error code 80072F8F - synchronization of clocks on the internet

Similar Questions

• Error code - 0x80070426 unable to connect to the internet

  I have a desktop HP with Windows 7 OS.  Also have a laptop Toshiba Satellite with Vista.  Around the same time, the two had problems and showed Security Essentials needed updated.  However, neither able to connect to the internet.  In collaboration with the Office of HP with Windows 7, the error code 0x80070426, appeared.  Any advice is welcome.  Thank you.

  Hi Baker1Source,

  (1) this only happens when you try to update Microsoft Security Essentials?

  (2) have you tried to access a website to test the network connectivity?

  (3) what is the complete error message you receive?

  Method 1: You can run the network troubleshooter utility and then check

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If the question is limited to Microsoft Security Essentials; You can post your query on the Microsoft Security Essentials Forums.

  Microsoft Security Essentials Forums
  http://answers.Microsoft.com/en-us/protect/Forum/protect_updating

• Impossible to install the KB2744842 update, get 80072EE2 error code and have problems connecting to the Internet

  Original title: 80072EE2 and KB2744842

  Tried to install update Cumulative security for IE 9 for Windows Vista for x 64-based systems (KB2744842).
  The installation failed, and now the internet connectivity is corrupt.

  Errir received message is 80072EE2.

  Tried several reboots, power/power on the router, ISP shows works, but cannot connect to the internet.

  Help, please!  And what happened to the phone support for Windows Update problems?

  Hello

  1 did you do changes on the computer before the show?

  2. do you receive error messages about the inability to connect to the internet?

   

  Work with the question about the installation of update KB2744842.

  Method 1:

  See the site:

  Windows Update error 80072ee2

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Install the update manually to the clean boot

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 in the article to set your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Step 2:

  Download manually on the site:

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2744842)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=34732

  Addressing the issue with the help of an internet connection:

  Method 3:

  See the site:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  You can also consult the site:

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  You can visit the hotline:

  Microsoft Technical Support phone numbers

  http://support.Microsoft.com/kb/319726

• I have the error code: 80072f8f on my lap, please help

  I have the error code: 80072f8f on my lap, please help

  Please see this thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072f8f/945f3ec1-8bac-4c10-A54E-1e564d18c37e >

  UTC/GMT is 08:08 Tuesday, November 1, 2011

• Windows7 ultimate was not updated and get the error code: 80072F8F

  Error code: 80072F8F

  See...

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072F8F 
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 - error Code: 80072F8F

  I have the Windows 7, 64-bit machine and get error code 80072f8f for about a month now.  I tried the fixes recommended in aid and in other places without result.  I run Eset for my firewall and antivirus/spyware detection system.  The PC was purchased new with Windows 7 Premium home edition on it and so far in early August of this year, updates worked well.  I would appreciate any other suggestions, that someone might have.  Thank you, jdmtkr

  The machine was purchased with ESET on it and update worked well until August when it stopped working.  I returned to advanced on ESET settings and off the SSL filtering that solved the problem.  Once I stopped to have ESET filter SSL, Windows update immediately started working.  I got the set program to request exclusions for various SSL filtering problems and I think one of my kids has a message in August when they used the PC and instead click on Yes to accept, they clicked on exclude who killed the ability for Windows Update launch.  Why there was a clock error is unknown, but the machine is now updated again.

• Vista - Error Code: 80072F8F

  I'm having trouble installing windows updates.  I get Code 80072f8f.  I have reset the clock on my computer and I'm still not able to get updates.  I also get errors certificate when I go to various websites.  I use the 32-bit version of Vista service pack 2

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~~~~

  You may encounter temporary connection [e.g. 0x80072F8F] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista, windows update error Code 80072F8F

  I get the error code 80072f8f. I searched the forums of discussion for something that will help, but nothing helped. I also lost the ability to use the system restore. I checked my timestamp in windows and it shows the date and time correctly. I even went into my bios to make sure that my system time was correct. Both are. I went to this Web page http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10acefdc-297f-4d14-9f5c-5a90250a8b8c and followed the instructions but had no luck either.

