Error Code Confusion

Similar Questions

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• Error code 23 Bulletin Board.

  Hello

  I've problem with display error code compare 23 and doesn't work. When I press right button display error! I can't use the feature on this feature, it is locked.

  Who can help me? Please, I beg you!

  Thank you very much!

  Hey Buddy,

  It seems that something has confused your display software and if you get an error code and it s not in use.

  Simple reinstallation of the program should help get rid me of this. Simply visit the Web from Toshiba site and looking for the latest version. Download and install it then your bulletin board software should work again as usual. :)

• Repeated (-4 and -43-54) error codes

  Hello. I suddenly have real problems with my Mac (iMac desktop into 2007, El Capitan 10.11.12 running version). It is possible that this has happened after upgrade to El Capitan as well that I've updated several weeks ago, that I have not used it much in the meantime.

  The first thing I noticed is that when you try to synchronize and back up my phone (a 5s iPhone I had for centuries and still been able to sync properly - running 9.1) it returns an error message saying "failed to attempt to copy to the disk Macintosh HD." An unknown error occurred (-54). I had a quick search on here and found a few suggestions - restart the computer, restart in safe mode, remove the version of the iTunes library file .xml, try first aid in disk utility, check the permissions - all to nothing does not.

  A few days later I tried again hoping it might just have it fixed itself, but unfortunately it didn't. The same error message is coming, but this time the unknown error is - 4 and non - 54.

  I also noticed that when I try to delete all of my files - documents, photos, either - I now get a different error message: "this operation cannot be completed because one or more required items be found.» (Error code - 43) ». I can open one of these files without a problem, but do not occur just to delete.

  I am really confused and have absolutely no idea how to solve this. I'm quite concerned so any help would be greatly appreciated!

  Please connect to the iTunes Store, and if you use iBooks, iBooks store as well. If you use iCloud, connect to that, too. Then log out of your account in OS X or restart the computer. Test.

  If the error persists, you may need to select

  Parameters ▹ ▹ General Reset ▹ Reset all settings

  on the mobile device.

• Simple Handler.vi error ignores the error code?

  I'm trying to understand the behavior of Simple Error Handler.vi, and it confuses me because it seems not be properly error code I give.

  According to the documentation, if I have an error code, then:

  If error in indicates an error, the VI ignores the error code. If this is not the case, the VI it tests. A nonzero value means a mistake.

  But my observation is that when the error indicates an error, the VI always shows a dialog even when given an error code. Instead, I use the Handler.vi to General error and providing an exception action (cancel error on match) and an exception code to get the behavior I want.

  What am I misunderstanding?

  

  

  MacNorth wrote:

  I'm trying to understand the behavior of Simple Error Handler.vi, and it confuses me because it seems not be properly error code I give.

  According to the documentation, if I have an error code, then:

  If error in indicates an error, the VI ignores the error code. If this is not the case, the VI it tests. A nonzero value means a mistake.

  But my observation is that when the error indicates an error, the VI always shows a dialog even when given an error code.

  There are two ways of interpreting unaware them in the sentence: "If the error indicates an error, ignore them error codeVI."

  1. (the intention) If the error indicates an error, the VI does not use the error code.
  
  
  2. (my point) If the error indicates an error, the VI deletes all corresponding to the error code.

• OfficeJet 6500 E709n: Error Code 4, [(3,14,0)}]

  I recently updated my Dell computer, but I'm still using Windows 7.  When I try to scan using my OfficeJet 6500 I get an error message immediately: "problem of access to files and resources on the computer.  Try the following steps.  After each step, try to scan the image: - restart the computer - reinstall the HP Photosmart software supplied with the camera, error code 4, [(3,14,0)}.] »

  I followed these steps several times but also reinstalled the whole full functionality of the software and the driver OJ6500vE709_Full_14.    I also installed Photosmart Essential 3.5, although I do not think that he should never before scanning.

  I uninstalled all associated HP OfficeJet 6500 products and reinstalled everything.

  When I used HP Print and Scan doctor to help out, everything seems to work properly.  I was finally able to scan a document ('test analysis') while the 11 steps of printing HP and doctor Scan.  Hiowever, as soon as I tried to use the HP Solution Center application to scan a document, the same error messages came.

  I am confused at this point, given that the doctor of the scanner helped me successfully to a test analysis using the normal HP Solution Center to do the same thing is not.

  Thanks for any help!

  I just re-read one of the earlier posts about a similar problem and noted the suggestion of the Expert HP to run CCleaner in the framework to get the software cleaned.  I just (belatedly) followed that advice and voila!  Everything works fine!

  Thanks for the earlier solution that helped me solve my problem.

