Error in el servicio perfil del usuario al iniciar secion. No will can be charged el usuario perfil

Similar Questions

• Desconectado del VCenter ESX host y no will can volver a connect

  Hola

  Tengo an ESX than estaba tan tranquilo, running sin problemas y of repent al registarle una VM in el inventario...-> disconnected pufff.

  Las maquians not be han visto afectadas, y los users follow trabajando.

  Tengo acceso por PuTTY y por VIC directo al ESX, pero no puedo anadirlo (connect o anadirlo) al VCenter: "unable to communicate with the host specified. Maybe it's because the host is not available on the network, there is a problem with the network configuration or management on the host services do not react"

  He intentado:

  REINICIAR el vmware go: restarting the service mgmt-vmware-> nada

  REINICIAR el vpxa: restarting the service vmware-vpxa-> nada

  He even eliminado officer el para lo nuevo instalara-> nada

  Los connects without any error desagradavel muestran.

  Tengo espacio in las particiones

  No hay any core dump reciente.

  Alguien tiene alguna idea of as mirar mas? No quiero tener as plan una parada 20 maquinas para reiniciar el ESX

  Saludos

  If upon esta u otras answer useful, por favor considered el puntos seleccionando respuesta correcta o util como asignar

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

  A¿te el acceso al host directly desde el VIC works? ES decir, al access ESX, utilizando el VIC y usuario/contrasena root.

  The case of ese, that agregado al inventario a VM exist? In ese caso, brought desregistrarla y desde el VIC apuntando el contra VirtualCenter, brought reconectar el host...

  Saludos.

  Xavier

  VCP4 and professional VCP3 certified VMware.

  -

• My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.

  My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.  I can not get to the windows screen, cannot get in safe mode, only the BIOS screen. I managed to get the Samsung recovery screen once, but he said that he did not find the repair disc in! Help, please?

  It is possible that your hard drive is damaged. You can download Windows recovery disk (if you haven't) and run Startup Repair this one.

• error code to remove the Dell Wireless LAN card utility

  I'm moving from VISTA to Windows 7 and I can't remove the utility of LOCAL network error Dell Wireless card, I couldn't remove the control panel nor.

  Hi orionhunter,

  (a) what is the error code? Error code would help us a lot to identify the problem and provide specific troubleshooting steps to solve the problem.

  Try to remove the card Wifi from Dell in the clean boot state .

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  
  Follow the steps below to put your computer in a clean boot state:

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. sign the computer by using an account with administrator rights.

  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  
  Note following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click OK and then click on restart.

  Now the system is in a clean boot state.

  Check the link to learn more about the clean boot below:
  http://support.Microsoft.com/kb/929135

  Restart the computer in normal mode when you are finished troubleshooting.

  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Similar question:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/b712a0df-58Fe-4592-afd7-42a2b1ef5a33

• I had a hard drive crash and had to move all the data again. Now, I get an error saying that my Visa is not an authorized version. How can I find the product key to reactivate?

  Vista Product Code question

  I had a hard drive crash and had to move all the data again.  Now, I get an error saying that my Visa is not an authorized version.  How can I find the product key to reactivate?  I don't have the sticker on the back and the software I have does not have the code?  I bought this laptop DELL at Best Buy a little more than a year.

  Thank you.

  Hello

  This problem may occur if you make a significant hardware change. See the link provided below.

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616

  If the OS came preinstalled Dell you may need to contact Dell technical support for assistance.
  http://support.Dell.com/support/topics/global.aspx/support/win7_support/win7_portal?c=us&CS=04&l=en&s=BSD

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be "read".

  I am running Mirosoft Windows XP Professional Version 2002 Service Pack 2

  Before that, I really want to customize my windows and then I search in google "how to customize windows xp visual styles. After that, I follow the 7 steps how to customize. This is the link I will:

  http://www.WikiHow.com/customize-Windows-XP-visual-styles

  Then, after I followed the steps, it asks me to install this: Neowin patch. When I installed it, it says that my OS is not original, but I just reinstalled the last time.

