Error Code 800706BE during installation of Windows Update

Similar Questions

• error code 80070020 ontrying installation on windows update kb968930. other updateas go through ok

  Windows Vista Home Basic tried microsoft fixit and this online does not help

  Hello

   
   
  What fixit from Microsoft online, have you tried and what error message did you receive?
  
   
  Follow these methods mentioned below and check.
  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode.
   
  Method 2: components reset Windows Update
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
   
  
  Method 3:   Try to install the update manually and check.
  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864
  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239
   
   
   
  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   

• error code 57 when executing that Windows update

  I get the error code 57 and the 8024200d error code when you try to run Windows update

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  If it's office updates maybe try to install office with the installation media updates in the installation drive.

• Error code 8E5E0147, impossible to get Windows Update to work

  When I try to download windows updates I get the following error code: "8e5e0147" and none of the updates will be installed. I now like 15 important updates.

  I already searched this forum and other forums of solutions, but none of those I've tried seems to fix the problem. That's what I tried:

  • Disabled Antivirus and firewall software
  • Tried to install updates and
  • Manually install the updates by microsoft download. This give me an error code, just "failed to install".
  • Run a checkdisk, no errors.
  I would be really happy for more information, which will solve this problem for me. It is very annoying. It is the system that I use if that would be any help:
  HP Pavilion dv 7 laptop
  Windows 7 Edition Home Premium x 64
  Intel Core i7

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  5 reset IE8 settings advanced by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings [trust me]

  6. open IE8 32 bit (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  7 restart once again & test.

  Note: Make sure you can update MSE manually. If you can not, you have a bigger problem on your hands.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 8E5E0147 for installation of windows security updates

  Hello. I noticed that no new updates have been installed on my computer (with the exception of all updates for Windows Defender but also the recent Microsoft .NET Framework Service Pack 1 and the .NET Framework family updates). Everything else, like security updates, have failed since January 13, 2009. I saw someone else who has had this problem for 9 months. The error code is 8E5E0147. Wndows update download and try to install the updates. However, once completed, it says "failed". I worry because my computer is not updated for April fool virus. Can I get any help here? I heard people say that maybe I need to ask a Windows installation CD.

  Thank you, Martin. The thing is that my .NET and service packs would have to install. Don't forget that my problem was not downloaded from the update, but the installation. I think I found the answer. My Norton Internet security and Antivirus had expired. When I got Windows security updates, I had no program to receive these updates. I renewed my subscription, and everything worked. It has not been easy. However. I had to keep doing updates on Norton security until I received the message "no new updates were found" after that, I got all the new definitions and update of WIndows was allowed to install thanks to the new KB for your help.

• Error code 80070057 during installation of updates on Vista

  Hello
  I had the same error code Joe980 and janette gale while trying to install 'Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 86'. I followed the instructions of Martin but as janette, I received a message during the analysis of the system indicating that he had found the corruption that could not be repaired. Then, I continued to step 6 and now have two log files on my desk. The file SFCRESULTS is empty and the CHECKSUR has the following text:

  Preparation of control system was updated.
  Version 6.0.6001.22275
  2009-08-11 12:08

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.

  Verification of the packets.

  Control components store

  Checking SMI Store
  Summary:
  Milliseconds: 973807
  No error detected

  I don't know what to do to solve this problem and so to install the updates.

  Thank you

  Hello

  To resolve this problem, you must clear the existing proxy settings by performing the following steps:

  1. open the start menu, select run, type cmd and press ENTER.
  2. to display the current, proxy settings, at the command prompt, type Proxycfg.exe, and then press ENTER to run the command.
  3. to clear the existing proxy settings, type Proxycfg-d, and then press ENTER.
  4. Finally, ensure that the Background Intelligent Transfer Service is running on the computer by following these steps:
  1. open the start menu, select run, type Services.msc and press ENTER.
  2. scroll through the Services window and double-click on Background Intelligent Transfer Service.
  3. If the service does not, on the general tab, click the Start button.
  5 re-run the update of Windows Vista on the PC.

  Good luck!

• second request: error code 643 on installation on windows 7 Professional - update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688)

  Can someone help me with this, I found answers with this error only on vista

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6c7bfc4d-b5de-4ff7-84a2-34a17154473e] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 80070490 during installation KB978342

  Original title: ERROR DOWN LOAD UPDATE

  I get the error code 80070490 after trying to install the update of KB978342 security, could help with this you problem? seems to down load all the other updates ok I have vista Home premium, service Pack 2, 32-bit

  Don't know what you're updating trying to install as I couldn't find it.