• VISA IC returns the 0xBFFF003A error code when reading the USBTMC device

  Hello

  I'm creating a USBTMC device and have some difficulty to determine why a viRead returns the 0xBFFF003A error code. Strangely enough, it reports also to read the correct byte number and the buffer contains the correct data. I use VISA IC 5.1.2 but I had the same problem with version 5.0.3. I have no problem with the device recognized by VISA IC, MAX, LabVIEW SignalExpress or LabVIEW. Using the previous version of VISA IC performing an async read would return a code completion, 0x3FFF009B (VI_SUCCESS_SYNC).

  The attachment of the utility Trace all communications from e/s or watch for when the USB cable is plugged into the computer.

  Lines 1-18 LabVIEW SignalExpress 2011 has begun

  Lines 19-35 VISA IC: open the selection

  Line 36 VISA IC: claire

  Line 37 VISA IC: Read - 10 characters

  Line 38 VISA IC: Read - 21 characters

  Lines 39-44 LabVIEW: open, read 21 characters

  Line 45 VISA IC: Read - 18 characters

  Line 46 VISA IC: claire

  Line 47 VISA IC: Read - 18 characters

  Line 48 VISA IC: closed

  Note: LabVIEW crashed on line 44.  At the moment I know not whether that is related to this problem or not.

  Full error description: failed to start the read operation because the installer is not valid (because of attributes defined in an inconsistent state).

  I'm confused by why it says it cannot start operation when in fact, it returns the requested data and attributes that it refers to? I reviewed the USB descriptor values that I use, and they look correct to me.

  Any ideas?

  Thank you

  Hi Perry,

  I found the problem.  The TransferSize didn't get converted from big-endian to little endian and 0x0A was considered 0xA000000.

  See you soon,.

  Airaki

• Error code Win32 returned by the print processor: 2147500037. Unspecified error

  I see that this error code has been resolved.   I have a few questions on this topic tho.  Loop here, is where the fun begins.  If i see this exact problem in my hosted cloud envorioment.  The printers are installed locally and are drawn on the network when the user logs in the hosted environment. The user connecting to a full desktop, which is a Windows 2008 R2 server server.  They only receive this problem when printing via the cloud. that uses the same printer drivers installed on the local PC.  On-site printing has the success rate of 100%.

  Here are the mistakes I see:

  Https://rem.exactbid.com/ServiceRequest/SRFsmart/srprintable.as, belonged to craig_REM, document failed to print on printer HP LaserJet P2050 Series PCL6 (from CRAIG) in session 18. Try printing the document again, or restart the print spooler.

  Data type: NT EMF 1,008. Spool file size in bytes: 589824. Number of bytes printed: 540384. Total number of pages in the document: 2. number of pages printed: 0. Client computer: \\VS-XA35. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  Where I am confused, is that I have no driver installed on the server.  they are all drawn in front of the user login local machine solange.  With printing works fine locally.  Uninstalling the drivers will make them any good?  or where should I be looking next?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Serverforum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• dll from System 32 error code (0 x 300000030)

  dll from System 32 error code (0 x 300000030)

  First of all, if you have gone through your windows folder, you might be familiar with the name of the system32 folder. This is a very important issue and part of your operating system without which your system may not work at all. Some consider it as the brains of the operation because it contains many dll files in what is active and runing in every process of your system. As it is an important part of your operation, I want to tell you to keep away from this folder and never delete or change anything. It's all about your system 32 folder located in your windows folder. This has nothing to do with system32.dll.

  System32.dll is a Trojan called harnig. Harnig Trojan isn't part of your operating system and is a very harmful infected file that will give all your information navigation to advertisers and sponsors. It can also result in loss of data and information from your system. The developer of this Trojan must were smart by naming "system32" to confuse people because the experts always fear users to stay away from the system32 folder.

  Now that you know the difference, you do not necessarily have to deal with these problems by yourself. But if you have a missing dll file or a file that is corrupted in your system 32 folder, you can try some easy stuff for yourself. First of all, you can try the system restore to an earlier date which is a good way to fix many problems by taking your computer to the date of the last when your operating system have saved all of your settings. You can easily do this by restarting your computer. Once the computer stops and tries to start again you must press f8 until you see the black screen with options and then select 'safe mode' and choose the option to start windows system restore. If this does not work, you can try another way by the same procedure that is, restart your computer and press F8, but instead select "safe mode", select "Start using last good known Configuration".

  Now, all these things might or might not help you fix or replace your system32.dll files. But how can you be sure that there is a corrupt or a dll file missing in your system 32 folder? Because their could be a virus in your system 32 folder that is if other dll files. It could be something similar to the system32.dll file. You can easily solve the problem of virus system32.dll and another problem of dll with the help of a good registry cleaner that got all of the definitions and the dll files library.

