Error message when you try to synchronize iTunes with iPhone
Lately every time I connected my iPhone to my computer to synchronize with iTunes I get an error message that "iPhone unusable because it requires a newer version of iTunes. Go to www.itunes.com/uk to download the latest version of iTunes. " I did that, didn't work. I uninstall and reinstall iTunes, did not work. I checked the updates on my iTunes, it is updated. I don't know what to do. If anyone has any suggestions I would be very appreciate! Thank you!
What version of Windows are you using? If you have Windows XP, I'm afraid you're stuck.
An iPhone IS requires at least iTunes 12.3.3 which in turn requires at least Windows 7.
12.1.3 iTunes (from your tag) is the latest version running on Windows XP (which is what I suspect you have).
Tags: iTunes
Similar Questions
-
I keep getting error messages when you try to synchronize the files from the pc to a device
He starts the synchronization process and finished very quickly not to synchronize files and said 'error' next to each file in the synchronization status, but no other explanation
Hello
Thank you for writing to Microsoft Communities.
Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.
1 are. what device you referring?
2. What is the brand and model of the unit?
3. What is the exact error message do you get?
4. have there been recent changes to the computer before the show?
5. do the issue confined to a particular file?
6. what application you use to synchronize the device?
Please go ahead and consult the methods mentioned below and later a update on the State of the question.
Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Set-up-a-device-to-sync-in-Windows-Media-Player
Synchronize music, photos, contacts, and calendars with a mobile device: http://windows.microsoft.com/en-US/windows7/Sync-music-pictures-contacts-and-calendars-with-a-mobile-device
Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-sync-frequently-asked-questions
Please follow these recommended steps and post if you still experience the problem.
-
When I open itunes with my iphone plugged in, does not display the page where I can choose to synchronize the music - it shows, it's the ability to synchronize the voice memos, no music - please help!
https://discussions.apple.com/thread/7163823 - if you subscribed to Apple music or iTunes game, you will not have to run manually or synchronize music on a device in iTunes. Synchronize your music is made by iCloud and all of your eligible music should appear there. Movies can always be synchronized.
A little more on this subject and a few options - https://discussions.apple.com/thread/7194995 and: move content from iTunes on your computer to your iPhone, iPad or iPod touch
- https://support.apple.com/en-us/HT201593
and a workaround - https://discussions.apple.com/message/28842873#28842873
If you haven't signed up for one of the iCloud based services:
https://discussions.apple.com/message/28481661#28481661 - "synchronize your music changed in iTunes 12.2.0 and iOS 8.4 music App."
-
Error message when you try to save scans with c309g
I have a G5 Imac running 10.4.11. I recently acquired a printer/HP photosmart premium (C309g) and although it prints I cant get scans to save. The mesaage I get is "an error occurred registering the file because it could not be written in. Check the properties of the file to ensure that it is not dead. "I get this with UB or wireless connection and have reinstalled the HP software. Any ideas or suggestions to fix this would be appreciated. Thank you
It seems that the problem is poorly written code for Mozy (the program backup - multiple threads this topic on the forums of Apple support)-I installed an upgrade to Mozy, reinstalled the HP software from the link provided, repaired permissions and restarted. So far so good. Thank you.
-
All PS and BR apps have the same error message when you try to update
with error code: U44M11210
and
Message text: failed to extract the file. ??
Has anyone experienced this and found a solution?
U44M1I210 - creative cloud help / error U44M1I210 | Install updates: http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
-
I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2
It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility. Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it. My VPN works much better without AirPort Express connected.
Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.
If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.
As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.
But it's your call.
-
Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?
It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.
Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.
-
Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct. Contact your network administrator to make sure the proxy server is working.
Go to Options > advanced > network > connection > settings, then choose 'no proxy '.
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.
-
After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)
It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.
The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.
-
Original title: C:\windows\system32\icacls.exe
For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection. Whenever I do; try to download something or download something, I get the following error:WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.
C:\windows\system32\icacls\exeI have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.
Any suggestions? I really need to download Trend Micro.
