Error code: 80070017 every time I try to install Windows Explorer 8

Similar Questions

• Error message 0x8024400a every time I try to use Windows update.

  I reinstalled XP Home Edition on my laptop using a recovery disc included when I bought my computer. The re-install worked perfectly out I get the 0x8024400a error message everytime I try to use Windows update. In other words, that I can't install updates at all, which means that I can not install anything that uses .net framework, that is quite a lot of software.

  How can I fix this please?

  I don't want to pay for a new operating system when those supplied with the notebook 2004 should work, but doesn't.

  I reinstalled XP Home Edition on my laptop using a recovery disc included when I bought my computer. The re-install worked perfectly out I get the 0x8024400a error message everytime I try to use Windows update. In other words, that I can't install updates at all, which means that I can not install anything that uses .net framework, that is quite a lot of software.

  
  How can I fix this please?

  I don't want to pay for a new operating system when those supplied with the notebook 2004 should work, but doesn't.

  Well, you use an old laptop of 8 years with a 11 year old operating system - it takes a little go extra step to get things.

  I guess you all hardware from the manufacturer drivers so that everything works?  You can verify that you have the latest versions by visiting manually from the manufacturer web page, support and drivers section and go through at least the most important... chipset motherboard, video, audio, network, etc.

  After that...

  Have you installed the Service Packs again?

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now try to get updates.

• Error code 80070005 dt0000 when you try to install Windows Vista updates

  can not get updates to windows vista and tried the fixit program and cannot install the PowerShell program this fixit needs

  Hello

  Please follow the links below to solve the problem.

  Method 1

  Start your computer in a clean boot

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you follow step 7 of the article mentioned above to set the Normal upward Start computer after troubleshooting is completed.

  Once the computer is in a clean boot state try install updates.

  Method 2

  Disable your antivirus software and firewall

  Step 1

  Disable the Antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2

  Disable the firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Once you have performed the steps in the above links are trying to install the updates.

  Method 3

  You can also try the steps mentioned in the link mentioned below under resolution- I would like to fix it myself.

  http://support.Microsoft.com/kb/822798

  Hope this information helps.

• every time I try to install something windows tells me I can't install it because I install another prgm, but don't want to install anything...

  every time I try to install something windows tells me I can't install it because I install another prgm, but don't want to install anything...

  Hi MatthewMessmer,

  1. Did you the latest changes on the computer?
  2. You receive the error message when you try to install a program on the computer?
  3. You have security software installed on the computer?

  Method 1

  First restart the computer and try to install programs on the computer.

  I suggest that you restart the Windows Installer service and check if it helps.

  Refer to the article below and try the steps listed in the section Windows installation problems, check to see if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Method 2

  If the previous step fails, then temporary disable the security software on the computer and check if that helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• 'ERROR 8024200d' this is the error code I get when I try to run Windows update

  code 8024200 D is the error code I get when I try to run Windows update. My Windows Vista computer is SP2 after you install updates.

  I tried installing several times with no luck and end up with the same error code. I have "Microsoft Security Essenial" installed on the PC.

  Thank you

  Hello
  You can follow below link that can help you to solve your problem:
  Windows Update error 8024200d
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
   
  Note: Above the article implies on error 8024200 d.
   

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• Error 0 x 80070103 when you try to install windows vista

  I have windows xp media center edition version 2002 with service pack 3, when I try to install windows vista home basic he said: I do not have enough memory for temporary files and I should free space on my drives. What exactly should I do? I don't have much on my computer to begin and I already uninstalled all unnecessary files, I could think of. Any help would be appreciated thanks.

  Hi sargent_bilko,

  Please use the forum for Support of Vista,

  What is your hard drive? Did you check how much free space on your hard drive?
  Please run the Vista Upgrade Advisor before trying to upgrade to identify your problem:

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx

  Let us know the result of Vista Upgrade Advisor, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• code 646, every time I try to update my computer it keeps giveiing me erroe code 646

  every time I'm trying to update my computer it keeps giveiing me erroe code 646

  ratcehtboi,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121>

  Let us know if this helped.

