Error during device driver software installation blue screen

Similar Questions

• Microsoft ISATAP adapter #28 (device driver software installation problems)

  Hi all:

  Just started getting the following error when I start first in regard to Microsoft ISATAP adapter #28:

  Device driver software was not successfully installed

  Please consult the manufacturer of your device to help get this device installed.

  I'm totally familiar with this device and as a result, I'm not sure what relevance with regard to my OS.  What I need to download and install a special driver manually, or should I just ignore the error message above?  Care of my system:

  CPU:  Intel Core i7 - 4770 K CPU @ 3.50 GHz

  GPU:  EVGA GeForce GTX 770 (last WHQL Logo'd driver installed)

  RAM:  Corsair Vengeance DDR3 1866 MHz (running at 1600 MHz) DRAM Pro

  OS:  Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_ldr.160408 - 2045)

  Any help would be greatly appreciated.  Thanks in advance!

  Hello

  Peripheral Microsoft ISATAP Inter Site Automatic Tunneling Address Protocol is used to help the transition to an IPv6 infrastructure companies. T he card ISATAP encapsulates IPv6 packets using an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure.

  This means that the Microsoft ISATAP device driver is an update which is specifically designed to connect to the network. This driver is not a requirement for your operating system. It's an extra update for a better network functionality. If your internet connection works fine, then you can ignore this driver. Otherwise, follow the solution below to solve this problem.

  Here are the steps you can try:

  1. follow the steps on this link to update the driver: update a hardware driver that is not working properly.

  2. run the troubleshooting of autopilot: hardware devices do not work or are not detected in Windows.

  3 try to uninstall and reinstall the driver.

  To uninstall:

  1. Click Startand then click Control Panel.
  2. Click hardware and sound.
  3. Click on Device Manager.
  4. Double-click the type of device you want to uninstall.
  5. Right-click on the desired specific device, and then click Uninstall. You can also double-click on the device and then on the driver tab, click Uninstall.
  6. Click OK to complete the uninstall. (Restart your computer so that the changes take effect).

  To reinstall:

  1. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. In the left pane, click check for updates. If there are any available updates, click the links to see more information about each update. Windows Update tells you if an update is important, recommended, or optional. Each type of update might include drivers.
  3. On the Select the updates you want to install page, look for updates for your hardware devices, select the check box for each driver you want to install and then click OK. There could be no available driver updates.
  4. On the Windows Update page, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Windows Update will tell you if the updates have been installed correctly.

  Let us know how it goes.

  Thank you.

• Utility Intel chipset software installation blue screen

  Hi, I recently decided to install this utility but encountered a blue screen. I did all my files INF. Update tool, but when the installation reaches the Intel ICH9 Family USB2 Enhanced Host Controller - 293C the closed laptop - a blue screen with white text appeared. A USB composite device is connected to the host controller. I thought that this composite device may be causing the blue screen and tried to uninstall or disable it but sameblue screen apeared. Is there a problem with the Intel host controller or with the Chipset utility?

  I would be very grateful if solve you my problem!
  Some information on my PC:
  OS: Vista Home Basic (build in Service Pack 2)
  Chipset: Mobile Intel 4 Series Express Chipset with integrated graphics
  RAM: 2 GB

  Thanks for the report of BlueScreenView.

  Please replace the camera driver with a new copy on the Dell site.  There is no need to have a device without driver - as it will cause problems that elsewhere also.

  Once the drivers are replaced, if you still have problems BSOD - then we must suspect the camera itself (a hardware problem).

  But there are many other things for us to test before you leave us on the drivers.  FWIW - I had problems with this driver to work before, and I may have a few "tricks" up my sleeve because of this.

  Let us know if there are problems to obtain or install the drivers and I'll see what things are needed.

• We get an error "Device driver software has not been installed successfully" when installing Microsoft LifeCam HD-3000

  * Original title: does not always

  There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?

  Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.

  Hi Rachel,

  Thank you for your response.

  I suggest you to contact the Microsoft Hardware support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  It will be useful.

• Unable to boot to HARD drive or disc - blue screen Vista: 0 x 50 or 0x7E

  I can't start Vist from my drive hard or with the installation disc. Boot from the HARD drive gives a blue screen with the error 0x000007E code and boot from the drive allows me to launch the recovery program, but once I click NEXT for the first time, it goes to a blue screen with error code 0 x 0000050.

  I saw a lot of people have had these errors when the computer is running, however, I'm not able to start somehow, not even in safe mode, last known good configuration, etc.. I also tried to clear the CMOS with no luck.
  Any help would be appreciated.
  It starts very well when I got to work last night, but won't do a thing tonight.

  Hey Ross,

  Unplug all external devices (except keyboard and mouse) and check if it can boot up to the desktop in all modes.
  If this is not the case, contact the manufacturer of the system for more help.

• MS-DOS 16-bit subsystem. A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.

  (1) running the command

  16-bit MS-DOS subsystem
  ---------------------------
  C:\WINDOWS\system32\command.com
  A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.
  ---------------------------
  Ignore relatives
  (2) control ML
  When am usin masm611
  'ml' is not recognized as an internal or external, operable order
  program or a batch file.
  What am supposed to to make clear this error?

  Hi Pushku,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue while using masm611, here is a link that gives you steps to change the registry settings to resolve the issue:

  "16-bit MS-DOS subsystem" error message when you install a program

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  If you need further assistance, please answer and we will be happy to help you.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• MDR-ZX750BN - device driver software was not successfully installed

  Here my problem, I go to my bluetooth to add a device I turn my headset on "MDR-ZX750BN" it detects and so I add it starts to install the device drivers but then and I encounter the message "device driver software was installed correctly. Now, I tried to man to try and fix this problem, so I hope someone here can help know me fix the. I think it has something to do with the drivers not being do not or are not planned to install the good. I just need to know how to fix it. I'll be very grateful to anyone who can help me with this problem. Thank you.

  Hello Eric,

  Thanks for posting your query on Microsoft Community forum.

  When you connect a new device to your computer, Windows tries to install it for you automatically, and will notify you if a driver for the device is not found. There are several things you can try if this happens:

  I suggest you try the steps in the following article.

  What to do when a device is not installed correctly

  Get back to us with the result of the steps so that we can help you further.

  Kind regards.

• Error: Device driver software has been installed correctly

  I built a new desktop computer and installed Vista x 32 last summer.  I had no problems until recently, when I tried to plug in a flash drive a friend and Vista has problems to install the driver.  I received the message:

  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  USB mass storage device
  Not enough memory is available to process this command.

  I ended up plugging the flash drive on my laptop and transfer the files to my desktop on my home network.  The second problem occurred a few weeks later, when the internal memory card reader that I had installed has stopped working.  I thought it was a driver problem, so I uninstalled the device by using Device Manager and restarted my computer, thinking that the plug-and-play device should be automatically reinstalled.  Upon reboot, Vista tried to reinstall the device and ends with a similar message to what I had received for the flash player.

  I was determined to get my pictures on my computer so I plugged into an external USB card reader.  I received the same message when trying to install it.  Finally, I tried to plug directly into my Canon SD880IS, but again received the message.

  Does anyone know why Vista does not recognize one of these USB devices?  I tried a variety of USB ports on my computer without success and everything that I had already installed works always.  I'm not sure what the message is referring when he said "not enough memory is available to process this command."  I have 151 GB free on my disk system and 4 GB of memory installed.

  Thanks in advance!

  spritemv, do a SFC scan for me, let's see what are the results:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER: sfc/scannow
  4. When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Although your question could not be linked with protected system files, I check if you have any other corruptions on your system.
  It maybe your Windows Installation has picked up corruption over time by the program facilities.

