Error code drivers adapter 31 - not allowing a network installation

Similar Questions

• When you use Device.device.os, it throws error #1079: native methods are not allowed in the loaded code.

  Hi all

  When I tried to use the Device.device.OS to get the string from the bone. It is compiled smoothly. But it throws error when the application started on my desk.

  Error #1079: Native methods are not allowed in the loaded code.

  It does not error in the emulator, but he did not get the chain of the OS.

  Someone knows how to use the device class? Is it still not currently supported?

  Thank you very much!

  Error #1079: Native methods are not allowed in the loaded code.

  This error is thrown on the desktop because your qnx - air.swc is probably in the process of fusion as code instead of being tied to your project as external. The reason who need to be external is that it contains classes that exist in the execution of AIR in the Simulator and not in the AIR runtime on your desktop. The device classes use the custom air extensions we wrote to get the properties of the device.

  If you want just the operating system, you can also use the Capabilities.os, which is a standard API Flash Player and does not require the use of custom extensions.

  My guess on why it does not work on the device thus is that the qnx - air.swc is not defined externally. Return to externally set and run it in the Simulator.

  Hope that helps

  Julian

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• Basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.

  Original title: * e-mail address is removed from the privacy *.

  To try to save, basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.

  Hi Brad blair,.

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  Please check the error code that you provided as it seems to be incorrect.

  Follow the suggestions below for a possible solution:

  Method 1: You can try to perform the backup on a different DVD and check if it works.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  You can also see the following article for more information on the backup:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Let us know the results.

• error code 80080005 'Windows could not search for new updates"

  error code 80080005 'Windows could not search for new updates"

  What operating system?

  http://support.Microsoft.com/kb/910337
  This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then click OK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and click OK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  TaurArian [MVP] 2005-2010 - Update Services

• error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

  error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

  Hi vivasiousv,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  See the links in the Apple Web site and try the steps mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=6096760

  http://discussions.Apple.com/message.jspa?MessageID=8436848

  For additional support post your query in the Apple discussion.

  http://discussions.Apple.com/category.jspa?categoryID=150

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error creating - snapshot operation is not allowed in the current state

  Hi all

  Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

  Error creating - snapshot operation is not allowed in the current state

  The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

  I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

  I contacted the Veeam Support before posting here.

  Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

  Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

  Thanks for helping me on this.

  Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
  You will not be able to do replication when you use this passtrough.

  Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

  After that you can delete the passtrough of your SBS and your replication will work.

  Sorry

  Concerning

  Simon

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• Error 28000 (licensing module does not have) on the installation of Acrobat DC.

  I receive the error 28000 (licensing module does not have) on the installation of Acrobat DC. The installation is on a new computer Windows 10 Pro. Installation was attempted at the start using Dell's digital delivery program, but have also tried installing after downloading directly from Adobe. I used the cleaning tool and tried to install it again with the same result. I tried installing using the administrator account with all services non - Microsoft Startup and antivirus disabled and received the same error message. I restored the system to a point before the initial setup attempt was made and tried to install it again and received the same error.

  Hi jeffreym27466292,

  You can refer to another thread on the same question and try the steps.

  Error 28000. Installation of the Module of licensing Acrobat failed?

  Let me know how it goes.

  Concerning

  Sarojini

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• trigger error autnomous mutation! Why not allow select in the trigger body?

  case 1. a user updates the table and this user has not committed, even fire user select request, he would get an old result. but no error.
  
  case 2. We have table x, trigger appears on the table x as soon as the table is updated to trigger fires. inside the body that we select just for table 'x' it throws error error changing table
  can someone please explain why?
  
  my example as follows:
  case 1:
  CREATE TABLE MyTable
  (NUMBER of c1);
  
  INSERT INTO myTable VALUES (1);
  commit;
  INSERT INTO myTable VALUES (2);
  
  Select * from myTable;
  C1
  ------------
  1
  
  
  
  
  case 2:
  CREATE TABLE myMaxTable
  (maxValue NUMBER);
  
  CREATE TABLE MyTable
  (NUMBER of c1);
  
  INSERT INTO myMaxTable VALUES (NULL);
  COMMIT;
  
