Error "Failed to setup of the Windows updates"

Similar Questions

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Loop "Failed to setup of the Windows updates"

  Recently, I updated the installation of my laptop due to severe speed due to bloatware limits that were provided on the new installation of my laptop. I bought a few months ago and it was fine, the issue of the speed bar and was updated to the latest edition of 8.1 from 24.

  Since the update however it updated and I have the configuration error. I tried hard reset options and wait etc. and the laptop was more or less on the same page for almost 6 hours - a hard reset allows not a choice of boot - he sends me directly to the screen of "failure". In addition, I do not have the disks as the product came with 8 pre-installed windows (where the bloatware).

  For reference, I use a 250 HP (i3 / 4 GB / Intel graphics card)

  Seriously, I'm full of ideas - any help would be greatly appreciated.

  Glenn

  Hi Glenn,.

  This issue could be the corrupted Windows Update components. So I suggest you try to rename pending.xml file and check if it helps.

  You can refer to the suggestion made by me in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-8-stuck-at-failure-configuring-Windows/178c8652-997e-4006-BC0E-7d1d23f847f2

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Windows XP Media Center Edition - get code 0x8024400A error when you go to the Windows Update site

  I had to reinstall my OS, XP Media Center edition 2002 with Service Pack 2, and when I go to the Windows Update site I get the following message "0x8024400A - site error Code has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  Can someone tell me what may be the problem?

  0x8024400a

  -2145107958

  SUS_E_PT_SOAPCLIENT_PARSE

  http://support.Microsoft.com/kb/836941

  UTC/GMT is 09:05 Sunday, June 10, 2012

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• 0x8024400a this error is when I strt the windows update and I can't go to xp3. What's the fix

  I rebooted just my computer with windows xp. Before two years, everything went smoothly, but a day of return, it does not update. With difficulty, I loaded IE8, but can not go to SP3. the error code is 0x8024400A. Can U help me.       MUMTAZ

  Why can you not download the full file of SP3? If you use some sort of Download Manager, then do not use it.

  The previous link order:-.

  Download Service Pack 3 (SP3) from the Microsoft Download Center

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  

  Download the Windows XP Service Pack 3 package now

• Repeatedly, getting errors when trying to install the windows updates... tried all Microsoft fixed, no results, error 80070643 and 8024AFFF

  Installation and update of Windows Vista are no longer works... I tried all Microsoft fixed... nothing helps... continue to get errors and no installation, please help...

  Thank you

  Hello

  Do the following and check:

  Step 1:

  Try to do a Scan of the SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exe file and select 'run as administrator '.
  (d) in the CMD window, type: sfc/scannow and press the Enter key.
  (e) restart and see if that solves the problem.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  If the problem persists, you can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.

• "Failure of configuration of the windows updates". error: WindowsUpdate_80070003 / 0 x 80070003

  Original title:

  "Failure of configuration of the windows updates".

  Hello

  I use Windows 8 and updated to 8.1 last month after graduating from the messages on HP laptop. As soon as I updated to 8.1 it stopped working correctly. It has become very slow and I was unable to perform any task. I went back to Windows 8, once I had this option. Since then, I get this error message «Failure of configuration updates windows.» Restoration of the changes. Do not turn off your computer. »

  I also tried the clean boot troubleshooting mentioned here: http://support.microsoft.com/kb/929135

  However, I get this error: WindowsUpdate_80070003 / 0 x 80070003

  Please help ASAP!

  Hi John,.

  I will try to help you with this question.

  Thank you for the information provided. Coming to the question I would like you try these steps and check if that helps.

  Method 1:

  Try the steps from the following link and check if that helps.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  If you still experience the issue after trying the steps in the above link, try the following steps:

  Method 2:

  See the following article try the steps that you have not yet tried and check if that helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358 

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Make sure that you back up the data on the computer before performing all the troubleshooting steps.

  Method 3:

  If the previous step fails then please go ahead and try the following steps:

  I suggest to rename the pending.xml file, and then change the registry.

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting, and then select Advanced Options.

  d. Select the prompt option.

  e. Once you open the command prompt, enter the following command and press ENTER.

  f. type cd C:\windows\winsxs, and then press ENTER.

  g. type ren pending.xml pending.old, and then press ENTER.

  h. system cannot find the specified files

  i. type regedit and press ENTER.

  j. select HKEY_LOCAL_MACHINE.

  k. on the file menu, click on load the hive.

  l. find the following folder:
  C:\windows\system32\config\components

  Mr. When you are prompted for a name, type Offline_Components.

  n. in the registry editor, locate and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HLKM\Components\AdvancedInstallersNeedResolving
  HKLM\Components\PendingXmlIdentifier
  HKLM\Offline Components\PendingXmlIdentifier

  o. quit the registry editor, type exit at the command prompt, and press ENTER.

  p., click on restart.

  
  Note: the steps mentioned below include editing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Please return to the State of the question.

• default configuration of the windows updates, coming back from updates.

  whenever I start my computer, it says "failed to configure windows updates, returning changes." It wont even let me start normally. HELP ME PLEASE!

  Hi Chrisuzumaki,

  This problem could occur due to these reasons.

  • Corrupt Windows Update components.
  • Conflict between third-party applications or external devices.

  Note If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try the procedure described in the article and check:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates 

  Note:

  1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  2. Please do not perform upgrade in-place or reinstalling Windows.
  3. After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  You may also see suggestions provided by Srimadhwa B responded on January 16, 2014 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-Update-reverting/07666a58-a9d7-45FA-bb61-4c7a43942680

  Please answer us on the State of the question to help you further.

• Configuration of the windows updates failed, returning error Exchange

  I have a laptop windows 8.  Whenever I run windows updates, I get the error message "failed to setup of the windows updates, returning error changes.  I tried the windows update troubleshooting tool and download the updates manually but still no change.   Is there a solution to this?

  Thank you.   Often, when I try to run windows updates I get error like 80242FFF codes; 800703F1.

  Hi Zurkon,

  Thank you for your update on the issue.

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing. Windows has tools that can help you solve this problem of troubleshooting. I would suggest trying the following methods and check if the problem persists.

  Method 1: Run the Windows Update Troubleshooter

  • Run the Windows Update utility, then open Windows Update and try installing the update again.

  Method 2: Run the DISM tool

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click Find.)

  2. Enter command prompt in the search box.

  3. In the list of results, slide down on or right click command prompt, and then press or click Run as administrator.

  4. In the administrator: command prompt window, enter the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exit and press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Error to the Windows Update page.

  This message appears on the Windows Update page after clicking on the Express button. "The website has encountered a problem and cannot display the page you are trying to display." There is no error code.

  Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
  http://support.Microsoft.com/kb/958053

  http://support.Microsoft.com/kb/914226
  Windows Update has encountered an error and cannot display the requested page.
  In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page.

• The Windows Update site is down?

  I just tried to run the update of Windows, and he says that the site cannot be displayed.  Is the site down temporarily, or is there a problem with my computer?

  Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
  http://support.Microsoft.com/kb/958053

  Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
  http://support.Microsoft.com/kb/914226
  Windows Update has encountered an error and cannot display the requested page.
  

• 0x800A0046 error when you go to the Microsoft Update site.

  Original title : How can I correct the ox800A0046 error

  When I arrived at the Microsoft Update web site it gives me Ox800A0046 error code when I try to follow the instructions, it does not.

  Hello

  I suggest you try the steps from the link below and check if it helps.

   Error message when you visit the Windows Update Web site or the Microsoft Update Web site: "0x800A0046": http://support.microsoft.com/kb/910338

  Hope this information is useful.

• error code 57 when executing that Windows update

  I get the error code 57 and the 8024200d error code when you try to run Windows update

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  If it's office updates maybe try to install office with the installation media updates in the installation drive.

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.