error in the syntax of the trigger
Drop trigger hp_backup_check;create or replace trigger hp_backup_check
AFTER INSERT on hp_patient_record
FOR EACH LINE
BEGIN
INSERT INTO hp_backup_record
values (: old.record_id,: old.patient_name,: old.patient_age,: old.admit_department, sysdate, user of double);
END;
/
I get an error message like
PL/SQL: SQL statement ignored
PL/SQL: ORA-00917: Missing comma
Please please help
INSERT INTO hp_backup_record
select :old.record_id, :old.patient_name, :old.patient_age, :old.admit_department, sysdate, user from dual;
OR
INSERT INTO hp_backup_record
values(:old.record_id, :old.patient_name, :old.patient_age, :old.admit_department, sysdate, user );
Tags: Database
Similar Questions
-
Hello
I get an identifier not valid error a.status_id the shutter button below.
Published by: 872435 on July 2, 2012 02:15create or replace trigger TG_RCI_BSR_STATE_CH after insert on RCI_BSR_STATE_CH for each row declare CNTROW Number; FlgAction Boolean; ActionId Number; StatusId Number; Begin If inserting Then Insert Into rci_bsr_state_aud Values (:new.i_bsr_state_id, :new.i_state, :new.bsr_state_id, :new.action_id, :new.status_id, :new.eby, :new.cby, :new.ts_eby, :new.ts_cby, :new.remarks, :new.b_deleted); select :old.i_bsr_state_id , :old.i_state , :old.bsr_state_id , :old.action_id , :old.status_id , :old.eby , :old.cby , :old.ts_eby , :old.ts_cby , :old.remarks , :old.b_deleted from dual a Where a.status_id = 3; End If; end TG_RCI_BSR_STATE_CH;
The error comes, because DOUBLE does no a.status_id column.
I guess you want to check: old.status_id = 3 or: new.status_id = 3, but you need to know that.
-
The Trigger whith sdo_relate syntax
Hello world
I try to set a trigger that Oracle can retrieve a value from a table from its geographical position.
I have two tables:
-The first "FAIT_LC" of type point with the following fields (id_fait, id_quartier geometry)
-A second "QUARTIER_LC" of type surface with the following fields (id_quartier, geometry)
The trigger performs the following operation:
She retrieves the value table id_quartier "QUARTIER_LC" where "fait_lc" is included (via sdo_relate).
My trigger syntax is:
create or replace trigger FAIT_ID_QUARTIER_TRG before update geometry
on FAIT_LC
REFERRING AGAIN AS NINE OLD AND OLD
for each row when (new.geometrie is not null)
declare
number of id_quartier;
/***************************************
the field geometry in automatic power supply
***************************************/
Start
Select quartier_lc.id_quartier in the quartier_lc id_quartier where sdo_relate (quartier_lc.geometrie,:new.geometrie, 'mask contains =') = 'TRUE '.
: new.id_quartier: = id_quartier;
end;
Relaxation compiles successfully.
When running, the following error message is returned:
ORA-29902: error running routine ODCIIndexStart)
ORA-13208: internal error in the evaluation of the operator SRID window does not match the SRID layer
ORA-06512: at the 'MDSYS. SDO_INDEX_METHOD_10I', line 286
ORA-06512: at "OBS_DELINQ. FAIT_ID_QUARTIER_TRG', line 8
ORA-04088: error during execution of trigger ' OBS_DELINQ. FAIT_ID_QUARTIER_TRG'
columns 'geometry' are present in both tables.
both tables have a spatial index.
Do you have any idea of what might make this mistake in this trigger?
Thanks in advance.
