Error EXPDP EXP-00068
HelloOracle 10.2.0.4.0 under Windows
I receive the error message described
EXP-00068: SYSAUX tablespace is offline.
When I check the status of Tablespace, it is online and Datafile status is available.
I found that the SYSAUX tablespace requires recovery.
Select a.file #, b.SID, a.status
v $ datafile a, v$ tablespace b
where a.ts #= b.ts #.
and b.name = 'SYSAUX';
The SYSAUX data file display the State of recovery.
Concerning
KSG
Published by: KSG on January 21, 2013 12:00
(results)
check error in the alert log file when this error to exp...
Tags: Database
Similar Questions
-
Hello friends,
I face an error when exporting data.
I have a card reader on my database server and create the directory path in this mapped drive.
I got drive letter (P :) to this network drive and also give read, write permission for the respective user to take backup but when I pulled the control it gives me error.)
Command: expdp complete system/***@SERVICENAME directory = Y = EXPDP_DIR = FULL.dmp FULL.log = logfile dumpfile
Error:
ORA-39002: invalid operation
ORA-39070: unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS." UTL_FILE", line 488
ORA-29283: invalid file operation
Please guide me to solve this error.
--
Thank you and best regards,
Pradip PatelPL post OS and database versions.
PL see these Docs MOS
Export DataPump (EXPDP) to a Windows mapped network drive returns error ORA-39002 ORA-39070 ORA-29283 ORA-6512 [ID 858401.1]
Impossible to export to a mapped using DataPump [ID 428130.1] network driveHTH
Srini -
Table view is different in expdp/impdp?
11.2 / Linux
With exp/imp original: OWNER, TABLES and FULL modes are mutually exclusive. IE in original exp, if you want to make a backup of the EMP table in the scott schema, the following will be error
You must prefix the name of the owner (tables = < owner >. < table_name >) as below for the prescription aboveexp / tables= EMP owner=SCOTT file=selected_tables.dmp log=selected_tables.log But this will end up in EXP-00026: conflicting modes specified EXP-00000: Export terminated unsuccessfully
But in impdp things work differentlyexp / tables= SCOTT.EMP file=selected_tables.dmp log=selected_tables.log
I provided a dump expdp of REG_TRACK_EVT of a CLS_USR_PROD scheme. I wanted to import that table in the schema of development CLS_USR_DEV. So, I did. But launch error ORA - 39166 TI kept as below
To solve this problem, I had to remove the parameter TABLES (!) and use the REMAP_SCHEMA parameter$ impdp userid=\'/ as sysdba\' DIRECTORY=DPUMP_DIR DUMPFILE= reg_track_evt.dmp LOGFILE=reg_track_evt-imp.log tables=CLS_USR_DEV.REG_TRACK_EVT Import: Release 11.2.0.1.0 - Production on Mon Jul 30 18:24:32 2012 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options ORA-39002: invalid operation ORA-39166: Object CLS_USR_DEV.REG_TRACK_EVT was not found.
If this is the case, then what's the point of having the TABLES parameter in impdp?impdp userid=\'/ as sysdba\' DIRECTORY=DPUMP_DIR DUMPFILE= reg_track_evt.dmp LOGFILE=reg_track_evt-imp.log REMAP_SCHEMA=CLS_USR_PROD:CLS_USR_DEV
It's really the same thing regarding conflicting modes. Of what you have used in your import command:
Impdp userid =------"/ ACE sysdba\ ' DIRECTORY = DUMPFILE DPUMP_DIR = LOGFILE reg_track_evt.dmp = reg_track_evt - imp.log REMAP_SCHEMA = CLS_USR_PROD:CLS_USR_DEV
If you are remapping CLS_USR_PROD:CLS_USR_DEV then the table in the dumpfile is called CLS_USR_PROD. REG_TRACK_EVT and you tried to import CLS_USR_DEV. REG_TRACK_EVT and this table did not exist.
What you specify on the tables = command is the table in the desired dumpfile. What you specify in the remapping of the color settings is where you want the table created, therefore, your first order was close, you need this:
Impdp userid =------"/ ACE sysdba\ ' DIRECTORY = DUMPFILE DPUMP_DIR = LOGFILE reg_track_evt.dmp = reg_track_evt - imp.log tables = CLS_USR_PROD. REG_TRACK_EVT REMAP_SCHEMA = CLS_USR_PROD:CLS_USR_DEV
I hope this helps.