Thank you
AmySee the article below:
ID of the KB Article: 2588679.Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."Check the following settings:
Right-click on the downloaded file. Select Properties.
Click the Unlock button.Check the suggestions the following threads:
http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826Let us know if that helps.
-
I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
One of the installation files seems to be corrupted. HR:0 x 80070003Hello Amawob,
Thank you for using the Microsoft answers Forums.
Solution:
You cannot install some programs or updates.
http://support.Microsoft.com/kb/822798
Reset the Windows Update components.
http://support.Microsoft.com/kb/971058
That should solve the problem for you.
Thank you.
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
-
I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).
I searched night and day for a solution - even contacted microsoft by e-mail. The specific error is: Code 57F
It is displayed when I press the "get help with this error message:
"WindowsUpdate_0000057E" "WindowsUpdate_dt000"It was the E-mail feedback:
Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.
I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.
MowGreen-
Understood the factor of masking - has considered it. Still, I send my appreciation in this matter. I would like to know if you think I should download the SP2 for Vista.Peace-
MattService Pack 2 offered by Windows (automatic) update yet?
Cause
This problem can occur for different reasons. However, the following reasons are the most common:- Already, you have the service pack installed and do not realize it.
- You must install another update before you install the service pack.
- You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
- Components of the system that you must have to install the service pack are not installed on your computer.
- You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
- You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack
Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:
955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
The MS KB article below has sound advice for steps, you have to take before installing a Service PackWhat you need to know before you install Service Pack 1
Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation
Start here - free support for Windows Vista service pack problems
If a problem occurs, you can also solve problems installing yourself-
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issuesMowGreen MVP Data Center Management - update of safety Consumer Services
-
Original title: trying to download
WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.
Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system. the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ? I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.
It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."
Thanks a lot for any assistance.
scate 39
Hello
· You have Microsoft Security Essentials on your computer?
If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.
You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.
See also:
You can turn on or turn on the firewall in Windows XP, please see the link below:
-
I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect
If you are running Windows XP... There is a slight chance
that by running the following command would be the fix:Reach... Start / run... and type or copy / paste the following text:
regsvr32 %windir%\system32\qdv.dll
Then... Press on... Come in...
You should see a dialog box stating:
DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful
Good luck...
There is debate on this subject in the following forum:
Windows Movie Makers Forums
An unknown error has occurred -
Receive dns error message when you try to connect to the internet.
I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this
I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.
Hi sandyrb,
- What is the error message when you try to access the internet?
- You use Internet explorer to access the internet?
- Did you the latest changes on the computer?
- What is the type of internet connection you use?
- You have security software installed on the computer?
- How do you know that the computer is connected to the internet?
Method 1
Check if the problem persists in mode safe mode with network mode and post back with the result.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 3
If the previous step fails, then reset TCP/IP on the computer and check if that helps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
How to troubleshoot connectivity TCP/IP with Windows XP
Maybe you are looking for
-
"Back" button and the buttons Add on becoming pixelated.
I noticed that my back button and my addons button in the upper right corner becomes pixelated.Here is a picture of what I see, this alone, it disappears if I open firefox safe mode. Image 1 - "back" button: http://i.imgur.com/PCc1iQI.pngImage 2 - bu
-
Tell us about your "Droid Razr"...
As a starting point for the razr coming through to the nation, it's time to get hands on clients as well as some tips and tricks. Tell us what you have discovered, your likes, dislikes, etc. The floor is open...
-
I know how to download on cd, but I don't want any of this, on cd can I copy my drive and keep it out of the pc? sure, just in case something happens... once again it.last time I lost photos and music.as I didn't save it.
-
How do I receive audio via the DVI port?
Hello. I have a HP Pavilion p6-2378, that I use as a PC Home Theather. The motherboard on this model lacks an HDMI port, which is how the rest of my system connects. I use a HDMI-DVI adapter and video works perfectly, but there is no audio data. Seve
-
Hello I know that this issue has been discussed several times, but I need a good answer for me! I have to write an app for BlackBerry and the RIM user interface classes are a little complicated. And know my boss means that it will be better to take t