  To continue:
  What happens when you start with a card inserted into your card reader, memory does make a difference of recognition?
  If it is a device that you have personally installed, you can check the OEM for any possible driver update, we can use?

  Check the status of the device and the driver Version:

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Double-click the category containing your device driver, and then double-click the device name.
  3. Check the status of the device under the driver tab click on general tab, check driver provide Date of the driver, the driver Version, digital signer. Please provide this information.
  4. Click OK, exit Device Manager.

  See if you can completely uninstall and reinstall your card reader who follows the steps, please check the categories for the time installed thumbdrive you mentioned to see if we can remove that as well:

  Uninstall the drivers of hidden devices:

  1. Click Start-> click all programs-> on Accessories-> right click on command prompt, select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. At the command prompt, type the following commands (press ENTER after each):
  3. SET DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  4. devmgmt.msc
  5. When in Device Manager, click view and then show hidden devices
  6. Expand the category that contains your device, and then double-click the name of your device.
  7. Click the driver tab and then click on uninstall.
  8. If there is remove the software this box of the device driver, check (make sure that you have an internet connection so that you can buy these drivers). Read and confirm notification, click OK.
  9. Quit Device Manager and restart your computer.
  10. You will be asked at new hardware detected. Select search and install the driver software. Check permissions. Windows will now search for the driver for your hardware and reinstall.
  11. Retest the device

  In regards to your iTunes message, see if the disassembly of the upper and lower filters apply to your situation:

  Delete upper and lower filters

  Click Start-> click on all programs-> on accessories-> click notebook.

  Copy the following commands, and then paste them into the opened Notepad window:

  Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\FiltersBackup.reg
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v

  On the file menu, click Save as, and then type DeleteFilters.cmd

  Click on save as type and select all files (*. *).

  Save the DeleteFilters.cmd file to your desktop.

  Right-click the DeleteFilters.cmd file, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  Try to install updates again.

  Notes

  After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom CD/DVD filter driver by double-clicking on the FiltersBackup.reg that the command script exports to your desktop. If the problem is resolved, delete the DeleteFilters.cmd file that you created.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the following error: Windows found driver software for your device, but encountered an error so as to install it.

  The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)

  Hi Mohan kumar,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:

   

  Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.

  http://support.Microsoft.com/kb/940267

   

  Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if that helps.

• Names of specific driver for the blue screen error Codes

  Hi all! Need your help please! Like so many others, I received Error Codes blue screen, that crash my system. I need to know the names of the specific drivers associated with these codes so that I can disable them (in accordance with the instructions of Windows), internet research has not helped. If anyone knows what are the names of the associated drivers or how to determine them it would be greatly appreciated! The error codes are:

  0x0000007E; 0XC0000005; 0X82D1F1C4; 0XF89EFB04; 0XF89EF800

  Thank you!

  Hi Anna K.

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  See also:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  Note The article above applies to Windows XP. However, you can follow the steps to solve the problem.

  If you don't have any service pack (SP) installed, please consult you may receive an error message "Stop 0x0000007E" after you enable the BitLocker Drive Encryption feature in Windows Vista

  In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

  See use SkyDrive download collected files and post screen shot/image

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• 2203 error on upgrade / install now the blue screen?

  I have an Acer i7 desktop, prof. win7, the 2 TB hd, ram 16 g.  About 8 months ago I started having problems to install the software/upgrades (first arrived on an installation of Office 10, FYI - I work a lot and don't get to spend much time on the computer or try to fix it).  I kept getting the error code 2203 partially through the upgrade / install - basically a mistake before (I'm logged on as administrator).  I tried the suggestions about to take possession of the temp file and giving me full control, but it did not always help.  Finally, I created a second Admin account to use and that seemed to help on upgrades facilities level.  However, now when I reboot I still have a blue error screen - the computer starts up fine and works fine, it is only on the process of closing during re-boots - it takes a long time to finally go to blue screen then to re - start.  My guess is that one of the improvements partial or incomplete corrupt the registry.  I think on the restoration comes from my original setup but are there any other options before making such a drastic step?  Thank you

  Hello

  The resulting 0x0000009F error code one of the following SYMPTOMS:

  ·         You have a Windows 7 computer that uses certain AMD USB South Bridge EHCI host controllers.