Dean
-
ORA-04063: package body 'SYS. DBMS_LOGMNR_INTERNAL"contains errors
Dear all,
On my production server database RAC node 2, with 11 GR 2 and Linux is the operating system.
Last month, I created a new tablespace and set it up as a logminer tablespace by using the command:
EXECUTE DBMS_LOGMNR_D.SET_TABLESPACE ('TBS_LOGMINER');
Today morning I accidentally dropped the TBS_LOGMINER tablespace and don't have any backup of the tablespace.
Now when I recreate the tablespace and run the command:
EXECUTE DBMS_LOGMNR_D.SET_TABLESPACE ('TBS_LOGMINER');
It returns the following error:
ERROR on line 1:
ORA-04063: package body 'SYS. DBMS_LOGMNR_INTERNAL"contains errors
ORA-06508: PL/SQL: called program unit is not found:
* "SYS. DBMS_LOGMNR_INTERNAL. "
ORA-06512: at "SYS." DBMS_LOGMNR_D', line 135
ORA-06512: at line 1
Even when I tun and expdp exp
For exp ORA-04063: package body 'SYS. DBMS_LOGREP_UTIL"contains errors
For expdp
ORA-04063: package body 'SYS. DBMS_INTERNAL_LOGSTDBY"contains errors
ORA-06508: PL/SQL: called program unit is not found: 'SYS. DBMS_INTERNAL_LOGSTDBY ".
ORA-06512: at "SYS." "KUPV$ FT", line 991
ORA-04063: package body 'SYS. DBMS_LOGREP_UTIL"contains errors
ORA-06508: PL/SQL: called program unit is not found: 'SYS. DBMS_LOGREP_UTIL ".
I tried to compile objects disabled utlrp.sql running, but it did not help.
Its my production environment and I doubt that I could have run catalog.sql and catproc.sql that can cause other problems as well.
Please guide how to pass through this error.
Kind regards
ImranIts my production environment and I doubt i might have to run catalog.sql and catproc.sql that may cause other problems as well.
Why? You manipulated SYS?
running catalog.sql and catproc.sql in a normal situation only takes time and nothing else.---------
Sybrand Bakker
Senior Oracle DBA -
Hi all
I had configured Highway c + e and traversal area present you on C and E.
But the event log show me an error by minute and jabber cannot open a session.
Anyone know what the average error?
-----------------------------------------------------------------------------------------------------------------
2015 08-21 T 15: 36:38 + 08:00 sshdpfwd [12233]: error: mm_request_receive: socket closed 2015 08-21 T 15: 36:38 + 08:00 "" sshdpfwd [12235]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "disconnected from 200.20.30.93" elements UTCTime ='2015-08-21 07:36:38" 2015 08-21 T 15: 36:38 + 08:00 sshdpfwd [12235]: received disconnect from 200.20.30.93: 11: disconnected by the user 2015 08-21 T 15: 36:38 + 08:00 "" sshdpfwd [12233]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "child user is on the NEST 12235" elements UTCTime ='2015-08-21 07:36:38" 2015 08-21 T 15: 36:38 + 08:00 "" sshdpfwd [12233]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "publickey accepted for 200.20.30.93 _pfwd 35380 ssh2 port: RSA + SHA256:XkWEN5bLqWjVRYxTTVeAnHYD5B7pEOtrpkhnQfc + AEo cert" elements UTCTime ='2015-08-21 07:36:38" 2015 08-21 T 15: 36:38 + 08:00 "" sshdpfwd [12233]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "authorized by X 509 (rsa): CN = expc1.hxipcc.com, OR = HX, O is HX, L KM, ST = YN, C = CN =" elements UTCTime ='2015-08-21 07:36:38" 2015 08-21 T 15: 36:38 + 08:00 "" sshdpfwd [12233]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "35380 on connection to 200.20.30.93 port 10.0.51.99 port 2222" elements UTCTime ='2015-08-21 07:36:38" 2015 08-21 T 15: 36:38 + 08:00 "" sshdpfwd [12233]: Event = "sshd" Module ="openssh" Level = "INFO" detail = '/ proc/self/oom_score_adj to 0 value"elements UTCTime ='2015-08-21 07:36:38"
This is a Bug of cosmetics.