Kind regards...I see no problem when executing the following SQLs with your relaxation:
create table FAIT_LC (sdo_geometry geometry, number of id_quartier);
create the table quartier_lc (sdo_geometry geometry, number of id_quartier);
insert into quartier_lc values (SDO_GEOMETRY (2003, 41015, NULL, SDO_ELEM_INFO_ARRAY (1, 1003, 1), SDO_ORDINATE_ARRAY (784796.962, 112706.409, 784634.62, 112739.634, 784595.209, 112733.447, 784538.154, 112746.393, 784519.365, 112747.081, 784455.322, 112736.082, 784312.227, 112725.428, 784300.312, 112715.002, 784243.945, 112713.742, 784240.393, 112411.284, 784240.049, 112387.454, 784287.366, 112129.333, 784314.518, 112098.056, 784331.36, 112064.946, 784352.44, 112065.977, 784360.804, 112079.496, 784384.748, 112079.496, 784387.956, 112144.227, 784490.609, 112140.332, 784490.379)) (((, 112131.281, 784504.929 112131.281, 784646.306, 112127.958, 784652.607, 112125.209, 784718.827, 112113.064, 784796.962, 112706.409)), 1);
insert into fait_lc values (SDO_GEOMETRY (2001, 41015, SDO_POINT (784461.793, 112634.488, 0), NULL, NULL), 0);
Insert in user_sdo_geom_metadata values ("QUARTIER_LC", "GEOMETRY",
SDO_DIM_ARRAY (SDO_DIM_ELEMENT ('X', 0, 1000000, 0.001), SDO_DIM_ELEMENT ('Y', 0, 1000000, 0.001)), 41015);create indexes idx on quartier_lc (geometry) indextype is mdsys.spatial_index;
create or replace trigger FAIT_ID_QUARTIER_TRG before update geometry
on FAIT_LC
REFERRING AGAIN AS NINE OLD AND OLD
for each row when (new.geometrie is not null)
declare
number of id_quartier;Start
Select quartier_lc.id_quartier in the quartier_lc id_quartier where sdo_relate (quartier_lc.geometrie,:new.geometrie, 'mask contains =') = 'TRUE '.
: new.id_quartier: = id_quartier;
end;
/Select * from fait_lc;
updating geometry set fait_lc = SDO_GEOMETRY (2001, 41015, SDO_POINT (784461.793, 112634.488, 0), NULL, NULL);
Select * from fait_lc;
So can you just take the SDO_RELATE query out of relaxation, to see if you can see the same problem?
Published by: you Sep 24, 2009 07:31
-
Downgrade from Windows 7 to XP. "Syntax error in the .sif file.
Every afternoon.
I wasn't totally sure what forum to put this in.
My boss bought a new laptop of A11 - 11: my my line manager and asked that he be demoted to XP and put it on our network. (usually, it didn't network.)
It's Windows 7, so I know that's not easy to downgrade.
I changed the SATA setting in bios compatibility (IDE) and that allowed me to start running the installation CD.
Then, I got this error;
"There is a syntax error in the." SIF file used by Setup Online: 8971.
Setup cannot continue. Stop or restart your computer. »
I have this with 3 different original discs
Looking around without decommissioning is to get rid of all the recovery partitions. So, I have that one hidden and now I have a large main drive to NTFS.
I still get the same error. No recovery disk. Original discs and now I'm totally stumped.
Are there any other settings in the Bios maybe I need to change?
Anyone has an idea what I might try?
See you soon
StuYou should try to install Windows XP Home (SP2 or SP3) using SATA driver to start loading. In this case do not use the compatibility mode but AHCI mode.
Without load the driver (F6 option at startup to install of WXP) SATA disk HARD will be not visible to Windows XP Home edition.
Option of job search on this forum and you will find so many threads on the installation of Windows XP Home on the latest portable Win7 supported. -
Error in the capture of several channels using pre-trigger
I have problems of acquiring data with pre-trigger samples during the capture of several channels, using hardware NOR-PXI-6071E and Analog Input VIs in Labview (inheritance OR-DAQ).
My goal is to trigger a signal, while capturing another. Unfortunately, I can't use the PFI0 for external triggering, as our cables/material have already been built, so I have to use an analog input as the trigger channel. I understand that to do this I must capture the two strings and the string I want to trigger outside must be the first string in the list.