  With regard to your error.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error code 652 on Vista sp2 windows update

  I get repeated error codes 652 on my computer laptop sp2 from Vista when I try to update windows. Problem just started this week with KB2416473, an update of safety for microsoft.NET framework. I have Registry Easy and tried to scan and clean registry, but this did not help. Can someone help me?

  Please use the backups created by "Registry Easy" to restore the registry information that he deleted. And to see what the users of it have to say, please read their comments here -http://www.mywot.com/en/scorecard/registryeasy.com

  If you don't know how to modify the registry manually and then using a registry editor to do is similar to the delivery of a firearm loaded at a 4 year old child.
  Bad editing the registry by a registry to suspect "cleaner" can make the system unusable and cause a no start. Your only recourse at this point is a clean reinstall of Vista.

  1. download and Save the .NET Framework installation check tool
  2. read the Guide to the user on the page above and to check the installation of .NET Framework 3.5 SP1 by tool
  3. If it cannot be verified as being correctly installed, try to run a repair of programs and features.
  Locate the .NET Framework 3.5 SP1, click once to highlight, and then click the uninstall/change link and choose the repair option.
  4. If a repair operation has not resolved the improper installation of .NET Framework 3.5 SP1, then Uninstall it.
  5. download and Save full .NET Framework 3.5 SP1 package-
  http://download.Microsoft.com/download/2/0/e/20e90413-712f-438C-988e-fdaa79a8ac3d/dotnetfx35.exe
  6 configure Vista to the boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  7 reboot the system for the State of clean boot and disconnect the internet connection system that's for now.
  8. run dotnetfx35.exe by right clicking it and choosing "run as Administrator". Accept the UAC prompt to allow it to run high.
  9. once .NET Framework 3.5 SP1 is installed, cancel the clean boot procedure, and then restart the system.
  10. once the system has recovered to the normal mode of Windows, reconnect the system to its internet connection.
  Allow all updates to install now.

  If do what above has not resolved the installation of KB2416473, then contact Microsoft for assistance in getting it installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Expert MowGreen Windows IT Pro - consumer safety

• error code 80070570 during installation KB2705219

  Impossible to find a solution fo update error code 80070570 when you try to install KB2705219. I have windows vista 32 bit. Have you had recurrent problems of this type of update and you'd be grateful for any help.

  Hi RogerToebe,

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• I get a 0xD0000006 error code when tring to use windows update

  I get a 0xD0000006 error Code when you use the default of windows update Setup

  d0000006

  Code: Error_Invalid_Handle - a possibility - bad hard drive

  Maybe a problem with a hard disk - important files may appear on the bad blocks.

  Try to run the "chkdsk/r" command at the command prompt

  You must open the command prompt by typing "cmd" in the start menu-> Run

  TaurArian [MVP] 2005-2010 - Update Services

• Help with error Code 8024D00E! Improperly installed Windows Update?

  Update for Vista 64-bit Windows does not allow me to install the updates, and it does not seek to new updates. Error code 8024D00E keeps popping up, and without WU works correctly, I can't use my Zune software. Help?

  3-hours-late duplicate of http://answers.microsoft.com/thread/af5f3930-3814-48cc-bb3b-7cfcc6bc37b1

• Getting error code 2146827859 when you use Windows Update

  Running XP64 Pro.  Windows Update > Message that IE32 must be open > process then runs receive error box showing "error code 2146827859 reinstalled IE8 (64) - but this has not fixed an error message."

  Hello

  The equivalent of 2146827859 is 0x800A01AD error code.

  Perrform no the link mentioned below and see if it helps.

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

  Note: "Check the title that reads" 0x800A01AD error code '

  Hope this information helps.

• Error code 643 trying to install Windows updates

  Initial problems of title-update

  I get a code of 643 error when trying to install windows updates.updates are not configured properly, go back to changes.and gets stuck on this page for hours

  Darlene

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

  UTC/GMT is 17:42 Monday, November 26, 2012

• How to tackle with error code 80004002 when I use Windows Update?

  A message tells me that Windows Update was unable to update my computer.  I go to Windows Update and I get the error code mentioned in my question.  This code is not listed in the possible remedies.

  Hello

  Method 1:

  Run the Microsoft fixit from the link below.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  
  Method 2:

  Follow the steps from the link below.

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  http://support.Microsoft.com/kb/956708

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7