• error 0x8024400A every time I try to use windows update

  I get an error code whenever I try to use windows update.  Also it won't let me download sp3, if I do it manually when I restart my computer will only start in safe mode.

  Hi theshow79,
  I am social media and dell community team Shahiruddin.

  Regarding your update problem:
  The error seems to be related to Windows Update - http://support.microsoft.com/kb/836941

  The article has a base of troubleshooting associated with your update problems and also try install ActiveX Assembly and then try to update
  For more details can you tell me what operating system do you use?

  What about your computer starts in safe mode:

  Make sure that you disable the startup option in the system setup, please follow the steps below:

  1. once the computer starts in safe mode, click the Start button, type msconfig in the search box and then in the list of results, click msconfig.exe.        If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the System Configuration dialog box, click the Startup tab.

  3. According to the start option, uncheck secure boot and apply the settings and restart the computer.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thank you & best regards
  DELL_Shahiruddin_S
  Dell social media autoresponder reference
  https://Twitter.com/DellCares
  http://www.Facebook.com/Dell

• error: 800F0900 every time I try to install Service Pack 2

  Service Pack 2 will not install. I tried several times and the new strains preparation tool has been downloaded and it still doesn't work.  It drives me crazy.  Anyone know what this error code means?  I can't download the pack either manually.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• error every time I try to install itunes

  I tried to install itunes on my computer, but it keeps coming up that an error has been encountered refractory instalation and run again or press on finish I ran it over and over again but the same error keeps coming up I need help

  Use "Revo Uninstaller" (* download the trial version that you can make a more complete/aggressive withdrawal) to LFR completely all Apple products (iTunes, Quicktime, etc.) it's may already be on your system.  I suggest to use Revo Uninstaller to uninstall itself when you're done, if you do not plan to buy it.

  Restart the system.

  Do a thorough cleaning and updating your system...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  -Install iTunes and enjoy your workhorse more likely.

• Install errors with Windows XP Sp3 every time I try to install the updates or software, I get an error message telling me that I have a current installation.

  I have Windows XP version 2002 SP3 and when I try to download and install updates, windows messenger or things like this I get an error message telling me that I can not install because of an another current installation, I tried to find what is installing but I can't pinpoint what or where its tring to install. Y at - it somewhere I can look at or a program I can run to find this mysterious install so I can kill him. I really apperciate any help on this. Thank you...

  Hi friskymarine,

  1. do you run any Setup before the show?
  2. what updates you trying to install?

  We recommend that you restart the computer before start you the installation of update. If the problem persists, then reregister the Installer engine. To do this, try the following steps:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
  MSIExec /Unregister
  MSIExec/regserver
  c. check the difference.

  Task Manager to use to see if any background program or process is running: http://support.microsoft.com/kb/323527

  Visit our Microsoft answers feedback Forum and let us know what you think.

• And error codes 0000646 0000643 after I try to download windows updates

  Impossible to make windows upates. only 1 of the 15 updates succeeded.

  Operating system? Question, Windows or Office updates?

  Lack of information can make only suggestions:-

  1. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  You can not install a service pack for Office 2003
  http://support.Microsoft.com/kb/884298

  2. maybe it's updates of framework-

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  3. option: Windows Update agent than wups2.dll file is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important (Vista)

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Every time I try to install something, that I still get a notice saying that it is a current installition.

  Whenever I try to install something that I keep on getting a notice saying that there is a current installition to complete, but I don't know what it is or how to find, how can I solve this problem?

  Hello

  ·        You did changes to the computer before the show?

  ·        It comes with everything that you install or is limited to a particular application?

  ·        You receive an error with the error code?

  Method 1: I suggest that you put the computer in a clean boot, and then try to install the program and check if it helps to find the cause of the problem:

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps in the link and check if it helps:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• Error Code D59. -When you try to install Microsoft SQL Server 2005 KB2463332

  I get D59 error Code when you try to install Microsoft SQL Server 2005 KB2463332. Any suggestions?

  Hello

  Try to download and install manually and check:

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D09C1D60-A13C-4479-9B91-9E8B9D835CDC&displaylang=en

  For more information, see this:

  http://support.Microsoft.com/kb/822798

  It will be useful.