If I trigger and capture on the same channel (I tried 1-4) then it works very well, regardless of the number of samples before relaxation together. If I capture more than one channel (the channel of the relaxation to a first), with no pre-trigger samples, then trigger and capture both work very well. However, if I do the same thing with pre-trigger > 0 sample I get the following error:
Error-10621 to AI control. Possible reasons:
NOR-DAQ LV: The specified trigger signal cannot be assigned to the resource for the trigger.I don't have to such limitation explained in the user manual, and the forum search, I found a few other people who have had the same problem but they had no solutions. Any ideas?
Hi Jackson,
Unfortunately, this is a hardware limitation when you reference analog trigger via one of the lines to HAVE.
Please see this knowledge base. Particularly the second paragraph says
The error-10621 appears immediately when the VI running if you try to assign scans of relaxation before while scanning multiple channels and using one of the entries as your trigger channel.
Details are explained in the third paragraph:
Because all the entries are multiplexed before being sent for analog triggering circuit, it is possible that the trigger on the trigger channel conditions might miss while the device is multiplexing by another channel. In this case, the trigger will not be detected.
It is explained in the E-Series user manual page 10-3. Specifically the second paragraph of the section entitled "Analog Input Channel".
Eric S.
-
Hello
I use the card PCI-6111.
I am trying to acquire analog data on channels dev1/ai0 ai1/dev1 using pulses of external clock connected to the PFI0 channel. I also want to trigger the acquisition, when the channel dev1/ai1 signal reaches certain level. I send a triangle wave channel dev1/ai1, and I need the data only for the front.
I have configured the task in the following ways:
However, I get the error-89137 after function DAQmx Start Task:
Specified route can not be satisfied, because it requires resources that are currently in use by another route.
Source device: Dev1
Terminal of source: PFI0InputLockOut
Target unit: Dev1
Destination terminal: AnalogComparisonEventResources in use by
Task name: _unnamedTask
Source device: Dev1
Terminal of source: PFI0
Target unit: Dev1
Destination terminal: AI/SampleClockTask name: _unnamedTask
If I change the internal clock external clock - switch works. If I pull the trigger, the external clock works, too. But these two tasks do not work together.
Help? Advice? Thank you!
-
Original title: there is an error then that inistalling some programs such as, java, internet download manager and...
There is an error then that inistalling some programs such as, java, internet download manager and...
for example, I want inistall an application or a program like Java, but when I start to inistall, it works like adminstere then said: (Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect.)
It even I mean to inistall Internet download manager and VLC...
my pc is automatically updated and when updates are available whenever I download inistall,.
Please help me, I love my windows Vista, tnx
Hello Aliahriman,
Please look at the post below and see if it will solve your "creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect" question.
He has helped others with a similar issue.
http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/3b180316-95c2-4613-8c38-8515481db22cIf please reply back and let us know if this helps solve your problem.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
ASP - function Remote - error: cannot run the trigger
Hello
I tried to get my macros being run by a remote server.
It's my function file remote named "remote_test_pc.asp":
framework integrated; then
conf t
interface $INTERFACE
Description macro $TRIGGER
PC-VoIP-Port Description
switchport access vlan $ACCESS_VLAN
switchport mode access
switchport vlan voice $VOICE_VLAN
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
no event log status link
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no link-status of snmp trap
spanning tree portfast
spanning tree enable bpduguard
service-policy input PO_TRUST-PHONE
output
end
FI
framework integrated; then
conf t
interface $INTERFACE
No description of macro
Description by DEFAULT-CONFIG
switchport mode access
switchport access vlan 999
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
spanning tree portfast
No switchport voice vlan $VOICE_VLAN
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no service-policy input PO_TRUST-PHONE
FI
output
end
FI
And this is my config on the switch to mac-group and the macro:
!
macro auto Test group address-mac-PC
Mac 0019.9990.5509 address list
!
comprehensive treatment of the auto macro
macro auto control global detection mac address
!
automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127
!
When I plug this workstation for the following syslog messages:
Switch #.
Remote_test_pc.asp loading!
[OK - 1702/4096 bytes]
Enter configuration commands, one per line. End with CNTL/Z.
