

  • cannot update windows vista error code 80080008.

    Tried this:

    "Click Start, select run, and type the following (pressing well after each one):-

    NET.exe stop wuauserv

    regsvr32 c:\windows\system32\wuapi.dll
    regsvr32 c:\windows\system32\wuaueng.dll
    regsvr32 wuaueng1.dll
    regsvr32 c:\windows\system32\dllcache\wucltui.dll
    regsvr32 c:\windows\system32\wups.dll
    regsvr32 wups2.dll
    regsvr32 wuweb.dll
    Regsvr32 MSXML3.dll

    NET.exe start wuauserv ".

    The third command 'regsvr32 wuaueng1.dll' I get the error message that the specified module could not be found.
    What to do next?

    Is this the same computer (not necessarily the same problem) as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/ive-got-windows-vista32-bit-windows-update/868fa783-a555-41bc-bab5-1a4771c37f43

  • Unable to run windows update error code A 8024, 000

    Original title: 8024A 000 error

    I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

    Hi all.

    solution:

    Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

    of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

    This works.

    The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

    This driver 11 version solves the problem with windows Update error A 8024, 000.

    (have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

  • Update Windows KB2833941 error code 0 x 643

    Original title: update Windows KB2833941 error code 0 x 643. With the help of windows XP Edition family. Version 2002 sp3, Explorer 8, Vr 8.0.6001.18702, 128-bit. Used security is Bitdefender Total Security.  Thank you.

    Get the error code 0 x 643 on Windows update KB2833941.  With the help of HP Mini PC laptop with windows XP Home edition version 2002.  Have Explorer 8 8.0.6001.18702, 128-bit encryption version.  Security software is Bitdefender Total Security. I hope someone can help.  I'm not that savy in the fix - it category.  Thank you.

    Hi Wayne,

    Refer to the link below and follow the steps to resolve this problem, manually

    Or run the auto option "fix it for me".

    Error codes ' 0 x 80070643' 0r '0 x 643' occurs when you install updates .net framework.

    http://support.Microsoft.com/kb/976982

    Automatic 'fixit '.

    http://go.Microsoft.com/?linkid=9666880

    When you are finished, go to windows update to check if the problem is resolved.

  • Cannot install updates Windows XP error Code 0 X 80070670

    original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

    CONTINUE WITH WHAT?

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.  Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • Cannot perform the update Windows with the error code A 8024, 000

    Original title: error code 8024A 000, does that mean?

    I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?

    Hi Anthony,

    1 are you facing this problem with any particular Windows update?

    2. What are the troubleshooting steps you have tried?

    Please follow the links and check with the question:

    Method 1:

    How to reset the Windows Update components? :

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

     

     

    Method 2:

     

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

    http://support.Microsoft.com/kb/2509997

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    I hope this helps.

  • 80073AA2 Windows Vista error code update KB973917 and KB970430 Frustration!

    I have a problem installing the updates on my 32-bit Windows Vista laptop. I have both updates KB973917 and KB970430 both indicate the error code 80073AA2 and two KB976325 and KB971737 updates showing the error code 800F0826.  The laptop has the message that it is install update 3 of 3, is 100% then says that the updates have not been configured correctly - he keeps trying to install updates.

    I find it quite frustrating because this is the second time (the last was SP2) this year that updates have not properly configured and as a geek no I'm not able to settle this issue myself!  I got a very helpful guys at Microsoft call me before; However, if I can get some advice on how to fix myself I would be very grateful!

    Thank you, Maggie Ross.

    @MeggyRoss: Try this triple McAfee fix, especially if you are using McAfee Security Center-Online http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Pavilion dv6t-2000: Post recover process reimage disk - windows update error code a 8024, 000

    Hello

    After replacing my old HDD with a new SSD, I successfully used my purchased 1 & 2 recovery discs to reload Windows 7 x 64.  Now, I am able to connect to the internet and navigate through Internet Explorer, but I can't get Windows Update to work.  I get this error: Windows Update 8024A 000 error Code.

    I researched and found this fix:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-error-code-8024a00...

    However, after you follow the steps to stop services, rename the specified files, register the dll, and then finally to leave the services, I'm still having the problem.  I also ran a utility "fix" looking for issues with the Windows Update utility, it has been correctly executed and said it solved the problem, but the problem persists.  I get more a 8024, 000 of the error, but the update still does not work.

    I don't him have not yet tried this, because of the weather, but will plan no later than today:

    In safe mode, access c:\windows\ and rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old.
    OK and restart.

    I also tried to upgrade to the latest version of the Windows Update utility which has as well.  I can install other applications (e.g., Norton anti-virus, java, adobe flash player) without problem.

    I noticed that I have not installed ServicePack 1, I did before as I have reimagee my computer. I need to install this first?

    Anyone has any ideas, or did I miss something?

    Your help is appreciated!

    Thanks, Orrin

    I was able to find a solution to this problem.  It is a problem with the HP recovery disk image.  It does not correctly install the Intel Rapid Storage Technology driver.

    To resolve this issue, go here: https://downloadcenter.intel.com/download/20868/RAID-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards

    Download and install the version appropriate for your respective operating system.  As soon as it was installed it fixed my Windows Update doesn't work not, error: 8024a 000

    Thank you

    Orrin

  • error when you try to update: "windows has not can find new updates, error code A 8024, 000.

    Original title : I can't update my computer... can anyone help me?

    I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

    See this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

  • Windows update error code A 8024, 000

    can not get updates not yet automatic, manually treid keep getting error code 8024A 000, please help.reply to my email, thank you.

    Please see the Symptoms section of this article in the MS Knowledge Base-

    Based on ESENT and applications that run on a Windows Vista-based or Windows Server 2008 computer may not work properly after the reported physical sector size changes to storage device

    If the failure to initialize the entry of the data store is present in WindowsUpdate.log (error code may differ) How to read the Windowsupdate.log file

    FATAL error: Failed to initialize the data store, error = 0xC8000222

    Or if it will appear in the application event log

    Log name: Application
    Source: ESENT
    Date:
    Event ID: 412
    Task category: registration/recovery
    Level: error
    Keywords: Classic
    User: n/a
    Computer:
    Description:
    c:\windows\system32\wuaueng.dll (936) SUS20ClientDataStore: unable to read the header of logfile C:\Windows\SoftwareDistribution\DataStore\Logs\edb.log. Error-546.

    Then suggest that ask you the fix to resolve the Windows Update service doesn't work.

  • Impossible to update KB249163 on windows vista-error code 80070026

    Original title: Windows Update problem

    I can't install the update for Vista KB249163; get the error code 80070026.

    Hello

    1 did you do changes on the computer before the show?
    2 are you able to install other updates successfully?
    3 mention is the correct KB number.
    Follow these methods.
     
    Method 1: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
    http://support.Microsoft.com/kb/929135
    Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.
     
     
    Method 2: temporarily disable the security software.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
     
     
    Method 3: you can also manually install updates (KB number) by downloading from the Microsoft Download Center.
    http://www.Microsoft.com/downloads/en/default.aspx
     
     
    Method 4: follow the steps in the article.
    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/822798
     
    Response with the correct number of Ko, Ko you mentioned talking about article:
    The KB 249163 talks about 'Orders seen in a Network Trace LDAP':

Maybe you are looking for