You can see the information in the link below:
CSCuv97323: 8.6 shows 'closed socket"error on Exp-E but MRA is successful
-
Hello
I tried to export a schema from a database of remote 10 gr 2 RHEL on my local desktop which has Oracle 11 g Client (Windows), but it ended with following errors
EXP-00008: ORACLE 942 error encountered
ORA-00942: table or view does not exist
EXP-00024: Export Export not installed views, please notify your DBA
EXP-00000: export completed unsuccessfully
The query I used is: owner username/pwd@remotedb exp = someuser leader = D:\someuser.dmp log = schema.log
I need to transfer the dump file on another server in RHEL test.
Can I export using the Oracle customer or I need a database to start remote export?
PS: I asked me not to use Datapump for some reason any.
Kind regards
Germain
It can be done, but you need to export using 10 g client.
-
Hi all
I was full export our data base.
Afterwards, I check the log in case of success.
But I don't pay attention to it.
How can I resolve the warning above?Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production With the Partitioning, OLAP and Data Mining options Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set server uses UTF8 character set (possible charset conversion) About to export the entire database ... . exporting tablespace definitions EXP-00068: tablespace TEMP is offline . exporting profiles . exporting user definitions . exporting roles . exporting resource costs . exporting rollback segment definitions . exporting database links . exporting sequence numbers . exporting directory aliases . exporting context namespaces . exporting foreign function library names . exporting PUBLIC type synonyms . exporting private type synonyms . exporting object type definitions . exporting system procedural objects and actions . exporting pre-schema procedural objects and actions . exporting cluster definitions . about to export SYSTEM's tables via Conventional Path ... . . exporting table DEF$_AQCALL 0 rows exported . . exporting table DEF$_AQERROR 0 rows exported . . exporting table DEF$_CALLDEST 0 rows exported . . exporting table DEF$_DEFAULTDEST 0 rows exported . . exporting table DEF$_DESTINATION 0 rows exported . . exporting table DEF$_ERROR 0 rows exported . . exporting table DEF$_LOB 0 rows exported . . exporting table DEF$_ORIGIN 0 rows exported . . exporting table DEF$_PROPAGATOR 0 rows exported . . exporting table DEF$_PUSHED_TRANSACTIONS 0 rows exported . . exporting table DEF$_TEMP$LOB 0 rows exported . . exporting table LOGSTDBY$APPLY_MILESTONE 0 rows exported
The temp is online?Why is that when I select tablespace_name,status from dba_tablespaces; SYSTEM ONLINE UNDOTBS1 ONLINE SYSAUX ONLINE RBS ONLINE TOOLS ONLINE CISTS_01 ONLINE TEMP ONLINE
Thank youYou must do this tablespace in the temporary tablespace default for this user
SQL > alter user username tablespace temporary temp1;
You can also specify temp1 as temporary tablespace default database
SQL > ALTER DATABASE nom_tablespace by DEFAULT TABLESPACE TEMPORARY;
-
ORA-22924: snapshot too old
Hello
I use Oracle XE on Fedora. Everything by exporting a schema I get following error.
EXP-00056: ORACLE error 1555
ORA-01555: snapshot too old: rollback segment number with the name "" too small
ORA-22924: snapshot too old
Can someone help me please how to fix this.
Thank you
HabibORA-22924: snapshot too old
This message indicates, this is not a 'normal' cliché too old problem of the UNDO tablespace, you have corruption in a table being exported from MOS/metalink LOB segment:
Export fails with ORA-02354 ORA-01555 ORA-22924 and how to confirm the Corruption of the LOB Segment using the export utility? [833635.1 ID]
-
Import of differnet schema table using the data pump in
Hi all
I try to export a table to a diagram MIPS_MDM and import it in the MIPS_QUIRINO schema in the different database. I get the below error.
expdp MIPS_MDM/MIPS_MDM@ext01mdm tables = QUARANTINE directory = DP_EXP_DIR dumpfile = quarantine.dmp logfile = qunat.log
To import
Impdp MIPS_QUIRINO/MIPS_QUIRINO@mps01dev tables = QUARANTINE directory = DP_EXP_DIR dumpfile = quarantine.dmp logfile = impd.log
Please can I know what is the exact syntax to import in the scheme of differnet.
