error in home 9.2

Similar Questions

• Activation Vista Edition error code Home Premium: 0xC004E003

  I get the following error when I try to activate Vista Home Premium

  "Year error has occurred."
  Code: 0xC004E003
  Description:
  The Software Licensing Service reported that the license evaluation failed"

  I'm reinstalling mutiple viral infections.

  I tried all the articles pertaining to this error and they all point ot telephone activation but I am never presented with this option.

  Any help would be appreciated.

  The macaron is Home Premium, you can not read the key from the sticker, I called Dell they had me to download a program that I ran and it displays the key but would not offer any other medium after that unless I paid for it.

  I'm tired of dead-ends with Dell support and microsoft, so I've upgraded to Vista business in which I have a VLK for and everthing works.

  After talking to my daughter more in detail, Dell had its update of the bios that now more logical as to why it would not activate but because the computer is no longer under warranty they help also.

  anyway thanks for the help guys.

• Apple TV in error 'enable home sharing '.

  Years, I got an AppleTV on each of our 3 TV.  I have them, then connect via "Computers" to my iMac which is running iTunes and my library of movies more than 2,000 movies.  I've never had a problem with the part 'Computers' on the AppleTV not just have all my movies, music and TV he meet and watch.  However, I just moved and since then almost every time I want to watch a movie on my computer to the AppleTV article it says that my home sharing is not enabled.  Which is not at all the case.  Sharing my house is ALWAYS on.  And I let my iTunes always run continuously (I learned that when I set all this up - it won't work without being on my iMac iTunes).  I had this running correctly for years and now it does not work.  If I go on my iMac and unsleep-so I quit iTunes, then open it again - then everything rises.  It's very embarrassing and I know that's not the way it is supposed to work.  Any advice would be GREATLY appreciated.  Thank you!

  iMac (27-inch, late 2013) running the Version OS X El Capitan 10.11.5

  AppleTV - model A1427 software Apple TV 7.2.1 (8011)

  iTunes version 12.4.1.6

  Other users, including myself, have posted on this issue, but no solution yet.

  Please inform Apple this bug via this link http://www.apple.com/feedback/

• Code 31 error - Vista Home premium Service Pack 2 - 32-bit

  I have an error code 31 on my LAN adapter wireless, network Nvidia Controller and 3 different miniports of WAN (IP, IPv6 & Network Monitor). When I try to update Windows tells me that the drivers are up-to-date

  I downloaded the new drivers for the LAN Controller and wireless network. I uninstall the current drivers, look at changes Hardware, Go to install the drivers but Windows tells me its found but the driver software encountered an eroor while installing - the system cannot find the specified file

  Please help my computer is unable to connect to internet at all the

  Networking opened in the Control Panel, select manage network connections, you must open the wireless

  Properties of the connection. If show its unlisted, but more connection or lan, then disable them. Reach

  youre pc mfg & download the software/driver wireless website, this allows the controller to use. In addition, chk this

  Microsoft link for this error.

  https://social.technet.Microsoft.com/search/en-us?query=Windows%20Vista%20wireless%20Connection%20Code%2031&AC=5

• Error 1305 error for home and Landscape Design Premium

  Try to install this program and do not know how to fix this error

  Error 1305 error reading from c:\Program Files (x 86) \Punch! House and land Premium 16\Tutorials\tools5713\tool7513.mp4. Verify that the file exists

  Hello

  I suggest you try this method and check the status of the issue.

  Error message when you install a Microsoft game or a mapping program (ignore the title).

  http://support.Microsoft.com/kb/258496

  You can also read the following article and check if it helps:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Installation of Oracle 11 g on windows, error: specified home was not found in the registry

  Hi gurus,

  I installed 11 GR 2 on windows server 2012, due to certain constraints I uninstalled the software of oracle 11 g,

  again I tried to install 11 GR 2, but got error like "ORA-12543: TNS:destination unreachable host"

  After getting this error, I removed all the registers of the oracle. now try to install oracle 11 g 2.

  After 88% am getting error "shown at the reception was not found in the registry.

  Thanks in advance.

  Thanks and greetings

  REDA

  If you want to re-evaluate 11.2.0.4, you will need a support contract paying since 11.2.0.4 is available on MOS.

  The other option would be to install 12cR1 - tasks of preinstallation of Oracle databases - which is available at Oracle Database Software Downloads | Oracle Technology Network | Oracle

  For other options, pl contact your Oracle sales team

• Files missing error on home page

  Hey there,

  I've recently updated my Muse the latest version and since I published my site I get this error message on my homepage:

  "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  There is no file missing in my property that I see. The page is www.steannes.com

  I publish my site to Business Catalyst. Any ideas?

  Well don't know what it was but I did an entire third site publish today and the problem disappeared.