• Windows 7 - error Code: 80200053 (impossible to install malicious software Removal Tool KB890830)

  error code 80200053-cant install update KB890830.  Win 7 64 bit

  Q: has your subscription expired Norton NEVER
  R: Yes

  Q: has the free trial period pre-installed Norton already expired by the time where you purchased your subscription to Norton OR replaced NIS by Iolo System [Shield]?
  R: Yes

  You see the effects of a hijackware infection! I guaranteed the application of Iolo was NOT installing correctly & does not work properly. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: because you upgraded to Win7 Vista, you will need to do a clean install of Vista. Once you get Vista fully patched & SP1 is installed, you will be able to switch to Win7 again.

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery")... unless you wiped out the hidden partition when you upgraded to Win7.

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton Removal Tool before installing updates, Windows Service Packs or IE upgrades AND BEFORE installing your new antivirus application (for example,Microsoft Security Essentials -free).

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista, windows update error Code 80072F8F

  I get the error code 80072f8f. I searched the forums of discussion for something that will help, but nothing helped. I also lost the ability to use the system restore. I checked my timestamp in windows and it shows the date and time correctly. I even went into my bios to make sure that my system time was correct. Both are. I went to this Web page http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10acefdc-297f-4d14-9f5c-5a90250a8b8c and followed the instructions but had no luck either.

  I don't know if system restore is a symptom of the same problem or one of its own. I ran into this problem when I tried to install a netgear 311t wireless network card. I have since deleted from the card and uninstalled the software, I don't know if the map was part of the question, but I noticed when I tried windows update in order to get a driver for the card. I am running Windows vista Home premium 32-bit on a Pentium D 3.00 ghz with 3.5 g of ram. Any help would be great. Thank you.

  Chris

  I was afraid you might say that!

  OPTION 1: Contact the Symantec Support.

  OPTION 2: Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool (new) before installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (e.g., SAV, Microsoft Security Essentials - free).

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 80072f8f

  Hey guys, on my lower right, where the thing 'solve pc problems' is... I have 2 questions is - windows couldnot check for updates automaticalle. -and then the second is - undeclared verification of the solutions to the problems. -When I click on windows couldnot automatically check updates, it gives me the error code 80072f8f. need help... im confused that nothing works lol. thanx

  Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~~~~~~

  0x80072F8F error code when you try to search the updates available on the Windows Update and Microsoft Update sites
  http://support.Microsoft.com/kb/929458

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

  How to reset the Windows Update components?
  [Ignore the section to APPLY to, if a Win7 user;] Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error code 0 x 80080008 attachment

  I was on the net and found a way to fix this error code manually but I have to go back to a restore point that would take over my laptop at a time before that I did all the updates, so that would mean that I would lose all these updates would be his confused me, oh help sorry to be a pest , but I'm trying to solve problems myself it took me 3 days almost to get to this point

  That concern the same used Windows XP computer as in your first thread? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/how-to-identify-and-copy-a-genuine-windows-xp-pro/e9e02c94-63f3-41d1-8484-601187b09255

• error code ox80070005 for s/p3 office. Failed 3 times but still exhausted my data allowance

  running windows xp home edition (sp3) I have tried 3 times to install office 2007 sp3 without success, yet every time 275 MB of my data allowance was "eaten". As I'm only authorized a pox 1 GB per month, this situation plays havoc with my blood pressure. Ox80070005 error code is reported. Is this a known issue with an easy remedy?

  confused 1.2

  Download and save the Setup file of Service Pack 3 for Office 2007 in normal mode.
  Once you have downloaded the file and saved on the system, then boot the system in clean boot mode and try to install service pack 3 and check.
  Service pack 3 does not figure in the automatic updates or if you are trying to download the file and then try to install it?
  Open any Office application and check if service pack 3 is already installed.
  For example, open Word, click file< help="" and="" check="" if="" service="" pack="" 3="" is="" installed.="">

• Update failure KB263371 (error code 800700008)

  original title: update failure KB263371

  MS Security Update for Windows XP KB263371 error Code: 0 x 80070008 - continues to fail and try to update. Free of virus. No new software.

  No new anivirus (AVG, Spybot) - I ran Windows Defender, MS doesn't Fix It. So far, nothing worked.

  I see other forums, it is not unique, but so far have not seen a solution. Appers have started 12/13

  Additional - I had to do an XP repair and updating on 11/13.

  So what's the ONLY update that won't install successfully?

  @jstut only! =>

  Two possibilities:

  1. do not uninstall IE8 or IE7 before doing the repair facility has left Windows in a "confused" State or "broken".

  2. you see the effects of a long-standing infection hijackware, very probably aggravated by a rootkit W32/Alureon-Variant.

  Repost...

  Your ONLY recourse now is to format the hard disk and then perform a new installation of Windows.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.