Photo disappeared when editing on Windows Picture Manager.

Similar Questions

• How to make windows Picture Manager program by default to open jpeg files and how do I email photos smaller, so they don't take so much space?

  When I try to open a jpeg file, I get an error message... Acrobat Reader cannot open file... so I have to right click on each photo and open with Windows Picture Manager.  I want to be able to open a JPEG with a single click.  Also, I want to be able to send smaller photos so that they are sent faster and do not require a lot of time the receiving computer to get... Thank you.

  I'm guessing that the regfix didn't work?

  Outlook or Outlook Express? In any case... when
  attaching directly to an e-mail message, do you
  don't see no dialog resize.

  The following free PowerToy for Windows XP
  can resize batches of photos very quickly:

  Click on the following link and the left click of the
  Tab "PowerToys"...

  Windows XP downloads
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download and install: ImageResizer.exe
  (Filename: ImageResizerPowertoySetup.exe)
  (does not work on Vista)

  Then, you can open any folder containing
  images and you will have an option to resize.
  Just right click the selected image files and
  Choose resize images in the menu. You
  can select a picture or an entire group.

  The program will place the resized in copies
  the folder with your originals.
  (Tip: * never * overwrite your originals)

  To ensure that images in both portrait and
  landscape orientation are resized to the
  same dimensions... go to... Advanced...
  and enter the largest number in these two areas.
  IOW... for 600 x 800... Enter 800 in these two areas.

• How to download my photo as the user's windows picture, how do I add my profile in the OS as an administrator

  How to download my photo as the user's windows picture, how to add my profile in windows OS (vista, xp, win98se) as an administrator windows/PC?

  Hello

  You can choose an image that will be associated with your user account and shown on screens or menus that display your user name, such as the home screen or the start menu.

  Follow the steps in the article mentioned below:

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Choose-a-picture-for-your-user-account-and-Start-menu

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_picture_change_w.mspx?mfr=true

• I can't get the watermark disappears when I by a picture, why?

  I can't get the watermark disappears when I by a picture, why?

  Please refer to I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Photos disappeared from the list of pictures; can still be found through faces.

  Mac OS X 10.7.5.  Bought a separate individual photo digitizer, scanned photos of Scandisk, inserted Scandisk for iMac and managed to import all the photos of 60.  Use iPhoto to rotate, publishing, culture, label and face to identify all the photos; no problems occurred.  Returned to scan a photo, and when this picture was imported, pictures of 70 prerequisites disappeared photo under the library list and the last import of 12 months.  I can always find pictures singularly under Faces, faces, I've identified, but I can't find the pictures on a list.  The pictures are not in the trash.  Can't find pictures in the Finder or in any list.  The photos seem to be on the computer somewhere, because if I remember a name and go to the Faces, I can find a photo at a time.  How can I find photographs and reconnect?

  I finished her rebuild thumbnails, database repair and rebuild the control/Option/start iPhoto database, select these options.  He has not fixed the problem.

• Running Windows XP; Windows Picture Manager embarks...

  I am running Windows XP. Totally out of the blue, starting just tonight, when I download an image from a Web site and save it on my hard drive, Microsoft Picture Manager automatically launch itself by opening this picture just saved. This has never happened before, I have no idea how it started, and I have no idea how to fix... Help!

  Hello

  Glad to know you found the problem.

  See you soon!

• CC of Adobe InDesign disappears when editing text. Help, please!

  System:

  Processor: Intel (r) CPU of Core i7 - 2620 M 2.70 GHz
  RAM: 8 GB

  System type: 64-bit OS

  Edition of Windows: Windows 7 Enterprise

  Graphics card: AMD over-pants M5950

  With the help of three monitors

  The problem:

  When editing in InDesign my text disappears. I have to wait, DESACT and then click back, or to zoom or zoom out to get the text back. This happens on multiple files, various size documents and it happens sporadically. Perform a restart of the whole system will sometimes fix the problem for about 5 minutes and then it will start again. It's really bad in my productivity and make me question my subscription to Adobe. I need this problem as soon as POSSIBLE.

  Here is what I tried:

  • Complete the uninstall and reinstall the program

  • Several reboots

  • PC Cleanup

  • Updated graphic driver

  • Text wrapping is set to off

  None of these solutions solves the problem.

  Any help would be appreciated!

  Thank you

  Reinstall not rebuild preferences, which is the first line of defense against the tedious.

  Quit in InDesign, and then open it again while maintaining the control, Alt and shift keys (command, Ctrl, Option, and shift on a Mac). When you receive the alert of "Delete preferences"?, release the keys, and then click Yes/ok.

  Try this...

  AM

  Details: http://indesignsecrets.com/rebuilding-indesign-preferences.php>

• Windows 7 memory 0x002bbb0 error code when you install Windows USB manager?

  When trying to install Windows USB Manager I memory could not be written.