Thank you.http://download.Oracle.com/docs/CD/E11882_01/server.112/e16536/dp_import.htm#BEHFIEIH
-
Dear all,
I take the entire database export using the script below
exp username/password FULL = Y FILE=/image10/hlledw1/edwblr/EDW1exp.DMP,/image11/oradata/edwexp/EDW2exp.DMP,/image12/oradata/edwexp/EDW3exp.DMP LOG=/image10/hlledw1/edwblr/EDWexp.LOG compress forced = y = y grants = index y = y FILESIZE = 95G
but whenever its getting arrested after throwing the error below:
EXP-00056: ORACLE error 3113
ORA-03113: end of file on communication channel
EXP-00056: ORACLE error 24324
ORA-24324: service handle not initialized
EXP-00056: ORACLE error 24324
ORA-24324: service handle not initialized
EXP-00056: ORACLE error 24324
ORA-24324: service handle not initialized
EXP-00056: ORACLE error 24324
ORA-24324: service handle not initialized
EXP-00000: export completed unsuccessfully
I checked with the possibilities to describe as below and all is well.
The ORA-03113: end-of-file on communication channel error is a generic error. The ORA-03113 error when the connection indicates that the connection has been established, but lost later, like a timeout.
ORA-3113, for example, could be reported for each of these scenarios:
-Machine server crashed
-Your server process was killed at the level of the o/s
-Referee
-Errors internal oracle / gave up on the server
-Customer trouble managing multiple connections
-etc... etc... etc... -a lot of possible causes.
then I checked the number of cron jobs running it but a script that runs every day 08:00 saw bekow description
RM /rmanbkup1/EDW2/RCAT_exp*.dmp
MV/rmanbkup1/EDW2/RCAT_exp_ * / rmanbkup1/EDW2/log
ORACLE_SID = RCAT; export ORACLE_SID
rman/rman exp date ' date +"%d_%b_%y"'.dmp journal = / rmanbkup1/EDW2/RCAT_exp_ "full file = +"%d_%b_%y"'.log / rmanbkup1/EDW2/RCAT_exp_ = y buffer = 67108864 ranks = y
Is that the cron job closing my export script.
Ask your advice urgently.
Kind regards
User994533Check the contents of the file file stop_db.sh... It seems that this script will stop your database
Concerning
-
Hi DBA:
We are evaluating different methods of upgrading 11 GR 2 DB to 12 c (12.1.0.2) this year, it is very important for us to use the right method. It was reported that when DB version was 9i and has been updated to 11g, there were some order of tables 'line' was wrong when execute SELECT statements in application (Java application) - at the moment I didn't if it is ' select * from... "or any specific part with a"where"clause, and what type of data was wrong (maybe sequence CLOB data, etc.).
I think I know, ' exp/imp', "expdp/impdp" logical backup of DB methods. Therefore, Oracle automatically import data and fix it in each table. If no error in impdp connects after it's over, should not be any mistake, right?
If the use of the method of 'creates a new data + expdp/impdp basis for schemas user' 11g 12 c port data, questions:
1. this method will lead to erroneous sequence data when ordering? If so, how to re - generate the sequence number?
2. this method can bring CLOB, BLOB data and without any errors? If error, how to detect and repair?
I use the same method in the 10.2.0.5 to 11g port data, no problem.
I'll keep this thread posted after getting more information from application.
Thank you very much!
Dania
INSERT... SELECT, CREATE TABLE in the SELECT and Export-Import will all "re-organize" the table by assigning new blocks.
In place--update (using DBUA or command line) don't re-create the user tables (although it DOES not rebuild the data dictionary tables). Therefore, does not change the physical location of lines for user tables. However, there is no guarantee that a further reason for INSERT, DELETE, UPDATE instructions does not change the physical location of ranks. Nor is it a guarantee that a SELECT statement will return always stored in the same order unless an ORDER BY is specified explicitly.
If you export the data while it is still used, you don't avoid update sequences in the source database. Usually results in a mismatching number sequence between the source database and the new database (imported). In fact, even the numbers may be different, unless you use CONSISTENT or FLASHBACK_SCN. (These two options in exp / expdp do NOT prevent update sequences). The right way to manage sequences is to rebuild or increase them in data imported with the values in the data source, once the import is complete.
Hemant K Collette
-
Expdp with exclude in error.