  Are the cause of the problems of the patch that I installed it in the first place?

  Is it related with my OS?
  How to solve this problem?
   
  URGENT!

  Hello

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the Windows XP operating system.

  It would be great if you could answer these questions to help you further.

  1. When you receive this error message, Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be 'read '?

  2 is the issue limited only to Neowin patch installation?

  There could be a conflict of memory with a driver or due to the bad memory or memory.

  I recommend you to check with the activation status of Windows XP.

  a. Click Start.

  b. click on all programs, then accessories.

  c. click System Tools.

  d. click on activate Windows.

  Windows XP Visual Styles, see the steps in the following Microsoft article.

  http://msdn.Microsoft.com/en-us/library/aa289524 (v = vs. 71) .aspx

  http://msdn.Microsoft.com/en-us/library/5d1acks5.aspx

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• An unexpected error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

  This happens everytime I open a session.

  When I started my computer an error code appeared as follows: unexpected ___An error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

  I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

  Hello

  as you have problems with the Dell software, contact Dell

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  or ask in the Forums of Dell Support

• My Dell is power saving mode and will not come out

  My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

  Hi Ma32206,

  Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

  A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

  B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My HDD shows this error: "you must format the disk in the M: drive, until you can use it. You want to format? »

  My HDD shows this error: you need to format the disk in drive M: until you can use it. Format you? 
  Please help me! the hard drive is like my life...
  That's the reason of my existence...
  I need in the data and that i will do everything I have to please :/ someone help me
  Please helpppp!

  Original title: WD hard drive problem! Desperately need help. Please

  Hi Arman,

  Thanks for posting your query in Microsoft Community.

  I would say you can remove the drive letter M: using disk management and assign a different drive for the drive letter and check if it helps you to solve the problem and if the drive works very well.

  To change the drive letter in disk management follow the steps below:

  a. open computer by clicking the Start> Control Panel > system and security> Administrative Tools > computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  c. click the drive that you want to change and then click change drive letter and paths.

  d. do one of the following:

  • For letter an if it has not already received, click Add, click the letter you want to use and then click OK.
  • To change a drive letter, click change, click assign the following drive letter, click the letter you want to use, and then click OK.
  • To remove a drive letter, click Remove, and then click Yes to confirm that you want to remove.

  Additional information:

  Change, add, or remove a drive letter

  In addition, please refer to the steps posted by NakulShridhar responded on October 14, 2011 in the following thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/you-need-to-format-the-disk-in-drive-j-before-you/4e153784-3217-4425-9c39-48030af82a13

  Warning:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

  I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

  Hello

  1. you try to perform a new installation of Windows 7?

  2. where did you buy the Windows 7 DVD?

  This particular message occurs generally if you try to perform an upgrade on the spot of a recovery disc or installation support OEM (Original Equipment Manufacturer) that contains a custom defined configuration and can't stand not running an upgrade installation.

  The message means that you probably need to start using the installation media. You can also contact the manufacturer of your computer to determine the type of installation media that you have and to confirm what options are available when booting from the disc.

  Here are some links that provide additional information about the installation of Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Alternatively, you can consult this article to understand what is Windows PE.

  http://TechNet.Microsoft.com/en-us/library/dd799308 (v = WS.10) .aspx

• Layout error while deploying the application on the glassfish server. Any body can help?

  Mr President.

  Layout error while deploying the application on the glassfish server. Any body can help?