Switch con0 is now available
Press RETURN to get started.
Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function
26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console
26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message
Switch #.
The port works as it should, but I wonder about the error message.
The switch is 2960 with IOS 12.2 (58) SE2.
Can someone explain what this means?
Thank you very much!
Sven
Hi Sven,
I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.
Thank you
Ankur-
-
Mr President.
What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.
--SL_CUSTOMERS table data INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL); INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL); INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
CREATE SEQUENCE "ALIZA"."SL_CUSTOMERS_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE ; CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS" FOR EACH ROW BEGIN IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN SELECT SL_CUSTOMERS_SEQ.nextval INTO :NEW.CUSTOMER_ID FROM DUAL; END IF; END; /
When I try to insert several records with the seq.nextval it gives error
violation of primary key.
INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd') ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated ORA-06512: at line 1 One error saving changes to table "ALIZA"."SL_CUSTOMERS": Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated ORA-06512: at line 1
Concerning
Mr President.
I find the solution by creating a function before the triiger
as below
CREATE SEQUENCE "ALIZA"."SL_CUSTOMERS_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE ; CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS BEGIN RETURN SL_CUSTOMERS_SEQ.NEXTVAL; END; / CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS" FOR EACH ROW DECLARE dummy VARCHAR2(200); BEGIN dummy := get_SL_CUSTOMERS_vId(); :NEW.CUSTOMER_ID := dummy; END; /
It works very well
Thank you all for the suggestions.
Concerning
-
Hello, I know that an implicit validation occurs before a runtime error.
What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).
Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.
Hello, I know that an implicit validation occurs before a runtime error.
You do? How do you know that? What is the source of your information?
What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).
The syntax is checked at the time of the analysis/compile. Runtime errors occur to, of course, of execution time. You can NOT run sometimes that there are syntax errors.
Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.
Ideally, Oracle has created an entire book of them. Make your choice.
http://docs.Oracle.com/CD/B28359_01/server.111/b28278/TOC.htm
The doc PL/SQL treats Exceptions language and everything that you always wanted to know about them. It also includes examples
http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm
-
I tried to create a window to test the activation of plans of RM. But I get this error.
SQL > EXECUTE dbms_scheduler.create_window.
> (-)
> window_name = > 'day ', -.
> resource_plan = > 'my_plan ', -.
> start_date = > systimestamp + 1 /(24*60).
> repeat_interval = > ' freq = > daily '.
> time = > ' 0 01:00:00 '.
> Comments = > ' C know if it works without a job "-"
>);
BEGIN dbms_scheduler.create_window (window_name = > 'day', resource_p)
LAN = > 'my_plan', start_date = > systimestamp + 1 /(24*60), repeat_interv
Al = > ' freq = > daily ', duration = > ' 0 01:00:00 ', comments = > ' C so she
works without employment '); END;
*
ERROR on line 1:
ORA-27481: 'SYS '. "' DAY ' has an invalid schedule
ORA-27418: syntax error in the interval of recurrence or calendar
ORA-06512: at "SYS." DBMS_ISCHED", line 486
ORA-06512: at "SYS." DBMS_SCHEDULER', line 1295
ORA-06512: at line 1
I have tried many tips found on the web, nothing works.
Any help would be greatly appreciated.
Also, can you pls tell me if this command run once automatically activates the my_plan after 1 minute, 1 minute, after which, it will disable the my_plan? So, you do not need to create a JOB for this. If you create a window, that is, as a job creation to enable an RM plan?
2734369 wrote:
Wow, discovered the issue: the repeat interval is broken (I use a database of 12.1 in Windows 7). It must be uppercase. Very surprising in the windows to be case-sensitive.
SQL >
SQL > EXECUTE dbms_scheduler.create_window.
> (-
> window_name-online 'day ', -.
> resource_plan-online 'my_plan ', -.
> start_date-online systimestamp + 1 /(24*60).
> repeat_interval-online ' FREQ = DAILY; BYHOUR = 10; BYMINUTE = 30', -.