Hello
Try to export a schema, excluding 1 table of it. See the following comand.
expdp------"/ ACE sysdba\ ' exclude = TABLE: directory 'D_FEE_TRX' = STRUCTURE SCHEMAS = OYS_LOAD dumpfile = OYS_LOAD.dmp logfile = OYS_LOAD.log
Error as below.
Export: Release 10.2.0.4.0 - 64 bit Production Wednesday, September 4, 2013 10:33:21
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
With partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39071: value for EXCLUDE is ill-formed.
ORA-00920: invalid relational operator
Please suggest.
Hello
You can try these
expdp------"/ ACE sysdba\ ' exclude = TABLE: directory '="D_FEE_TRX"' = STRUCTURE SCHEMAS = OYS_LOAD dumpfile = OYS_LOAD.dmp logfile = OYS_LOAD.log
expdp------"/ ACE sysdba\ ' exclude = TABLE: 'IN ('D_FEE_TRX')' directory = STRUCTURE SCHEMAS = OYS_LOAD dumpfile = OYS_LOAD.dmp logfile = OYS_LOAD.log
If this does not work, use him parfile as
exp.par
exclude = TABLE: directory '= "D_FEE_TRX" ' = STRUCTURE SCHEMAS = OYS_LOAD dumpfile = OYS_LOAD.dmp logfile = OYS_LOAD.log
expdp------parfile = exp.par ' / as sysdba\.
Oracle recommends never using the sys/system of export and import user
HTH
-
exp works fine but expdp does not work... !!!
Well, I used exp to export my database on 10g and it works absolutely fine but when I use expdp with the respective syntax I get this error
ORA-39002: invalid Operation
ORA-39070: unable to open the log file
ORA-29283: invalid file Operation
ORA-06512: AT SYS. UTL_FILE 475 line
ORA-29283: invalid file Operation
Published by: Chase Suhail on July 31, 2010 03:55Create a directory named expdp_dir located in the D:\oracle\product\10.2.0\db_1 enter the following sql statement:
SQL > create directory expdp_dir as 'D:\oracle\product\10.2.0\db_1 ';
Then grant read and write permissions for the users who will perform the data pump export and import.
SQL > grant read, write on directory expdp_dir to the system, User1, User2, user3.
How to export complete
A full export is specified with the COMPLETE parameter. A database export is complete, the entire database is unloaded. This mode requires the role of permission. Example:expdp system $ /
DIRECTORY = expdp_dir COMPLETE DUMPFILE = expfull.dmp = y LOGFILE = expfull.og Schema export mode
The schema export mode is called using the SCHEMAS. If you don't have any role permission, you can export your own schema. If you have the role of the permission, you can export several patterns at once. You can optionally include the system privilege grants as well.$ expdp HR/hr DIRECTORY = expdp_dir DUMPFILE = schema_exp.dmp SCHEMAS = HR, sh, oe
How to export table
This export mode is specified using the parameter TABLES. In this mode, only the specified tables, partitions and their dependents are exported. If you do not have the role of the permission, you can only export tables in your schema. You can specify only the tables in the same schema.$ expdp HR/hr DIRECTORY = expdp_dir DUMPFILE = tables_exp.dmp TABLES = employees, jobs, services
-
Does not work EXP EXPDP works in 11g
I tried to export a table with exp in 11g and it will not be exported to the table. Then I tried to export the table using data pump and it does not export the table. Are there situations that usually back the correct obecjts to 11g exp?
SQL > select * from v version $;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL > desc momentum.mf_apas_frm_ln
Name Null? Type
----------------------------------------- -------- ----------------------------
UIDY NOT NULL VARCHAR2 (75)
ASET_NUM VARCHAR2 (30)
ASET_TYP VARCHAR2 (10)
BTMT_NUM_CH CHAR (5)
DSCR VARCHAR2 (255)
ENTP_LNUM_CH CHAR (5)
LNUM_CH CHAR (5)
DATE OF OPLK
PARN_OF_LINE_ID VARCHAR2 (75)
QY_CHAR CHAR (20)
STAE_OF_LINE VARCHAR2 (20)
XTRN_LNUM_CH VARCHAR2 (20)
SQL > exit
Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
k801ora@jd1su143 in/a0143/d01/backups/ufms908: exp system file = table.dmp tables = momentum.mf_apas_frm_ln
Export: Release 11.2.0.1.0 - Production on Thu Apr 1 08:16:18 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Password:
Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
Export in US7ASCII and AL16UTF16 NCHAR character set
Server uses WE8MSWIN1252 (possible character set conversion) character set
About to export specified tables by conventional means...