• First update error Windows Home

  Our PC is stuck in a loop. He started the update to stop down as usual, then this message "update 3/3 0% do not turn off your computer"it stop and immediately began to restart. However, instead of starting up as normarl the message come again and it turn off started it to reboot. He did this for more than an hour. We have tried to start in safe mode, but it doesn't work anymore. How to stop and restart correctly?

  Debbiedennick,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  06/20 / 1102:25:07

• Help! Modem error

  Hi, when I try to start my internal modem I get this error (WXP Home SP2):
  The modem log
  -Type of modem: TOSHIBA Software Modem AMR
  -Modem inf path: oem22.inf
  -Modem inf section: INTEL_AMR. Modem
  -Matching hardware ID: PCI VEN_8086 & dev_24c6 & subsys_00011179
  -Opening the modem device failed with error 000005aa

  COM open
  The port that the modem is attacched could not be opened. This can be the result of a hardware conflict.

  Connection to IOLFREE error
  Check the Device Manager to verify all devices are functional.
  ERROR 603: The modem (or other device connectin) is all ready in use or is not configured properly
  I check in the Device Manager without found any conflict and reinstalled the driver
  T.Y

  Hello

  Modems troubleshooting is a little tricky. Error messages are of course, but I don't pay much attention to them in the event of communication problems.
  You hear the tone of the telephone line when you try to connect? The modem dials the number? If Yes, on these 2, see network settings, secuity settings.

  However, I guess based on the error message that you did not hear the tone of phone line. In this case, the real hunting begins. First consider whether you have installed a few old communication software, perhaps for a laptop, maybe for an old printer or scanner that does not connect via USB. If you did, try first unistall all those.
  Did you install or configure any other communication software which may involve COM ports? Think back and undo these settings.
  If all else fails, if you do not find the problem in or by resetting unistalling then there are 2 options:
  - either the software is so changed that you can not change it back without being a supernatural person with psycic abilities. My suggestion - pick up the machine! Check the modem DIRECTLY after recovery. Do not install any other software before that. If it works, then install the additional software one by one and check the operation of the modem between each packet.

  -If the above does not help probably your modem is faulty. Turn the service.

  Best regards

  Tom

  Post edited by: Tom Mannerhagen

• Slacker error

  I get "error: a network error occurred" trying to play Slacker on my HID - C10 for several days. It is not a network error local because the works of Pandora and I get the same error at home and work.

  
  

• The unit - error message

  After installing the 4.0 unit (4) SR1, I loose any all users, but I'm looking for a way to disable greeting error for all users.

  If I disable the message error home either through the SA or the Advanced Settings tool, the appellant will be disconnected if an invalid entry is detected during greeting subscribers. Not sure if this is a bug, but I can't find one in the browser Bug.

  The installation of the last unit that I did I had to manually open all subscribers error greetings and put them to loop back to their own greetings. It is very time consuming.

  Is there a way to disable the error message home w/o disconnection to the appellant or to make a big change to all subscribers greetings from error to have looped to the own greeting subscribers instead of opening of wishes?

  Thank you

  -Ryan

  You can't disable the greeting of the error. He must be active to treat the error handling.

  BulkEdit has a special option just for what you want (the option "loop back to itself") - you can easily remap everyone greeting error loop on itself in a single shot.

• Use the error report data store capacity

  Hello world

  When I try to get the report for a capacity of data store, I got an error like home but he had no explanation for the error.

  Does anyone know why I get this error? I've updated vCOps from 5.0.3 to 5.6. Maybe it has to do something with that.

  Thank you in advance.

  Thanks for the replies;

  I mean by object parent exactly your situation - this is the under(inside?) folder.

  If you can, try to move a data store on the file and reports should work for it.

  in any case, it is a known problem that will be fixed in the next version of update.

• error emctl start dbconsole

  Hi friends,
  
  I start my OEM services that are the ff.
  

  home/oracle/OracleHomes/agent10g/bin/emctl start agent
  /home/oracle/OracleHomes/oms10g/opmn/bin/opmnctl startall
  /home/oracle/OracleHomes/oms10g/bin/emctl start iasconsole
  /home/oracle/OracleHomes/oms10g/bin/emctl start oms

  The program above runs correctly.
  But the following error:

  /home/oracle/OracleHomes/agent10g/bin/emctl start dbconsole
  Unable to locate web application configuration from .

  Or if I use the emctl under the House SGD:

  home/oracle/OracleHomes/oms10g/bin/emctl start dbconsole
  OC4J Configuration issue. /home/oracle/OracleHomes/oms10g/oc4j/j2ee/OC4J_DBConsole not found.

  How to solve this please...
  
  Thank you very much
  
  Ms. K

  Hello

  In case of GRID, there is no need to start dbconsole, and even that is not taken care...

  Concerning
  Rajesh

• Is this possible? Should I worry or not?

  Hi I have chosen in error Vista Home Premium instead of base. How can I change this info in my computer? Thanks in advance.

  Hello

  To change the operating Systen editions, you reinstall with the correct operating system edition.