  ·         You connect a USB device to the computer.

  ·         The computer enters sleep (S3) or Hibernate (S4) and then allows the recovery of standby or hibernation. This process is repeated several times.

  This may be cause AMD has identified a problem with the host controller. This problem causes the host controller to hang under specific circumstances. For example, this problem may occur if the USB device uses the recurring schedule on the USB host controller

  See the following article from Microsoft to read the dump file.

  How to read the memory dump file that is created by Windows if an incident occurs

• XP installation blue screens

  I have a R100 and also a P2000 and uses an external cd-rom Toshiba F - TO - CD - 24 L with adapter PCMCIA.

  During the installation of XP blue screens exactly the same installation point on two laptops. It is at the stage of setting up pre - gui that is right before you accept the EULA.

  I tried changing the settings of Cardbus, using a different external (Freecom) CD and can't get out.

  I can use the restore cd but don't want to because I need to prepare an image of the company.

  I called the technical support of Tosh and they claim, there is no problem and that they do not support anything other than the restore cd and not ready to discuss it.

  Is there anything else I can try - a toshiba new CD-ROMs may be? Why do the work of the cd of restoration but not my xp cd?

  Hello

  Toshiba Recovery CD is composed not driver for external Toshiba CD and the Microsoft Windows XP Home edition CD. Before starting the installation of the device external need the driver to work properly.

  Please visit this site
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&from=faq_selection&CFID=CD-ROM+and+DVD&FID=tro0000001721

  Good bye

• Re: Satellite A200 - drive recovery gives blue screen

  It makes me crazy.
  I have two laptop A200 which were granted to the staff. They left and laptops have been completely OK.

  Before I have the laptops to new staff I format and reinstall the operating system and software. Simple I thought, I've got the recovery DVDs. I rebooted with the DVD into a party to the process, everything seems to be fine. It restarts in windows enter the first screen of XP of windows with green dots below. I have a very quick flash of a blue screen and restarting the laptop, then continues with the quick blue screen through.
  This happens on the two A200 I have.

  If I try to load windows XP from our copy of the retail windows, he always says that no records can be detected. Again, it happens on both. I hear say you, it's the hard drive. Well, it's not the hard drive. I removed the disc placed in another laptop and a windows PC and it works as it should, it's two hard drives. With hard drives in laptops original A200 I can install Linux (unbuntu) without any error. I run disk check that everything is OK.
  Toshiba says it's a virus! Seems to be the answer to everything, that they can't solve by phone!

  I love the laptops of the thesis, they have been very good for us here, would like to get them running again. They have two years out of warranty.
  The version of the BIOS is 5.20
  Any help would be great

  Hello

  It's a little difficult to say what happens to your laptop, but if I have problems installing, I erase hard drive with a bootable cd of Acronis support, Acronis drive Cleanser

  http://www.Acronis.com/enterprise/products/DriveCleanser/index.html

  or East-Tec DisposeSecure

  http://www.East-Tec.com/download/index.htm

  These programs are shareware and need to be enabled in order to make a bootable media.

  I erase a hard drive, then install the original copy of Windows for my clients. If they have problems with ODD, I make a bootable USB key (if the Bios supports) or higher Lan installation. By the way, have you tried to install from a bootable USB key.

  Talk about viruses, it can also take place the cloth of hard drive is recommended. In our service, we answer also like this phone as say the guys at Toshiba. Believe me, it's not easy to solve problems over the phone, the problem is that many customers cannot adequately describe the malfunction!