Current user has changed to PULSE
EXP-00011: MOMENTUM. MF_APAS_FRM_LN does not exist
Export completed successfully with warnings.
k801ora@jd1su143 in/a0143/d01/backups/ufms908: expdp system file = tables.dmp tables = momentum.mf_apas_frm_ln
Export: Release 11.2.0.1.0 - Production on Thu Apr 1 08:16:28 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Password:
Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
Legacy mode Active due the following parameters:
Legacy Mode parameter: "file = tables.dmp" place: command, replaced by line: "dumpfile = DPUMP_DIR_908:tables.dmp.
Directory of database object 'DPUMP_DIR_908' has been added to the specification of the file: 'tables.dmp. '
Legacy mode is set to reuse_dumpfiles = true parameter.
Legacy mode is set to nologfile = true parameter.
Return of FLAME activated automatically to preserve the integrity of the database.
Start "SYSTEM". "" SYS_EXPORT_TABLE_01 ": System / * dumpfile = DPUMP_DIR_908:tables.dmp tables = momentum.mf_apas_frm_ln reuse_dumpfiles = true nologfile = true
Current estimation using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type TABLE_EXPORT/TABLE/PROCACT_INSTANCE
Object type TABLE_EXPORT/TABLE/TABLE processing
Processing object type TABLE_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Object type TABLE_EXPORT/TABLE/CONSTRAINT/treatment
Object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
Object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
. . exported "MOMENTUM." "" MF_APAS_FRM_LN "0 KB 0 rows
Main table 'SYSTEM '. "" SYS_EXPORT_TABLE_01 "properly load/unloaded
******************************************************************************
Empty the file system set. SYS_EXPORT_TABLE_01 is:
/A0143/D01/backups/ufms908/tables.dmp
Work 'SYSTEM '. "" SYS_EXPORT_TABLE_01 "conducted at 08:17
k801ora@jd1su143 in/a0143/d01/backups/ufms908:Hello
It's nothing new with exp with 11 GR 2, oracle allocates not any initial extensions/segments in the table at the same time to create. It allocates initial extensions/segments during the first insertion. So now when you have not all segments/extensions to export exp throw you the error.
Concerning
Anurag -
Original title: opening of the pop ups
I have Vista Home version. When I connect, I get the pop - ups following:
1.) _Windows sidebar Settings.ini. is used by another system.
Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file can corruption exp.
3.) down the application did not start.
Also: while I'm on the internet a pop - up occurs from time to time indicating: "Internet Explorer has stopped working". Sometimes I get started, and sometimes I can just 'X' out and I'm always on.
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?I suggest you try the procedure below.
Step 1: Try to perform the clean boot in order to solve startup error messages.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
Step 2: I suggest you try the steps outlined in the article below to solve the problem of internet Explorer.
http://support.Microsoft.com/kb/936213Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Maybe you are looking for
-
After always have any 76gbs free space on my ipod classic, I tried to synce a playlist and now I tells me that I don't have enough space on my ipod drive, I have other 74 gbs of others according to the ipod, what are theses, in part it says that I do
-
Is there no way to disconnect and close Skype with a single click or a keyboard shortcut?I hate that need me 3 steps and 5 clicks to do!1 Skype > sign out2. right click on taskbar icon > "exit Skype.3. click on "Exit" to confirm (arrrghh!)Am I missin
-
Pavilion in a Q000na: Windows 10
I am surprised to not find my problem on the forum after talking to Stella to the HP Support I thought it was common. I bought the above machine this week, originally, it was on Windows 8.1 but offered to upgrade to Windows 10. After upgrading my mac
-
Deleted messages reappear again and again
9.2 mail installed on a MacBook Pro with El capitan 10.11.3. Can I delete the mail on my account apple Safari (web interface), the iPhone 4 and iPad, but not with the messaging applications. When I delete a message in the Inbox, the message reappears
-
OCR software for HP Deskjet 2050 scanning
Hello to all community workers I have a new HP Deskjet 2050. This is printer * beep * scan * beep * Copier. I would like to create soft copy of some books of text using the OCR software. OCR is optical character recognition software, which can conver