  Then it gives me this error 0x002bbb0 code?

  Any help would be great! Thank you

  Hello

  Check the links below.

  http://Windows.Microsoft.com/en-us/Windows7/preventing-low-memory-problems

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Hope this information helps.

• in the windows photo gallery when I shoot 1 picture to correct, there a haze of red around him ideas please

  I wanted to say that this is one of my photos

  It may be a problem with a color profile...
  Take a look at the following articles:

  (942632) how to remove the association between
  the display and a color profile when images are
  displayed with the wrong color
  http://support.Microsoft.com/kb/942632/en-us

  (939395) when you view an image in Windows
  Photo Gallery on a Windows Vista-based computer,
  the picture is yellow
  http://support.Microsoft.com/kb/939395/en-us

• Control arrays disappear when closing the window .uir

  Using LabWindows/CVI 2010, I created a program of simple test with a panel containing a couple of buttons push, three tumbleurs and three control LED. I can create arrays of controls containing the toggle switches and/or LEDs in the .uir editor and access in the program, but when I close the .uir editing window and reopen the .uir file, control arrays are gone from the .uir file and of course when I rebuild the program I can't access it. This happens if I leave LW/CVI entirely or if I just close the editor of .uir. If I explicitly the file .uir after creating tables, everything seems fine, but then when I close the .uir window I see an asterisk briefly appear in the tab of the file name, as if it is modify the file, and then re-register on the goal.

  I can duplicate this just creating one or two control panels and by closing the window. Sets disappear, even though I explicitly save the .uir file after I created them. Is there something I can do to prevent this?

  Thank you

  Brian

  Brian.

  It seems that your UIR may have have been saved for an earlier at some point.  If you open the UIR and look in the lower right corner, you say 'file UIR 2010'?  "Otherwise, you need to click on File ' Save *.uir as and save the UIR under a 2010 UIR.

  

  If you choose to save the IUR for an earlier version, CVI remembers this decision and always saves the IUR for than the previous version.  You will have to explicitly choose to save them for the current version.

  Let me know if this does not fix things for you-

  NickB

  National Instruments

• Problem recording photo after the edition of windows live photo gallery

  Whenever I try to edit an image in windows live gallery and try to save it, I get the following message appears AN ERROR IS PREVENTING PHOTO GALLERY OF SAVING THIS PHOTO.

  Can you offer me a solution or let me know if microsoft has a fix for this problem

  Hi jetparjas,

  Thank you for using answers Forum.

  You use software to back up your information?
  Maybe a new external drive with a backup program?
  Using drive encryption?

  Looks like some program prevents the Gallery to save changes, this usually occurs with a backup software that monitors changes in the files. Sometimes the software that allows us to make changes think the file is open somewhere else and it will not save.

  You can try to perform a clean boot to see if a startup program is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mask photo gallery when edited

  When I edit a photo in the Gallery, it becomes a hidden file.  I can't see it in the gallery or in the browser, but when I copy the file origin to another folder, it asks if I want to replace the file.  Obviously if this is not corrected Gallery is a program that I will never use again.

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://windowslivehelp.com/product.aspx?ProductID=20

  Hope this helps,

• Previous uploaded photos disappeared when I downloaded more photos.

  I had downloaded photos to my iPad to my PC using iTunes when I got my iPad Mini.  I downloaded some pictures yesterday and the previous photos, I had downloaded are now gone. How can I download more pictures without losing the photos that I've saved to my iPad?

  You must ensure that you check ALL of your photos you want to sync'd iTunes on your iPad or they will be replaced by some pictures are current.

  Good luck

• Windows Vista Games disappeared when I installed Windows 7

  After I clean installed Windows 7, I noticed that all my games in Windows Vista (for example, solitaire spider, chess, etc.) had disappeared. How to make a comeback? When I look in the start menu under the Games folder in the Games Explorer, there is NO games listed! Help, please!

  If you have installed the Windows 7 Professional SKU, that's why.  Make your way to:

  Beginning
  -> Control Panel
  --> Programs
  ---> Turn Windows features on or off

  And check the box of games and OK your way back to. :-) Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Cursor disappears when entering, the window is not active.

  I have Vista home SP2.
  When I type the cursor disappears and the typing stops. The window is not active until I'm clicking on it again. It's as if it times out.
  I thought it was just Firefox, but that's all. I watched q. similar, but nothing. It has been since the last update, or just before, then, either, about 3 days.

  Hi Hobittual,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.

  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. ensure that the safe mode option is selected.

  4. press ENTER. The computer then begins to start in safe mode.

  Check if you have the same problem in safe mode as well.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Let us perform virus scan online that may help you resolve the issue.

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  You can go to Microsoft Security Essentials protect your computer from malware.

  Click on the link below for more information on Microsoft Security Essentials.

  http://www.Microsoft.com/security_essentials/

  You can also check out the link below.

  How to get rid of malware

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP