. Audio OGA works very well with local files, is to play at the remote site.

Similar Questions

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• I have CS6 Design Standard, I'm going to update my iMac, the new iMac runn OSX 10.10 and 10.11, CS6 works very well with it. Kindly advice.

  I have CS6 Design Standard, I'm going to update my iMac, the new iMac runn OSX 10.10 and 10.11, CS6 works very well with it. Kindly advice.

  Hello

  Please try system requirements | Adobe Creative Suite Design Standard

  Concerning

• Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Version 13 capture is more than one camera to tape

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• Webhelp generated from Robohelp 7 doesnot work very well with Google Chrome

  Why is generated Webhelp of Robohelp 7 doesnot work very well with Google Chrome? Are there problems with compatibility with browsers for Google Chrome? Please let me know how to fix it.

  When you say that it does not open, I think is not quite that it opens at all, but the skin appears without any content or the navigation pane.

  Google Chrome will normally only work if aid is located on a web server. Solutions covered in the link provided.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.

• I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let you go ahead and do the upda

  I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let him go ahead and do the update before using the program. It only updated, then restarts first elements 13. As soon as the program loads, I again get the message that 13.1 update is available. How to stop the happy ground?

  RTA,

  Thank you very much for your answers. As you suggest, I went to the help/updates and found that 3 points were scored update, Manager, 13 Photoshop and first elements 13 elements. On a hunch, instead uncheck one of them, I thought I'd see what would happen to let update all 3. It took a while, but, long story short, stopped the happy Vangogh and everything seems fine. Thank you for your messages, much appreciated.    Walt Maken

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• GasBuddy web site not working properly with firefox, but works very well with Explorer

  I noticed when I load the site gasbuddy.comweb, it does not work properly. It does not load, simply do not perform as it should. When I try to use gasbuddy.com to explore 9, it works very well. I already tried to work in safe mode and it does not solve the problem with gasbudy.com. Any suggestions on how to solve the problem? I made a discovery, and I'm very careful about deleting my cookies. It seems that when I do the procedure, I'm losing too much info on some web sites - weather.comweatherunderground, etc.. Just do not know how to delete cookies for a problem with the cause of other problems? Thank you.

  Could check you your zoom here:

  ALT + v (open the menu Classic view) > Zoom > Zoom text only

  If I have this on (checked) then the middle column moves to the right and superimposed on the right column. If I have that turned off, then the page zoom correctly.

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• Local area 2 connection disconnects, but works very well with active VPN. Wireless works well?

  Hello. I just encountered a problem which disconnects me on the net on my desktop PC. Other material in the House connect to wireless very well, discarding the router or my ISP.

  Strangely, when I activate the VPN service there is a connection on the desktop PC. As I turn off again, I see the Local 2 (TAP-Win32 Adapter V9) network connection are disconnected. I checked the properties of the connection once work and does not, and they look identical. I did a full scan of the PC of malware etc, but nothing came.

  Any help or advice on what information I need to provide this forum for help with this diagnosis would be greatly appreciated.

  Hi André,.

  What is the brand and model of the computer?

  I suggest you to uninstall and reinstall the network drivers and check.

  Follow these steps to uninstall the network drivers.

  a. press the Windows key + R and select devmgmt.msc and press enter.

  b. search for NIC and expand it.

  c.       Right-click on the network driver , then select Uninstall.

  Now, go to the manufacturer's website to download the network drivers, install the drivers and check out them.

  Reference:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results of the question.

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• I can no longer print Windows Photo Viewer printer works very well with all the other prog

  My Epson printer has always worked well with the Windows Photo Viewer that I prefer to use.
  A few weeks ago, I ran a computer cleaning prog that I didn't like, and so removed, now I can print from any program except Windows Photo Viewer
  I use Win 7 Home Prem 64 bit

  Hello

  Thanks for the reply.

  Method 1.

  Check that you are doing the default Windows Photo Viewer.

  Try the steps below; It could help us solve the problem.

  1. open default programs by clicking the Start button.

  2. click on Control Panel, and then click default programs.

  3. set your default programs. This option allows to choose the programs that Windows uses by default.

  4. Select Windows Photo Viewer in the list and click Set this program as default.

  5. try to access photo and check if it opens with the Windows Photo Viewer.

  Also access the link to know how to set and change your default programs: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

  Method 2.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Let us know if you need assistance with any windows problem. We will be happy to help you.