  I don't know if system restore is a symptom of the same problem or one of its own. I ran into this problem when I tried to install a netgear 311t wireless network card. I have since deleted from the card and uninstalled the software, I don't know if the map was part of the question, but I noticed when I tried windows update in order to get a driver for the card. I am running Windows vista Home premium 32-bit on a Pentium D 3.00 ghz with 3.5 g of ram. Any help would be great. Thank you.

  Chris

  I was afraid you might say that!

  OPTION 1: Contact the Symantec Support.

  OPTION 2: Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool (new) before installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (e.g., SAV, Microsoft Security Essentials - free).

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 80072f8f

  Hey guys, on my lower right, where the thing 'solve pc problems' is... I have 2 questions is - windows couldnot check for updates automaticalle. -and then the second is - undeclared verification of the solutions to the problems. -When I click on windows couldnot automatically check updates, it gives me the error code 80072f8f. need help... im confused that nothing works lol. thanx

  Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~~~~~~

  0x80072F8F error code when you try to search the updates available on the Windows Update and Microsoft Update sites
  http://support.Microsoft.com/kb/929458

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

  How to reset the Windows Update components?
  [Ignore the section to APPLY to, if a Win7 user;] Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 80072F8F while trying for dates up to windows

  Error code 80072F8F during an attempt for windows up to dates

  Hi Babulalmeena,

  Try the steps from the link given below which describes the same error code.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F
  http://support.Microsoft.com/kb/929458

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I get this error code 80070020 when trying to update the KB3035132

  * Original title: HELP

  I get this error code 80070020 when trying to update the KB3035132, I did all the suggestions and get the same thing.

  What to do from here

  http://Windows.Microsoft.com/en-AU/Windows/Windows-Update-Error-80070020#1TC=Windows-Vista
  If you receive Error 80070020 Windows Update, this could mean a program running on your computer is interfering with Windows Update. It is often a simple synchronization problem, and it can be solved by restarting your computer and then run Windows Update again.
  See also: http://support2.microsoft.com/kb/883825

• Error Code 80072f8f: windows update fails. Outlook2010 auto config account Exchange 2013 fails 'no available encrypted connection '.

  The user's mobile final has all of a sudden a problem. Windows 7 Pro.

  Disconnects account Exchange 2013 in Outlook2010 cannot connect......

  .. Windows Update fails with error Code 80072f8f... A cert security problem?

  ----

  The user did issue out-of-the-blue (update) about self-configuring. I don't know how he responded.

  So we see that Outlook cannot connect to the Exchange Server... error codes include:

  "There is a problem with the proxy server's security certificate"

  "Outlook cannot connect to the server proxy [rackspace] mex06.emailsrvr.com".

  (Error code 080000000) »

  .. Thus, there seems to be a problem with the security on this computer certificates.

  I have no idea where to start to fix this...

  Rackspace, bravely suggested that I remove the mail profile and create a new...

  The create new e-mail account (exchange 2013) breaks down... same error...

  All hosted no more thoughts.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to the Microsoft Help Article below and check if that helps.

  As you've found Windows Update fails with error Code 80072f8f.
  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80072F8F#1TC=Windows-7

  You can also check out the article below.

  https://social.technet.microsoft.com/Forums/office/en-US/0b7ebeab-ca31-4379-a489-16fdad34d550/intermittent-proxy-error-there-is-a-problem-with-the-proxy-servers-security-certificate-outlook?forum=exchangesvrclients

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• How do I Fix error code 43 CD. Windows disconnected the disk do not know how to reconnect.

  My Pavilion g7us Notebook Pcs Cd-Rom Drive showed a 43 error code and my computer has disconnected the Cd-Rom drive, and he said: it will not reinstall because there is a problem with the drive, how to fix my cd-rom so that I can start my backups and use my Dvd Player and burner.

  In addition, depending on the operating system, try following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• I get an error code 646 while trying to download the updates

  I get an error code 646 while trying to download the updates, update security for Microsoft Works 9 (KB2431831)

  Download size: 2.1 MB

  Help, please

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47