Error installing standalone IOS (aIOS) on a point of light access to the CLI
Hi, guys
My new 3700TH AP is running a pre-CAPWAP image.
Received in error when you try to load the standalone tftp IOS:
It is said: "This download is prohibited when the access point is configured at the domain - B."
No one knows what things cause and how to fix it? Thank you
You that much need to use "ap3g2-k9w7 - tar.153 - 3.JC2.tar" which takes in charge the regulatory field b
HTH
Rasika
Pls note all useful responses *.
Tags: Cisco Wireless
Similar Questions
-
I'm on a MacBook Pro and after I dl the Suite CS5 Design Standard is what I get: " 'Install' is corrupted and cannot be opened. You must eject the disk image. ". I rebooted my laptop several times and retried several download but it's the same message. What can I do if I can install this new product?
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but here are some links that CAN help with old programs
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
Just replaced my hard drive in my 6 year macbook pro. Try to install Photoshop CS5. Operating system is up-to-date with the latest and best. I allowed out photoshop on the old hard drive before installing the new.
Now, I downloaded the installation from the adobe Web site package and tried to start the installation. When I do, I get the following error message:
'Install' is corrupted and cannot be opened. You must eject the disk image.
'Install' is on the image disk 'photoshop_12_LS1.dmg '. Safari has downloaded this disk image today at 16:33 from trials2.adobe.com.
Options are 'Cancel' or 'eject the disk image.
What have I done wrong?
It is a common mistake when dealing with Gatekeeper of OSX which, by default, won't take any unsigned as older CS5 of Adobe software applications.
First go to Apple > System Preferences > security & privacy. Under the general tab and on the bottom, the value "allow applications downloaded on the" "Anywhere".
When you have finished and launched Photoshop, set the default value: "Store App and developers trust".
-
Convert a point of light access point independent
Hi all,
I have a brand new AIR-LAP1242G-A-K9 who is a lightweight AP native and I need to convert it to a standalone access point, is it possible?
Thanks in advance for your help.
Hi Alfonso,.
Yes, it is possible. Here is the official document:
We already used this procedure quite often and it works very well.
Welcome,
Sebastian
-
LaserJet P1102: HP LaserJet P1102 - error "INSTALL BLACK CARTRIDGE"
Tried to print a provision of the EAGLE Cadsoft program card on photographic paper, A6. The paper A6 was on top of the A4 papers, if the printer did not take the A6 paper. After that, the error "Install black cartridge" appeared. Tried to power off AND removed the power cord for 1 minute, checked for paper inside, cleaned the pins on the cartridge of the printer... still the same error. Help will be greatly appreciated.
Thanks for providing this information @north991.
I would like to do a hard reset to see if that will solve the problem.
Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
This ensures that the printer is full on and can help this situation.Please try the steps listed in this document for the Solution for light flashing light and pay Attention, Pro printers HP LaserJet - flashing lights.
If the problem persists, please Contact the HP Support and let them know that you have a warranty on toner and inquire about a replacement. Check the model number and the form to receive a file number for faster assistance.
Please hold me. Thank you.
-
Summary of the issue
Other issues of Windows Live family safetyWhat version of Windows Live Family Safety do you use?Version 2011 (15.4.3538.513)Choose your operating system version:Windows 7Additional details
While you select "Accounts of Windows I want to monitor on this computer" it shows the loading for a long time then popus symbol with:Windows Live Family Saftey modal window popup:
"There is no end point for more available from the endpoint mapper."
800706 9 error code
Any ideas?
I had the same problem and the error you mentioned above... Has been frustrating me. After much research I found out she was related to the basic and Windows Firewall filtering engine.
Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.
I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904
Hope this works for you as well...
-
When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?
I would say "try and do a restore as new iPhone" like everyone else but I'm having a similar problem and nothing works! I've restored all the possible ways and nothing. I got my screen replaced and I still have the same home button but my phone updated with error 53 (makes the phone unusable) but the camera did work before the update. and Apple has released iOS 9.1.2 (13D 20) to correct the error 53 (mainly for other reasons) but when I go to use the camera, it is only black! If someone could help 'discovered' and I would be great!
