Error JVM of Smartphones blackBerry 513-Please help!

Help, please!  My BB screen is white with only the JVM error 513 and reset.  I press reset and it goes off and returns to the screen.  I tried to make a backup or restore on my Office Manager, but it does not recognize my device.  Does anyone know how to fix this?  So I'm back from BB

Hi vvjohn15, the JVM 513 error is common after the wrong password ten times, type this is your case?

Follow this link

http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB13003&sliceId=2&docTy...

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones BLACKBERRY MESSENGER Please HELP!

    Hello world

    I recently bought the new Bold 9900 on Bell Mobility and I found a few flaws on the phone itself. I went back to the store, they said, it will be replaced, but they ran out of stock.

    So, my problem is, is that I have a lot of people on BBM. These contacts are very important and I can't lose. I support my contact list on my memory card before I move to my new camera, all are saved? If so, once I have restore backup of BBM on the new device, all my contacts will receive a notice to add? I really hope someone can help me. Ive been listening to people for their pins and I do not wish to disturb once again the week next to their secret codes.

    In addition, question #2, is BBM in the world? Then will I pay if I left my current country to visit another and continue to use BBM?

    If anyone can help, please reply to this post, pin me to pin: 2829333E or email me at [email protected].

    Thank you very much in advance!

    So answering your first question.

    If you save either your phone through desktop software or go to BBM and click on backup and save it to your media card and then you get your new device, it will be restored on the new device.

    Here's the article on backup and restore contacts

    http://www.BlackBerry.com/BTSC/kb20554

    Second question. Yes BBM is all over the world, but it uses the data from the carriers, so if you are traveling to other contrys being aware that you use roaming data which costs very expensive, unless you change your plan when you travel.

  • BB Bold 9700 Smartphones BlackBerry alarm Please HELP :(

    I set the alarm and switched off the phone.

    The phone turns on the alarm time but I have emails coming through and they always stop the alarm ringing.  I see that the alarm lights up as he said to reject or Snooze, but there is never any sound.

    If I have any e-mails that traverse the alarm sounds as I tested it during the day.

    Please can you help me get the alarm goes off even when I have emails coming through the phone?

    The audible alarm should substitute the emails.

    This is my first BB and not had it long before I left on vacation... I almost missed flights due to the alarm does not sound not... it NEVER happened to me with Nokia...

    PS I'm not a BB teccy so answers in step by step please

    Thank you

    Hey,.

    Yes, you need to hit Menu > bedside enter Mode each time that you configure the alarm and sleep. Just one condition to get a good nites sleep

    with regard to the parameters:

    Disable the LED = disables the annoying flashing when you get a notifcation = YES

    Disable the Radio = rounds out of your connection to the world your choice = I put it or not

    = Reduced the brightness of your display screen dims = YES

    His profile = all alerts Off no = no sounds

    Hope that helps!

  • Titanium curve Smartphones blackBerry 8320 (Please Help)

    Hi all

    I noticed that the plastic that is on the LCD on my BB is torn off. My phone is less than a month and with this plastic detach, looks really tacky and I'm afraid that the current screen will start to collect dust... anyone who will answer my question is, o I need to replace the front plate just because of this plastic, or is there something I can buy and fix it myself? Thank you very much.

    -Bye

    Hi and welcome to the forums.

    I use a case of BSE (skins Best Ever) on my 8330 to protect the screen (not the whole of the device).  He served for 3 months with no peeling, either. Highly recommended.

    Here is the link.  The best skins ever

  • I have the error code: 80072f8f on my lap, please help

    I have the error code: 80072f8f on my lap, please help

    Please see this thread

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072f8f/945f3ec1-8bac-4c10-A54E-1e564d18c37e >

    UTC/GMT is 08:08 Tuesday, November 1, 2011

  • error in the process bpel deployiong please help

    I get an error while the process bpel deployiong please help


    BUILD FAILED
    E:\jdevstudio10132\jdev\mywork\Application4\vinayread\build.XML:79: There was a problem connecting to the server "chdsez116553d" using the "8888" port: bpel_vinayread_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
    Error loading process.
    The field of process encountered the following errors when loading the "vinayread" (version '1.0') process: BPEL validation failed.
    Source BPEL validation failed, the errors are:
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "bpel.xml" XML parsing failed because "undefined element.
    In WSDL to "file:/D:/product/10.1.3.1/OracleAS_8/bpel/domains/default/tmp/.bpel_vinayread_1.0_679323b0585449e9fd1887e6ee2bf444.tmp/vinayred.wsdl", part of message {http://TargetNamespace.com/vinayred} 'root element' element is not defined in one of the schemas.
    Please make sure the spelling of the element QName is correct and the WSDL import is complete.
    ".
    [Potential fix]: n/a.
    .
    .
    If you installed a hotfix on the server, verify that the ownership of the bpelcClasspath domain includes patch classes.
    at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:862)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:728)
    at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
    at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase (unknown Source)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
    at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
    at deployHttpClientProcess. jspService(_deployHttpClientProcess.java:376)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    to oracle.security.jazn.oc4j.JAZNFilter$ 1.run(JAZNFilter.java:396)
    at java.security.AccessController.doPrivileged (Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:34)
    to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:880)
    to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)


    Total time: 1 second



    Please give SME solutions

    Check all the XSD / WSDL / BPEL files in your project, if something is mentioned on "TargetNamespace.com".