  You cannot change it to a mouse click.

  And you can only install and activate the edition of the operating system that you paid for.

  If you bought Vista Basic, that's all, that you are authorized to use.

  See you soon.

• Promlems with SDL in Blackberry IDE installation

  Hello

  I'm pretty new to bleckberry and I get the following when I try to run the build_for_playbook.sh script:

  ## ----------- ##
  ## Core tests. ##
  ## ----------- ##
  
  configure:2872: checking for arm-unknown-nto-qnx6.5.0eabi-gcc
  configure:2899: result: /opt/RIM/bbndk/host/linux/x86/usr/bin/qcc -V4.4.2,gcc_ntoarmv7le_cpp
  configure:3168: checking for C compiler version
  configure:3177: /opt/RIM/bbndk/host/linux/x86/usr/bin/qcc -V4.4.2,gcc_ntoarmv7le_cpp  --version >&5
  cc: unknown option: '--version'
  configure:3188: $? = 1
  configure:3177: /opt/RIM/bbndk/host/linux/x86/usr/bin/qcc -V4.4.2,gcc_ntoarmv7le_cpp  -v >&5
  cc: looking for gcc_ntoarmv7le_cpp in /opt/RIM/bbndk/host/linux/x86/etc/qcc/gcc/4.4.2/gcc_ntoarmv7le_cpp++.conf
  cc: looking for gcc_ntoarmv7le_cpp in /opt/RIM/bbndk/host/linux/x86/etc/qcc/gcc/4.4.2/gcc_ntoarmv7le_cpp.conf
  cc: no files to process
  configure:3188: $? = 1
  configure:3177: /opt/RIM/bbndk/host/linux/x86/usr/bin/qcc -V4.4.2,gcc_ntoarmv7le_cpp  -V >&5
  cc: no targets defined in /opt/RIM/bbndk/host/linux/x86/etc/qcc/gcc/4.4.2/4.4.2!
  configure:3188: $? = 0
  configure:3177: /opt/RIM/bbndk/host/linux/x86/usr/bin/qcc -V4.4.2,gcc_ntoarmv7le_cpp  -qversion >&5
  cc: unknown option: '-qversion'
  configure:3188: $? = 1
  configure:3208: checking whether the C compiler works
  configure:3230: /opt/RIM/bbndk/host/linux/x86/usr/bin/qcc -V4.4.2,gcc_ntoarmv7le_cpp   -g  -D__PLAYBOOK__ -D__QNXNTO__ -I /home/boris/SDL/../TouchControlOverlay/public  -L/home/boris/SDL/../TouchControlOverlay/Device-Debug -lTouchControlOverlay -L/opt/RIM/bbndk/target/qnx6/armle-v7/lib -L/home/boris/SDL/playbook_prefix/lib -lscreen -lasound -lpps -lm -lpng14 -lbps -lxml2 -lEGL -lGLESv2 conftest.c  >&5
  /home/boris/SDL/../TouchControlOverlay/Device-Debug/libTouchControlOverlay.so: undefined reference to `navigator_get_domain'
  /home/boris/SDL/../TouchControlOverlay/Device-Debug/libTouchControlOverlay.so: undefined reference to `screen_get_domain'
  cc: /opt/RIM/bbndk/host/linux/x86/usr/bin/ntoarm-ld error 1
  configure:3234: $? = 1
  configure:3272: result: no
  configure: failed program was:
  | /* confdefs.h */
  | #define PACKAGE_NAME ""
  | #define PACKAGE_TARNAME ""
  | #define PACKAGE_VERSION ""
  | #define PACKAGE_STRING ""
  | #define PACKAGE_BUGREPORT ""
  | #define PACKAGE_URL ""
  | /* end confdefs.h.  */
  |
  | int
  | main ()
  | {
  |
  |   ;
  |   return 0;
  | }
  configure:3277: error: in `/home/boris/SDL':
  configure:3279: error: C compiler cannot create executables
  See `config.log' for more details
  

  I don't know what I'm doing wrong. Thanks in advance.

  boris812 wrote:

  1.0

  NDK 1.0 to pick up its target-override and libbps headers. You will also need to package libbps.so.1 in your file bar.  Note that this should not be done for 2 NDK.

  Add the path to your include parameters (- I):

  $QNX_TARGET/../target-override/usr/include
  

  Add the following settings libpath path (-L):

  $QNX_TARGET/../target-override/$CPUVARDIR/usr/lib
  

  where $CPUVARDIR is x 86 or armle-v7 depending on whether you are building for Simulator or device. CPUVARDIR is a makefile in the recursive QNX Makefile system variable, I do not think that you are using.

  Add the following code to your bar - descriptor.xml:

  lib/libbps.so.1
  

  If or when you migrate to NDK 2, you will have to remove this line from the bar - descriptor.xml.  The additions of include and lib paths are harmless in 2 NDK.