-
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
Sorry for the ridiculously long title, but that is exactly the error I get. When I contacted my friends @ Skype that they just told me it's associated windows problem. I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...
Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.
Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question. It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.
Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted. Again, try if you wish. When you uninstall Skype, you will not lose your contacts.
Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung. You have this installed on your system? If so (or even if not), go to C:\Windows\system32 and rename avrt.dll. You can call it avrt.dlX or something else you like. Reset. Let us know if that fixes the problem. If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).
-
has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
Error: System Restore cannot create a restore point.
When you start System Restore, I get the error message from Web page "line: 166; "Error: unspecified error." When I continue to try to create a new Restore Point, I get the message "System Restore cannot create a files. Restart the computer, and restart System Restore. "Restart the computer does nothing for me, it simply again creates the same mistakes.
Hello
1. don't you get an error code along with this error message?
2. have you done any change in software on the computer lately?
3. have you installed a third-party backup software?
4. do you have Norton or McAfee installed?Method 1.Try the steps listed in the article below and check.You cannot create a restore with a HighPoint driver installed
http://support.Microsoft.com/?kbid=322246&SD=RMVPMethod 2.
Temporarily disable the security software installed on the computer and check if the problem persists.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3.
Please check if you are facing the same question when working in safe mode.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to start in safe mode of Windows XP.
e. when Windows starts, try using System Restore and verify.
Hopt this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Error installing - what should I do?
I am running Windows 8.1 and trying to open the CS6: Design Standard
They ran beautifully before the system crash. After Windows has been reinstalled I can't open them more.
I watched uninstall them, but Windows does not recognize that they were there.
I tried to reinstall and got the error message copied below.
When I try to open the programs now the message is, 'Point of entry not found '.
My cat of support sent me here.
--------------------- -
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 2753.The File 'formdesigner.exe.70DBED24_B579_40CB_AB0B_F1221A3E9EC5' is not marked for installation.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2753.The File 'formdesigner.exe.70DBED24_B579_40CB_AB0B_F1221A3E9EC5' is not marked for installation.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
-------------------------------------------------------------------------------------6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code
Run all programs as Administrator http://forums.adobe.com/thread/969395 to assign FULL... Permissions said yet, but it is sometimes necessary for Adobe
-
How to recharge my hard drive with photos that are stored in iCloud? After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".
Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.
-
When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.
Hey Shiva,
I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general
Please do not hesitate to contact us if you have other questions related to Windows.
-
I used 160 microsoft points to buy a video clip, he said not that nothing was wrong with the video. so I bought it, it says see downloads, so I did downloaded but as I tried to play, she would not play. So I deleted it tried to download and play again it gave me the error code 80070057. can I get my points
Hello
You can check this link:
When you use your Xbox 360 console to download and view videos or movies, you receive an error code
Maybe you are looking for
-
upgrade of RAM (or swap?)
Three MacBook to upgrade several Rams (or swap) - all of our children, who have dumped their old MacBook for us and we poor parents just want to make use of the best of them as servers at home. Just need to run it by you to ensure that what I learned
-
DeskJet 3051 a direct print from device compatible pictbridge.
The specifications for the printer online all-in-one deskjet 3051 has said that direct printing is supported for pictbridge compatible devices, which is the reason why I bought it. I tried to print directly from my Canon camera, which is also pictbr
-
Cannot get on computer as ADM.
I'm Admiral on my HP with Vista as OS computer. All users have access to their user account. I can't open my own. Help, please?
-
HP Officejet 6100 cut the top of the page when printing
I use a printer HP Officejet 6100 with Windows 8. Sometimes the printer has trouble grasping the page to print. Printing starts at the top of the page - cut on top of what is being printed. Does not happen all the time, but often I have to reprint f