    Marc

  • Smartphones blackBerry browser issues help please

    Hey people: I get an error "http 504 gateway timeout" on some pages. For example, I do a search on the web and you find on wikipedia. If the wikipedia page has more pages, I click Next and get the error message. This happens on other sites with many pages. Please help me! Steph

    Steph, to do this: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

    Now, try these sites for browser again.

  • New Smartphones blackBerry tour need help!

    I bought bellshare buzz berry and when I try to record sound telling me that my code is invalid I do also I've been trying to customize the sounds on my Tower rather than create a whole new profile is possible on the tour, I have been able to customize and edit them on the Pearl but noticed on the tour that you can't or perhaps its my phone please someone help

    First of all, I would contact BellShare for support of their application.

    For the issue of profiles, it is a bit different for the latest operating systems.

    KB16476 How to change a sound existing profile on the smartphone BlackBerry Storm and BlackBerry Tour 9630 smartphone
    KB16477 Create a sound profile for a specific contact on the smartphone BlackBerry Storm or BlackBerry Tour 9630 smartphone

  • Rec'd error message about updates - Code 80070641 - please help

    Apparently l have tried to d/l the same updates since 5-6 days and never knew it l... continue to get this error... could you please help me...

    Hello

    You can cancel the fix now and check if Windows Update works correctly.

  • BlackBerry Z30 please help me in a big mess

    My z10 told me restart the phone because my videos where not not opening after the reboot happened to show ing just the name from blackberry to the red light, then he turned completely off, help pleease cos it is a phone friend birthday is today, and I've totally ruined, please help

    This article might help you.

    It is not, you can claim a warranty or take it to a phone repair specialist.

    Good luck.

  • Smartphones blackBerry desperately need help: Desktop Manager, Media Sync

    Hi guys,.

    I am desperate for help. I have read through the Help menu and was functional on all night without success.

    Last night I installed the Desktop Manager from the CD that came with my 8310 and I also downloaded and installed the Media Sync application on the Blackberry website. Subsequently, I decided to download OS 4.5 since my curve runs only 4.2.

    I connected my Blackberry via USB and noticed that as soon as I do this, I can click is no longer on the Desktop Manager. I looked in the Office Manager in my system tray and confirmed that it "was still working", as well as in my task manager which revealed that he was still in the market.

    Possibly by a moat, I managed to get the Application Manager to work and tried to install OS 4.5. I heard that it takes a while, so I left it all night with my computer expecting to come back in the morning. When I go back to him, it was still in the phase of 'back-up device', but no progress in the progress bar. Looking at my curve revealed my usual home screen. As my button cancel in the request was not clickable, I had to unplug and put an end to the program using the Task Manager.

    I restarted the computer and I tried to start the Desktop Manager and plug in the unit. The Director of office prompted me for my password, I entered, and he said that it was a link on the blackberry and the Desktop Manager. I tried to click on the different options (Application Manager, Media Manager, etc.) but found that they were not clickable. Nothing happens when I click on them. I tried to look at the connection in the Options, but found that I can't click on that.

    I decided to try the next Media Sync. I opened Media Sync and put my password. After that I put my password, it says that it cannot connect to the device, please try again. I click Retry, nothing.

    I will go back to the Desktop Manager, unplug the blackberry, click Application Manager (as it is the only way I can make it work) and plug the blackberry again after that the Application Manager has started to work. I try to start the installation of the OS 4.5.

    He starts it connects to device stage, then stops and says that he "cannot connect to the device. You will need to enter a password on the device. ». No password box appears, and the screen of my blackberry only said that it is connected to the computer.

    I've included some shots of what's going on.

    Media sync

    Application Manager

    Director of office

    BlackBerry

    Please note that the Blackberry is the display that it is connected to the computer, but the Desktop Manager now says it is not.

    Questions

    For the screencapture above, please note how the Desktop Manager now says that the device is connected, but the same result can be shown with the Media Sync.

    The problem is now resolved, but I do not know why.

    Two days ago, I installed and then decided to uninstall Facebook. I downloaded the latest version of the Desktop Manager, once again, and when I plugged in my phone, it worked. I have tried since then with the same results.

    I'm really happy about it! But I still don't know what happened, or if the installation of Facebook had nothing to do with it.

  • Error Code 43 with Nvidea GTX650, please help

    Hello, I currently just bought a Nvidea GTX650 graphics card, I installed all the drivers according to the instructions to however I am unable to access all the games. I explored this further and entered my Manager device and found that my Nvidea GTX650 has an error code 43 for him. I tried the uninstall/install/upgrade to update all the drivers but no luck, please help :)), here are my system specs.

    map of mother Foxconn h61mxl-k

    Nvidea EVGA Gtx650 2 GB GPU

    4 gb ddr3 RAM

    650ub ATX powersupply

    Processor Intel Pentium G620 2.60 GHz

    Windows 7 operating system

    any help would be appreciated thanks.