  The server log is

  [2015-06-05T12:05:15.646+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487915646] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:15.646+0500] [glassfish 4.1] [WARNING] [] [javax.enterprise.system.tools.deployment.javaeefull] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487915646] [levelValue: 900] [[
    Exception while locating sub archive: AshCMS_ViewController_webapp.war]]
  
  
  [2015-06-05T12:05:15.706+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=88 _ThreadName=deployment-jar-scanner] [timeMillis: 1433487915706] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:17.484+0500] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487917484] [levelValue: 800] [[
    visiting unvisited references]]
  
  
  [2015-06-05T12:05:23.074+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923074] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:23.074+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923074] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:23.784+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923784] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:23.804+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923804] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:23.804+0500] [glassfish 4.1] [WARNING] [NCLS-DEPLOYMENT-00023] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923804] [levelValue: 900] [[
    Ignoring AshCMS_ViewController_webapp_war/ because the containing archive C:\glassfish4\glassfish\domains\domain1\applications\AshCMS_Project1_AshCMS recorded it as a pre-existing stale file]]
  
  
  [2015-06-05T12:05:23.804+0500] [glassfish 4.1] [SEVERE] [] [javax.enterprise.system.core] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923804] [levelValue: 1000] [[
    Exception while deploying the app [AshCMS_Project1_AshCMS]]]
  