> time-online ' 0 01:00:00 '.
> Comments => ' C know if it works without a job "-"
> );
PL/SQL procedure successfully completed.
Problem is, after 1 minute, always that the plan is not activated?
SQL > SEE THE RESOURCE_MANAGER_PLAN PARAMETER
VALUE OF TYPE NAME
------------------------------------ ----------- ----------------------
resource_manager_plan chain
Why the Plan is not activated after 1 minute. Have we not create a job (I don't think).
I think you misunderstand the meaning of "start_date". Please see the documentation on what this means exactly.
This attribute specifies the first date and time where it is scheduled to open in this window. If the value
start_date
specified is in the past or is not specified, the window opens, from its inception.To repeat windows using an expression of the calendar to specify the repetition interval, the value of
start_date
is a reference date. The first time the window opens depends on the specified repeat interval and the value ofstart_date
.(From Types and Oracle® packages of PL/SQL Database 11g Release 2 (11.2) reference E40758-03); dbms_scheduler, create_window. DBMS_SCHEDULER
Once you have done this, you will see that it is pretty useless to specify that you have.
Your repeat_interval said "every day at 10:30.
-
Form triggers the error when the table trigger fires.
Hi all!
Recently, I had to add a modification_date column to a table accessed in several forms.
In an effort to not modify these several forms, my initial effort was to add an insert/update trigger.
As you can guess, the trigger works as expected, but an error is triggered by each form to the effect that another user has made changes that require a re - interview.
Can anyone suggest an alternative method (short discount - I don't still want to send forms if possible)?
If I am forced to change the forms, SYNCHRONIZE will do?
Alternatively, do I change before insertion and prior update on each form?
Thank you!
Mike
MikeShannon wrote:
.. .my initial effort was to add a trigger for insert/updated to date...... As you can guess, the trigger works as expected, but an error is triggered by each form to the effect that another user has made changes that require a re - interview...
What trigger you added to your table? (Before insert/update; After insert/update?)
So, the "record error updated by another user" occurs after a change has been introduced and the user attempts to edit the record again - is that correct? From your description, it's when I 'think' you get the error. Could clarify you?
You could just refresh your block after validation, but this would require to change your forms - which is what you were trying to avoid. I don't think you'll be able to avoid modifing your forms.
Craig...
-
Code of the trigger with the error table mutation
I have 2 tables, cc_call_lists and cc_call_issues. I have a trigger on the table of cc_call_issues so that when the priority is updated I can determine how to set Issue_Priority.
Basically, the priority update for an Issue_Id I need to update the I want to watch Issue_ids of all the participating on the cc_call_lists table and determine how to update the Issue_Priority column.
Issue_Priority must always be the first priority of the table cc_call_issues for Issue_id records in the cc_call_lists table. So when I need to watch all changes priority priority values for which the Participant has records in the cc_call_lists table and take the max value priority after the record is updated.
Unfortunately, I get the following error message when the trigger is activated:
ORA-04091: table TTMS. CC_CALL_ISSUES is changing, function of triggering/can not see
ORA-06512: at «TTMS.» UPDATEISSUEPRIORITY', line 30
ORA-04088: error during execution of trigger ' TTMS. UPDATEISSUEPRIORITY'
Is there a work around which is not too complicated? Any help would be greatly appreciated.
