Error initializing the hp33250 driver
I have a HP/Agilent 33250 Wavefrom arbitrary generator and use the hp33120 driver. We use this driver for several years without problem. Last week, an engineer in my group began to have trouble running stand-alone routine "hp33120 Initialize.vi". If the initialization is performed as a call of the vi another subroutine, it works fine. But if it does work, we get the error:
'initialize hp33120a with Options.vi.
The error code is translated by 1074135030. The last change to the LabVIEW software has been in February with the release of 2009. I, of course, checked the names and both are correct. Any ideas? Thank you Bob Interesting. He has worked for the update of LV2009? I assume you are using IVI drivers. I've personally never been a big fan of the IVI (having more trouble with them what they're worth) drivers. You could try the current version of IDNET donwloading. I use the 33120 s a bit and check the current driver. It does not directly support the 33250. Tags: NI Software Satellite L650 PXE - E63:error initializing the NIC - error start I have a Satellite L650, which is 2 months old. The motherboard makes a ticking noise (I think it's what makes noise), and when this noise occurs it causes very slow computer! It has been thus since I got it pretty well. Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows. When I restart my computer it runs the windows startup repair 7, found nothing wrong, and restarts the computer. When the computer restarts, the screen stays black for a long time... and then it flashes a blue screen (flash is so quick that I have no idea of what he says) and asks if I want to rerun the repair. I choose not to start windows normally... and the screen goes black for a long time, however there is no ticking noise, but it seems that nothing happens. If I force a reboot, I get an error message saying along the lines of; For Atheros PCIE Ethernet controller... Check the cable connection Help, please! > Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows. Sounds like the HARD drive failure. In my opinion, you need to replace the HARD drive. Backup failed with error 18: the backup drive is not found Hello My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created. So far I have tried: -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac -Remove TimeMachine.plist and restart my mac -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train). I share this time capsule with my wife and she has no problem with that. I can only think of a possible alternation I did which could cause this problem. Because of unstable WiFi problem, I had deleted com Apple.Airport.Preferences.plist com.Apple.Network.identification.plist NetworkInterfaces.plist Preferences.plist or other files and reboot my mac * before * I had this problem with time capsule. However, this is not the first time I do it, and it wasn't a problem before... This could be the reason? If so, how to restore the network settings? Please help me with this problem. Really appreciate! Ted Here is a copy of the Console: 24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup 24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047) 24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found. 24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data 24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data 24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias 24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data 24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data 24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0) 24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again. 24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data 24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data 24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup 24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B) 24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found. 24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup 24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data 24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0) 24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again. 24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data 24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0) 24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again. 24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0) 24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts. 24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21 24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0) 24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup 24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047) 24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found. 24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc 24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc What model is the TC? Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet. (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless). Also give me some screenshots of the TC installing airport utility. Can you get it in the Finder? Get several errors in the hard drive and the slowness of the system XP COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ? Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,. * original title - mistakes, mistakes, mistakes and Everwear *. COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ? Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,. Please be specific on what you mean by "far from many errors on the hard drive." What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim. How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything? If you really get a lot of the drive read errors, the drive is defective and must be replaced. But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free Connection error: 500 Internal Server Error (html: error initializing the servlet) Hi Roderick,
Solution 1 is just a workaround (because it would turn off distributed cache JVM), the best would be using solution 2 and use a different port. Kind regards Hello I have run Long DST test and test HDD failed. Failure of ID M4M5BW-6B879U-QFPK0K-61EC03 Product ID C5D27ES The laptop is slow and HARD drive is slow. Can you tell me what is the problem? Whenever the drive test hard short DST fails with 24 error Code numbers indicating that the hard drive has failed and that needs to be replaced to solve the problem HP will offer a replacement HDD if the laptop warranty is Active, otherwise you can buy a SATA hard drive in a nearby retail store Please make sure that you get at least equal as long as the original one in order to use recovery disks. If you need you can buy a bigger, but not smaller hard drive capacity. For example, if you have a 500 GB hard drive you can improve it to 750 GB hard drive, but not 320 GB hard drive Please try the troubleshooting below indicated once the steps: Step 01. Remove the battery and unplug the power adapter AC. Step 02. Press and hold the power button for more than 30 seconds Step 03. Plug the AC power adapter / (leave the battery for now) Step 04. Press the power button and check if the unit is operating normally If the steps listed above is not enough, then you can try reinstalling the hard disk on your laptop If the problem persists again please Contact HP if your HP laptop is under warranty, HP could replace the hard drive and provide recovery media to restore the operating system to factory after the replacement (if you have not yet created recovery disks/USB support) Note: Back up all personal data on an external drive if possible. Otherwise, you can connect the HDD defective via SATA USB adapter with another PC or a PC even after replacing the HARD drive & put in place of the operating system and try to copy / retrieve files. Please click on the link in order to identify, prevent, diagnose & recover against any failure to drive on HP Portable Hard Drives & Solid State Drives: http://h10032.www1.HP.com/CTG/manual/c02876562.PDF You can check your warranty here to check the status and click here to order a new hard drive Hope this helps, for other queries in response to the post and feel free to join us again * Click on the star of CONGRATULATIONS on the left to say thank you *. Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem. Thank you K N R K Although I am an employee of HP, I speak for myself and not for HP I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :). Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. " and then nothing happened. What should I do? How can I save my files? I planned it, rebooted, and nothing happened. I have tried three times now Hey read the information on how to run the check disk at the link below vista64.com If the first method does not work, try the other methods http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html have a Happy New Year Walter, the time zone traveller Error initializing the application. It seems that corrupt ntdll.dll error I installed Autocad 2010 64 bit on my new Dell Vista Home premium 64-bit OS. Worked like a charm. I installed a piece of trial software that I ended up uninstalling a day later (also of Autodesk). I can no longer launch Autocad... error initializing and it points to the ntdll.dll error. I have uninstalled and installed the software several times with information about the Autodesk site and the result is the same. The application installs perfectly, but will not start due to the error of initialization of the. I ran system restore, but now only available restore point is "newer" than when the problem occurred. I contacted Autodesk and they feel that I'm able to use a distribution Linux on CD to allow me to replace the damaged file ntdll.dll. Otherwise, they unfortunately believe that I might have to reinstall everything. Is there a relatively easy way to replace a ntdll.dll file without going through a Linux distribution? Initializing the hard drive ERROR... (a device i/o error) Separated from this thread. I have the same problem with a SSD 8 GB chip on the motherboard, designed to function as a "Cache Express". Disk Mgmt reports 'unknown, uninitialized, unallocated '. Still to be resolved, I get the error of e/s as stated above. It worked FINE until I used Device Manager to "disable." Since then, I had to do a total reinstall of win 10, it would "reactivate" hoping. There can be no. How can I get rid of the IO error? Thank you! Hello Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. To better understand the issue, I would ask you: Given that the problem you are having is with the SSD chip on your motherboard, I suggest you to update the chipset drivers and test if it works very well. Read the following article and update all the drivers available. How to: install and update drivers in Windows 10 If you are unable to find the drivers for Windows 10, you can try to install the drivers in compatibility mode with Windows 8.1. First download the driver from your computer manufacturer's website and install it then. SE refer (make older programs compatible with this version of Windows) http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows Note: This link also applies to Windows 10 Let us know the results. Do not respond with the required information, we will be happy to help you. Error connectign the ODBC driver on Server 2008 R2 Hi all Hello Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question: Error on the network drive mapping Hello From an XP machine, to another XP machine which is used as a server temporary database (with just the back end of a split MS Access database) I get the following error trying to map a network drive: Error loading Setup50045.fOn A dll initialization routine failed. There are about 9 other users that connect successfully to this shared drive, and this particular user, logged in as long as another user in the same machine, map this drive without any errors. Please if anyone can help. Thank you in advance! Hi PsyberFox, Method 1 I suggest that you perform the restoration of the system to the point while it was working fine. How to restore Windows XP to a previous state http://support.Microsoft.com/kb/306084 Method 2 If the previous step fails, see if the problem persists on a new user account. How to create and configure user accounts in Windows XP http://support.Microsoft.com/kb/279783 Method 3 If the previous step fails, then you need to repair the Windows XP installation and check if it helps. How to fix a computer that does not start http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start Hello I'm unable to send the file with my laptop running windows 7 Ultimate x 64 on my phone (sony xperia with android os p) I can send the file to my phone to laptop and my laptop to another device and any other device for laptop .when I have associated my phone to laptop, I get notification this device driver is not available. my windows is updated and I installed the version lastes my bluetooth of the BT and my laptop even factory plant i tride to update my BT driver automatically from the internet but it doesn't work and I still have this problem please help me how can I solve this problem thank Hello This error can occur if you do not have an installed device driver or if you have an obsolete device for your Bluetooth device driver We can refer to the article and check if it helps. Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device Try to re - connect the phone and try to install PC companion Sony support and check if it helps. Hope the helps of information. Error initializing the source system Hi Experts, During the initialization of the source system was wrong out when I use Oracle E-business suit as a source. the user we use in oracle has the same access, such as mentioned in the Administrator's guide. Initialization of the source was failed with the error below: ODI-1227: basic system EBS updated Source (procedure) task language fails on the source of ORACLE EBS_DATA_SERVER connection. at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462) Thank you Ravi. The approach you take here is not only give your users access to the FND_LANGUAGES table, but also create a SYNONYM for this table in the schema of the user that has been configured to connect to the EBS GL diagram in ODI. It is the way in which this is done also in the schema for the user to APPS. You can check yourself by running this as the user APPS to show that FND_LANGUAGES: SELECT * FROM USER_SYNONYMS WHERE SYNONYM_NAME = 'FND_LANGUAGES '; Once you create a SYNONYM in the schema of the table are accessible without prefixing scheme name in front of the user's table or you should then be able to run SELECT * FROM FND_LANGUAGES; which is the format that uses up until this FDMEE is done, you must use SELECT * FROM APPLSYS. FND_LANGUAGES; even if you've got access to this table. HTH RNG.exe - error initializing the net.framework The dialog box indicates to run the application, I'll need to install one of these version v1.1.4322 or v1.0.3705. I use internet explorer 8 and I would like to know which version to install to correct the error. Thank you Hello · Exactly when you receive this error message? · How long have you been faced with this problem? · You did it all changes before the show? · Using a Dell computer? If you are using a Dell PC, you can check the link otherwise below ignore. I suggest that you to repair the current version of the .NET framework, do return the follow-up articles Microsoft Knowledge Base: http://support.Microsoft.com/kb/306160 http://support.Microsoft.com/kb/908077 http://support.Microsoft.com/kb/824643 For greater stability on Windows XP, I suggest you install Service Pack 2 or Service Pack 3 before installing .NET Framework 4.0 Hope this information is useful. Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive. original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond. Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add. Please can someone help? Thank you very much... LiZ :) Never use Registry Repair programs. They can cause more harm than good. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.bleepingcomputer.com/tutorials/tutorial140.html Understand the Extras in Windows Vista and Windows Update info is at the link above. Remove the Vista updates; two ways to do this: 1. a System Restore to before the updates: Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next If you use Norton, disable it before using the system restore. If it is impossible to enter the Normal Mode, do a Safe Mode system restore: Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER. System restore steps according to the info above. Also: 2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window > then click the one that you don't want > uninstall will appear at the top > uninstall it. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ". When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems. > or if you do not need an individual > right-click on > UAC prompt > hide it See you soon. Mick Murphy - Microsoft partner HelloWe have some people affected by this kind of bios error:https://bugs.Launchpad.NET/Ubuntu/+bug/507723Now I ask you what I can suggest to these people?Thank you Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling Hello I own a Toshiba Satellite L40-139 under Windows Vista 32-bit. However, I think that this problem only applies to this model as other users are experiencing the same thing. I often watch videos online mode full screen (like on YouTube), but when After I cleaned the comp, the temp whent down, but I think that's not recomeded level. I use "fan speed". hd0 37 c Temp1 55 c Core 0 52c Windows 7 ultimate 32 bit only firefox running. any suggestions? This machine is running 8.1 WIN. Bluetooth is intermittent. Device Manager says: "Windows has stopped this device because it has reported problems (Code43). Is this a warranty issue? I downloaded a file that cannot be burned with Windows media player 11. The file downloaded from a recorder of figures and have no leads that it is 2 hours long and medial window will not let me burn to a cd. How can I fix?
Driver status: (Hex 0xBFFA000A) check that the name of the library (hp33120a_32.dll) and (hp33120a) prefix are correct. »Similar Questions
PXE - E63:error initializing the NIC
PXE - MOF: exit intel PXE ROM
No device bootable-insert boot disk and press eny key
That would explain the PXE Boot error as well.
This error occurs if the laptop tries to boot from LAN because other sources bootable couldn t be found.
If the warranty is valid, get in touch with a local ASP from Toshiba and ask the new HARD drive
500 internal Server Error - Servlet error: an exception occurred. ' everything occurs while trying to open the login page.
I checked the details flowing:
1. adstrtal.sh going just with output state 0.
2. State of adopmnctl.sh are very good.
3. application.log
+/EBS/applmgr/dev/inst/apps/DEV_r-D620/logs/ora/10.1.3/J2EE/oacore/oacore_default_group_1/application.log+
13/02/26 13:59:05.81 html: error initializing the servlet
java.lang.NoClassDefFoundError: has not been initialized class oracle.apps.fnd.profiles.Profiles
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:126)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)
to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:29)
to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:879)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
13/02/26 13:59:05.82 html: Servlet error
java.lang.NoClassDefFoundError: has not been initialized class oracle.apps.fnd.profiles.Profiles
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:126)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)
to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:29)
to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:879)
to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
Is it possible to fix this?
Ronald Ruffscicle
Now, I installed another package of drafting and the result is the same... and the error is the same, even if it is not the same software.
I ran SFC/scannow and the journal reports there is little files that can not be repaired.
I run the DVD of Vista and tried a repair, although I can't find a ntdll.ll replacement and I don't seem to be able to change it if I could.
Is a complete operating system, the only solution? If so, it will repair this problem or will I still have this problem if I reinstall the OS? Help, please!
I was expecting... (I know) that this could be avoided.
http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919
Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
at oracle.odi.query.JDBCTemplate.executeQuery(JDBCTemplate.java:189)
at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:94)
at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1930)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1073)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 1.run(DefaultAgentTaskExecutor.java:49)
at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor.executeAgentTask(DefaultAgentTaskExecutor.java:41)
at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doExecuteAgentTask(TaskExecutorAgentRequestProcessor.java:92)
at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.process(TaskExecutorAgentRequestProcessor.java:83)
at oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:79)
at oracle.odi.runtime.agent.invocation.support.InternalLocalRuntimeAgentInvoker.invoke(InternalLocalRuntimeAgentInvoker.java:49)
at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:173)
at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:140)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:271)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:162)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3437)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1509)
at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)
at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1930)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1073)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)Maybe you are looking for