  
  [2015-06-05T12:05:23.804+0500] [glassfish 4.1] [SEVERE] [NCLS-CORE-00026] [javax.enterprise.system.core] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923804] [levelValue: 1000] [[
    Exception during lifecycle processing
  java.lang.IllegalArgumentException: Could not find sub module [AshCMS_ViewController_webapp.war] as defined in application.xml
    at com.sun.enterprise.deployment.archivist.ApplicationArchivist.readModulesDescriptors(ApplicationArchivist.java:560)
    at com.sun.enterprise.deployment.archivist.ApplicationArchivist.openWith(ApplicationArchivist.java:229)
    at com.sun.enterprise.deployment.archivist.ApplicationFactory.openWith(ApplicationFactory.java:232)
    at org.glassfish.javaee.core.deployment.DolProvider.processDOL(DolProvider.java:193)
    at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:227)
    at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:96)
    at com.sun.enterprise.v3.server.ApplicationLifecycle.loadDeployer(ApplicationLifecycle.java:881)
    at com.sun.enterprise.v3.server.ApplicationLifecycle.setupContainerInfos(ApplicationLifecycle.java:821)
    at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:377)
    at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:219)
    at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:491)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$2$1.run(CommandRunnerImpl.java:539)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$2$1.run(CommandRunnerImpl.java:535)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Unknown Source)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$2.execute(CommandRunnerImpl.java:534)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$3.run(CommandRunnerImpl.java:565)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$3.run(CommandRunnerImpl.java:557)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Unknown Source)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:556)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1464)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1300(CommandRunnerImpl.java:109)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1846)
    at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1722)
    at org.glassfish.admin.rest.utils.ResourceUtil.runCommand(ResourceUtil.java:253)
    at org.glassfish.admin.rest.utils.ResourceUtil.runCommand(ResourceUtil.java:231)
    at org.glassfish.admin.rest.utils.ResourceUtil.runCommand(ResourceUtil.java:275)
    at org.glassfish.admin.rest.resources.TemplateListOfResource.createResource(TemplateListOfResource.java:328)
    at org.glassfish.admin.rest.resources.TemplateListOfResource.post(TemplateListOfResource.java:163)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.glassfish.jersey.server.model.internal.ResourceMethodInvocationHandlerFactory$1.invoke(ResourceMethodInvocationHandlerFactory.java:81)
    at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher$1.run(AbstractJavaResourceMethodDispatcher.java:151)
    at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.invoke(AbstractJavaResourceMethodDispatcher.java:171)
    at org.glassfish.jersey.server.model.internal.JavaResourceMethodDispatcherProvider$ResponseOutInvoker.doDispatch(JavaResourceMethodDispatcherProvider.java:152)
    at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.dispatch(AbstractJavaResourceMethodDispatcher.java:104)
    at org.glassfish.jersey.server.model.ResourceMethodInvoker.invoke(ResourceMethodInvoker.java:387)
    at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:331)
    at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:103)
    at org.glassfish.jersey.server.ServerRuntime$1.run(ServerRuntime.java:271)
    at org.glassfish.jersey.internal.Errors$1.call(Errors.java:271)
    at org.glassfish.jersey.internal.Errors$1.call(Errors.java:267)
    at org.glassfish.jersey.internal.Errors.process(Errors.java:315)
    at org.glassfish.jersey.internal.Errors.process(Errors.java:297)
    at org.glassfish.jersey.internal.Errors.process(Errors.java:267)
    at org.glassfish.jersey.process.internal.RequestScope.runInScope(RequestScope.java:297)
    at org.glassfish.jersey.server.ServerRuntime.process(ServerRuntime.java:254)
    at org.glassfish.jersey.server.ApplicationHandler.handle(ApplicationHandler.java:1028)
    at org.glassfish.jersey.grizzly2.httpserver.GrizzlyHttpContainer.service(GrizzlyHttpContainer.java:365)
    at org.glassfish.admin.rest.adapter.RestAdapter$2.service(RestAdapter.java:316)
    at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:179)
    at com.sun.enterprise.v3.services.impl.ContainerMapper$HttpHandlerCallable.call(ContainerMapper.java:459)
    at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:167)
    at org.glassfish.grizzly.http.server.HttpHandler.runService(HttpHandler.java:201)
    at org.glassfish.grizzly.http.server.HttpHandler.doHandle(HttpHandler.java:175)
    at org.glassfish.grizzly.http.server.HttpServerFilter.handleRead(HttpServerFilter.java:235)
    at org.glassfish.grizzly.filterchain.ExecutorResolver$9.execute(ExecutorResolver.java:119)
    at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeFilter(DefaultFilterChain.java:284)
    at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeChainPart(DefaultFilterChain.java:201)
    at org.glassfish.grizzly.filterchain.DefaultFilterChain.execute(DefaultFilterChain.java:133)
    at org.glassfish.grizzly.filterchain.DefaultFilterChain.process(DefaultFilterChain.java:112)
    at org.glassfish.grizzly.ProcessorExecutor.execute(ProcessorExecutor.java:77)
    at org.glassfish.grizzly.nio.transport.TCPNIOTransport.fireIOEvent(TCPNIOTransport.java:561)
    at org.glassfish.grizzly.strategies.AbstractIOStrategy.fireIOEvent(AbstractIOStrategy.java:112)
    at org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.run0(WorkerThreadIOStrategy.java:117)
    at org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.access$100(WorkerThreadIOStrategy.java:56)
    at org.glassfish.grizzly.strategies.WorkerThreadIOStrategy$WorkerThreadRunnable.run(WorkerThreadIOStrategy.java:137)
    at org.glassfish.grizzly.threadpool.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:565)
    at org.glassfish.grizzly.threadpool.AbstractThreadPool$Worker.run(AbstractThreadPool.java:545)
    at java.lang.Thread.run(Unknown Source)
  ]]
  
  
  [2015-06-05T12:05:23.814+0500] [glassfish 4.1] [SEVERE] [] [javax.enterprise.system.core] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487923814] [levelValue: 1000] [[
    Exception while deploying the app [AshCMS_Project1_AshCMS] : Could not find sub module [AshCMS_ViewController_webapp.war] as defined in application.xml]]
  
  
  [2015-06-05T12:05:30.224+0500] [glassfish 4.1] [INFO] [] [org.jvnet.mimepull.WeakDataFile] [tid: _ThreadID=42 _ThreadName=admin-listener(2)] [timeMillis: 1433487930224] [levelValue: 800] [[
    File C:\Users\TANVIR\AppData\Local\Temp\MIME4440540335098498486.tmp was not delet
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  ed]]
  
  

  Any body can help to find the error.

  Because I'm not able to find the error.

  Concerning

  As indicated in the supported link you must use Glassfish 3.1 NOT Glassfish 4