Table: cc_call_lists
Name
-----------------
PARTICIPANT_TYPE
PARTICIPANT_ID
LAST_ACCESS_DT
LAST_ACCESS_BY
CREATE_DT
CREATE_BY
MODIFY_DT
MODIFY_BY
CALL_STATUS
CALL_PRIORITY
Table: cc_call_issues
Name
-----------------
ISSUE_ID
ISSUE_DESCR
DEACTIVATION_DT
PRIORITY
CREATE_DT
CREATE_BY
MODIFY_DT
MODIFY_BY
Trigger on cc_call_issues code:CREATE OR REPLACE TRIGGER TTMS.UpdateIssuePriority BEFORE UPDATE OF PRIORITY ON TTMS.CC_CALL_ISSUES REFERENCING NEW AS New OLD AS Old FOR EACH ROW DECLARE tmpMaxPriority number:=0; -- Get list of all participants call queue records, existing priority who also have a participant issue record with this issue code cursor c1 is select a.participant_id, a.call_priority from cc_call_lists a, cc_participant_issues b where a.participant_id = b.participant_id and b.issue_id = :new.issue_id and b.issue_status = '001' and a.call_status <> '003'; -- Not closed already BEGIN for thisone in c1 loop -- Get the existing highest priority select nvl(max(b.priority),0) into tmpMaxPriority from cc_participant_issues a, cc_call_issues b where a.issue_id = b.issue_id and a.participant_id = thisone.participant_id; -- Update it if the new priority value is higher than the existing call queue record priority if :new.priority > tmpMaxPriority then update cc_call_lists set call_priority = :new.priority where participant_id = thisone.participant_id; elsif :new.priority < tmpMaxPriority then update cc_call_lists set call_priority = tmpMaxPriority where participant_id = thisone.participant_id; end if; end loop; END UpdateIssuePriority; /
Move the level of LINE at the STATEMENT level triggers, see:
http://www.Oracle-base.com/articles/9i/mutating-table-exceptions.php
http://asktom.Oracle.com/pls/asktom/asktom.download_file?p_file=6551198119097816936 -
trigger error autnomous mutation! Why not allow select in the trigger body?
case 1. a user updates the table and this user has not committed, even fire user select request, he would get an old result. but no error.
case 2. We have table x, trigger appears on the table x as soon as the table is updated to trigger fires. inside the body that we select just for table 'x' it throws error error changing table
can someone please explain why?
my example as follows:
case 1:
CREATE TABLE MyTable
(NUMBER of c1);
INSERT INTO myTable VALUES (1);
commit;
INSERT INTO myTable VALUES (2);
Select * from myTable;
C1
------------
1
case 2:
CREATE TABLE myMaxTable
(maxValue NUMBER);
CREATE TABLE MyTable
(NUMBER of c1);
INSERT INTO myMaxTable VALUES (NULL);
COMMIT;
CREATE OR REPLACE TRIGGER myTrigger
AFTER ON INSERT myTable
FOR EACH LINE
BEGIN
UPDATE myMaxTable
SET maxValue = (SELECT MAX (c1) FROM MaTable);
END;
/
INSERT INTO myTable VALUES (1);
INSERT INTO myTable VALUES (1)
*
ERROR on line 1:
ORA-04091: table HUNBUG. MYTABLE is changing, function of triggering/can not see
ORA-06512: at "HUNBUG. MON_TRIGGER', line 2
ORA-04088: error during execution of trigger ' HUNBUG. MYTRIGGER'Assume that you are doing something like this:
You have three records in the table:INSERT INTO myTable VALUES (1); INSERT INTO myTable VALUES (2); INSERT INTO myTable VALUES (3);
Then do you one insert call to do more than three:
INSERT INTO myTable SELECT c1 + 100 FROM myTable;
This last call insert inserts 3 records in your table - 101, 102 and 103.
When you have a trigger FOR EACH ROW, which will be called three times, but there is no way to predict in what order, and when the trigger will fire for example at c1 = 102, the table is the "mutation" - it is located in the heart of a change and you don't know if 101 or 103 or both is in the table. Oracle does not allow you to do a select on the table of this mutation.
When you remove the FOR EACH ROW clause, the trigger only will be called once at the end of this call to insert, moment in which the table is no longer changing and so your code will be located safely c1 max.
-
DB trigger error - update even table in the script of the trigger
Hi all
I have a table tab1, whenever any update is done on this table on column col1 and col2 also needs to get the update. (These are related to user forms can be updated only col1 form frontend)
So I created a trigger as follows.
----------------
CREATE OR REPLACE TRIGGER tri1
AFTER UPDATE
ON tab1
FOR EACH LINE
WHERE (NEW.col1 = 'YES')
DECLARE
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
Tab1 SET col2 = 1 UPDATE
WHERE transaction_id =: OLD.transaction_id;
COMMIT;
END;
--------
When there is no update on this table, I get following error. Please let me know if I'm missing something.