    Hello

    As you have tried all possible steps and still the problem persists, I would say to contact Nvidia support team check what they have to say on this issue.

    You can also view Code 43: Windows has stopped this device because it has reported problems

    It will be useful.

  • BlackBerry® Smartphones Blackberry 8330 EMAIL * HELP *.

    Hello I have a BB 8330 sprint, when I ever I have send an email or even a photo by e-mail a copy of this message is sent back to my in my Inbox from my e-mail and message in the box and he drives me crazy... Is there a way to stop this? Someone please help thanks. I use my G-mail service (Google). It sends a copy for me and the other person.

    Of course, no problem. Simply place a check mark in the green box of the solution that contained your answer

  • BlackBerry smartphones could you please help me

    Help me please

    All of a sudden my bb is stopped

    and now, this thing is keep illustrated

    What shoul I do?

    http://im15.gulfup.com/n47i1.PNG

    awaiting your response

    Thank you

    You need to reinstall your OS device to restore access to your device.

    http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?noCount=true&externalID=KB10068&sliceId=2&cm...

    Check the steps below for OS - upgrade

    Step #1

    Before you begin, make sure that BlackBerry Desktop Software is installed on the computer.

    Step #2

    Make sure that you have installed the software for device updated on your computer. Visit this link to get the software for device update the carrier OS download site.

    Step #3

    Users can perform a full or selective data backup by using the tool of backup and restore in BlackBerry Desktop Manager using the following steps:

    1. Connect the BlackBerry device to the computer that is running BlackBerry Desktop Manager.
    2. Open BlackBerry Desktop Manager.
    3. Double-click on the backup and restore.
    4. Select backup to perform a full backup or select Advanced to make a backup of specific databases.
    5. Choose a location to save the backup file, and then click Save.

    Step #4

    To perform a clean installation of the BlackBerry Device Software, do the following:

    1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
    2. Double-click The Application Loader icon.
    3. Click Next to start the installation process.
    4. Type your BlackBerry smartphone password, if prompted, and then click OK.
    5. Click on the checkboxes corresponding to the names of the applications you want to load, and then click Next.
    6. Click Advancedand then click the check box next to delete all already installed applications.
    7. Click on Next.
    8. Click the check box next to do not automatically back up the application during the process of loading data.
    9. Clear the check box next to the backup and restore applications installed wireless.
    10. Click Next > Finish.
    11. Once the process is complete, the load succeeded message. Click close to return to BlackBerry Desktop Manager.
  • BlackBerry Smartphones Will someone please help me!

    Please someone out there will help me!  I just bought a blackberry pearl and can't seem to pair with another device using Bluetooth, I can connect, but when he tries to connect all the contained machine telling me unable to connect, I have looked for help on the phone. And she glance to say to the documentation that came with the phone, but no documents came with it. All I want to do is use the Bluetooth and my husband phone photo transfer, they are so special to me, to my son who isn't with us anymore

    Thanks for the clarification...

    amber130 wrote:

    I found the you must go to the menu and click on receive messages using Bluetooth

    Exactly as I asked you in my first reply to you in this thread. Sorry... I guess I assumed that you had actually read this post. My mistake.

    amber130 wrote:

    I have to say one thing to you, I bought the phone from vodafone info didn't know it was a phone talk, I'm on the contract, it would make a difference.

    For this feature of BT file transfer, the contract with your operator not is irrelevant... you could have the BB with no wireless at all and still would have to do these same steps for transferring files via BT

    amber130 wrote:

    Y at - it an easier way to use Bluetooth or could you have another suggestion.

    As stated in my first reply to you in this thread, this is WAD - works as expected. There's no other way.

    Good luck!

Maybe you are looking for

  • ITunes Bill without reason

    Please someone help me with this itunes took my money without reason < image edited by host to remove personal information >

  • -Power connector - Satellite Pro M70 of spare parts original purchase

    Hi all The power on my laptop Toshiba Satellite Pro M70 connector broke and my laptop is out of warranty... I want to buy a replacement part, where can I get an original piece of toshiba replacement? Here is a picture of the part:http://I264.Photobuc

  • CPU utilization 100% - according to HP Insight

    HP Pavilion a4316 - Win 7 Home Ed.  6 GB Mem - 1 t hard dr.  The last 4 days I received an alert from Norton Insight: "Info, high CPU usage: graphic windows audio device detected, no action required isolation."  Process ID5240 CPU 100% of the CPU at

  • 80072efd error code arrives, how can I solve this problem?

    Updates have'nt was coming through. Error 80072efd me this alert code. What should I do to correct.

  • I have a problem to backup a Quickbooks file.

    When I try to save a file on a CD - R or CD - RW of Quickbooks I get the following message: "E:\Friends of Fremont.QBB Fort is not a valid Win32 application".  What does that mean?  And how do I get the backup file on a CD?   Thank you.