  CREATE OR REPLACE TRIGGER myTrigger
  AFTER ON INSERT myTable
  FOR EACH LINE
  BEGIN
  UPDATE myMaxTable
  SET maxValue = (SELECT MAX (c1) FROM MaTable);
  END;
  /
  INSERT INTO myTable VALUES (1);
  
  INSERT INTO myTable VALUES (1)
  *
  ERROR on line 1:
  ORA-04091: table HUNBUG. MYTABLE is changing, function of triggering/can not see
  ORA-06512: at "HUNBUG. MON_TRIGGER', line 2
  ORA-04088: error during execution of trigger ' HUNBUG. MYTRIGGER'

  Assume that you are doing something like this:
  You have three records in the table:

  INSERT INTO myTable VALUES (1);
  
  INSERT INTO myTable VALUES (2);
  
  INSERT INTO myTable VALUES (3);
  

  Then do you one insert call to do more than three:

  INSERT INTO myTable
  SELECT c1 + 100
  FROM myTable;
  

  This last call insert inserts 3 records in your table - 101, 102 and 103.

  When you have a trigger FOR EACH ROW, which will be called three times, but there is no way to predict in what order, and when the trigger will fire for example at c1 = 102, the table is the "mutation" - it is located in the heart of a change and you don't know if 101 or 103 or both is in the table. Oracle does not allow you to do a select on the table of this mutation.

  When you remove the FOR EACH ROW clause, the trigger only will be called once at the end of this call to insert, moment in which the table is no longer changing and so your code will be located safely c1 max.

• When I am using firebug how to enable editing of css source code? I can use the 'Search' menu edit option but may not change the code. It will not allow that.

  I'm not allowed to modify the source code of my css. I can open a css file
  and see all the code but when I try to change the text, it
  won't do it. I thought I could edit text to update the css files. How do I do that?

  If your intention is to download the file changed on the server, then you must use an external editor.
  
  Otherwise, you can watch an extension as a Web Developer.

  • Web Developer: https://addons.mozilla.org/firefox/addon/web-developer/

• Error code 5005 Keithley 2602 not detected

  Hello

  I use the Keithley 2602 A meter/source in labVIEW2011.

  An error code 5005 product (wholesale value) on the display.

  This error is not detected by the driver.

  In the pilot of the world ErrorQuery maintains False even if an error occurs.

  If I put the case true manually then the error is read back form the instrument.

  I have attached the pilot where the problem occurs.

  Why it is not detected by the driver?

  Kind regards

  Bernard arts

  Hello

  I'found the problem. To initialize the global error query must have the value true otherwise, no errors are detected (playing the instrument).

  The error occurs on the screen of the instrument (if I can see that an error occurs), but it was not detected by the sub vi because to initialize the query of error set to false (the default).

  Kind regards

  Bernard arts

• XP home 32-bit sp3 did not finish download, error code 0x8007007B sp3 has not completed KB936929

  Download stops at halfway through, copy the BEETHOVEN WMA 9866fb57abdc0ea2f5d4e132d055ba4e error I was given this DIMENSION 9100 as a gift by a friend who went mac, (not so sure a gift). Last used 2005, took off from Norton not replaced by McAFEE, no problem with passing, no problem with the sp3 updates just. Read Q and a, is a commentary on the Member CARRINGTON 0212 surgests error code 9866fb57abdc0ea2f5d4e132d055ba4e is a smss.exe (whatever it is) and could possibly be malicious masquerading as a legitimate file (as I understood) and should be in the C drive, so to this end, I checked the C drive and it reads : c:/i386 c:/i386 System 32 smss smss smss c:/windows/system 32 smss c:/windows/software distri... Any help with this would be greatly appreciated, but please keep in mind that I'm not the fastest chip on the motherboard, it would be SSIMEP to say that I would need instructions on how to get a newspaper, so keep it simple please. Thank you very much

  Should be formatted and started clean when you got it.  Should probably be done now after you backup the stuff you want.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Error code 646: I could not successfully install an upgrade (upgrade of security for WORD 9, # KB2092914)

  Since 12/08/10 I could not successfully install an upgrade (update of security for WORD 9, # KB2092914.) Six times I haveEncountered Unknown Error Code 646. Any suggestions? I have Windows 7.  Thanks you

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.