ORA-00060: Deadlock detected while you wait resource
ORA-06512: at "user1.tab1", line 5
ORA-04088: error during execution of trigger 'user1.tab1 '.
Please let me know if I'm not clear. Thank you
Published by: DharV on August 23, 2011 05:17Your transaction_id is unique?
If this is the case, then you could perhaps use AFTER UPDATE BEFORE UPDATE:
CREATE OR REPLACE TRIGGER tri1 BEFORE UPDATE ON tab1 FOR EACH ROW WHEN (NEW.col1 = 'YES') BEGIN :NEW.col2 := 1; END;
If your transaction_id is not unique - if you really want to update more than one line in tab1 - your update cannot update the same line that the trigger has responded, even with the use of an autonomous transaction. Then you could combine the BEFORE UPDATE trigger above with your own AFTER UPDATE, but then add ROWID! =: OLD. ROWID to where clause, but it would be a bad idea because some of your lines will be updated in a single transaction and others in another transaction.
In general the autonomous transaction is not a great way to solve the problem of changing table within a trigger. I hope that you have a unique transaction_id and can do BEFORE the UPDATE - if it is then a better way is to save the update id in an overall picture in FOR EACH ROW triggers, and only then AFTER an UPDATE fire is NOT "for each line" update the list of saved IDs
-
Deliver the trigger, multi-table insert logging of errors
I find that if I try to perform an insert multi-table with logging of errors on a table that has a trigger, then some violations of constraints result in a raised exception being as connected:
< pre >
SQL > select * from v version $;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL > create table t1 (primary key of all id ;)
Table created.
SQL > create table t2 (id integer, t1_id integer primary key,
2 constraint t2_t1_fk foreign key (t1_id) refers to t1);
Table created.
SQL > exec dbms_errlog.create_error_log ("T2");
PL/SQL procedure successfully completed.
SQL > insert all
2 in t2 (id, t1_id)
3 values (x, y)
4 errors in the journal in err$ _t2 limit unlimited rejection
5. Select 1 x, 2 double y;
0 rows created.
SQL > create or replace trigger t2_trg
2 before insert or update on t2
3 for each line
4 start
5 zero;
6 end;
5 m
Trigger created.
SQL > insert all
2 in t2 (id, t1_id)
3 values (x, y)
4 errors in the journal in err$ _t2 limit unlimited rejection
5. Select 1 x, 2 double y;
Insert all
*
ERROR on line 1:
ORA-02291: integrity constraint (enhanced oil recovery. T2_T1_FK) violated - key parent not found
< code >
This does not seem to be a documented restriction. Anyone know if this is a bug?Hi Tony,.
Looks like you ran into Bug 9539578: INSERT ALL AND TRIGGER CAUSES ERROR LOGGING to FAIL (ROLLBACK)
Concerning
Peter
Maybe you are looking for
-
Cricket support wifi calling?
Cricket does support wifi calling on iPone 5s? Thank you
-
What happens is I type something, in general, I accidentally hit the 'Shift' or something happens that otherwise made me decide to go back and change a letter to a lowercase letter, but after a BACKSPACE on a capitalized letter, I type a new letter,
-
Connection disappeared for scanning etc via PC control
All of a sudden I lost communication with the printer for the "command" scan, a.s.o. Inc.-data for a few years, I could choose the type of scan (pdf, photo, e-mail) from my PC, but something happened and now I couldn't control anything. HPDr-program
-
Sensitive breakpoints to Muse on Masterpage
I'm adding break points to my template (so I can have reactive headers and footer), but the Muse does not leave me - even thought they are on the other pages of the site.Thank you
-
Access to a virtual computer within a NAT configuration on the network
Is it supported or not supported methods to access a virtual machine which is within an instance of fusion on the network?For example, say that my VM is 192.168.168.34I can understand which port is used for NAT translation somehow (i.e.i 4598) and th