Error occurring-re: application to 0x001a624b svchost.exe error

Similar Questions

• Svchost.exe Instruction at 0 x 0000000, memory could not be 'read '.

  Application error - svchost.exe Instruction at 0 x 0000000, memory could not be 'read '. My PC crasches is frozon

  You must identify which application was using svchost.exe when the error occurred?

  What you were using at the time? The error occurs on a regular basis? How long between errors?

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  It is always sensitive in this situation to achieve a malware check.

  Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

• Svchost.exe - application error... help

  I receive the following error message at startup, when I connect.  If I complete the program my computer going to be inadmissible.

  Svchost.exe - application error.  The exception of integer division by zero. (0 x 0000094) occurred in the application at location 0x001a3fe2.

  Click OK to finish the program

  Click on Cancel to debug the program

  Nothing comes up on my anti-virus.  Any help would be appreciated.

  Hello Scott, I did some research on this and found this site, don't know if they fixed the problem is related to your but you can see if the process will help. I found this on PC * Web site:

  http://www.pchell.com/support/svchosterror.shtml

  I'll do some looking and see what I can find.

  It is permanently associated with a start-up program, I would like to go in safe mode after you start in Windows, go to start then run and type msconfig. Once in the config window go to the Startup tab and uncheck all the boxes that are not essential to the system. You do not uncheck anti-virus or your spyware / malware removal software. If the system starts fine then go back to msconfig and start checking one box at a time until you get the error again. The last program box checked is the culprit and should be removed and put back in place.

  Hope this helps, Jim

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read"

  Hi, I get the error message after my system boots - svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be "read".

  And then after a few minutes it stops and restarts.
  I'm also not able to use the mouse.
  I need help with this problem
  Thank you and best regards

  Hi GeorgeMotaung,

  ·         Did you do changes on the computer before the show?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Start your computer in last known good configuration.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• At startup I get this error Message = "error in svchost.exe - application instruction to memory 0x7c919af2 who 0x00000010.the memory could not be written."

  Windows XP

  At startup I get this error Message =

  Svchost.exe - application error the instruction at 0x7c919af2 memory 0x00000010.the memory that could not be written.

  What should I do about it?

  You don't need to "try" things - you need to "do" things:

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• Svchost.exe - banner of error application the instruction at 0x5ba0ddae referenced memory at 0x00000000.

  Svchost.exe - banner of error application the instruction at 0x5ba0ddae referenced memory at 0x00000000. The memory could not be written.  Banner returns after you press ok to complete the program and cancel without debugging.  Machine will not now stop down. Tried system restore to previous date does not resolve.  Some applications work, that some do not, machine shuts himself often.  Windows Update will not work.  Operating system is Windows XP media center edition with Service Pack 3.  A short of ideas.

  It seems that my hard drive is faulty and it is originally this and quite a few other questions, I'm going to change and upgrade the operating system.  Thanks for the help.

• Svchost.exe application error the instruction at "0x001a6f95".

  Svchost.exe application error the instruction at "0x001a6f95" referenced memory at "0x000000c".

  The memory could not be "read".
  Safari.exe - application error
  the instruction at "0x00276f95" referenced memory at "0x000000c". the memory could not be "read".

  Hello

  · When you receive this error message?

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · Do you remember any changes made on the computer before the show?

  · You have to install automatic updates on the computer?

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  See: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

• Svchost.exe - application error the instruction at "0x001a61ae" referenced memory at "0x00000000".

  How to fix the svchost.exe application error

  the instruction at "0x001a61ae" referenced memory at "0x00000000".

  Hi KarenBlank,

  · When you receive this error message?

  · It is when you work with a program or a particular application?

  · Or is it during the installation of update?

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  You can check the link below: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

  If any malware or virus detected on the computer activity, run also, check and online virus scan. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

• Svchost.exe - Application error... Help please

  Svchost.exe - Application error the instruction at "0x7c923845" referenced memory at "0x00000000".

  Initially I thought that I had a virus because every time that I see this pop up on my computer it crashes and I have to restart manually. This often happens when I'm on the web. How can I fix?

  Svchost.exe is needed to start the required DLLs for Windows Services.

  Follow these steps and post, that things have "disabled" in the title of the status column:

  1. click on start

  2. click on run

  3. type services.msc

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Svchost.exe Application error - education @ 0x7c923845 referenced memory @ 0x00000000 could not be "read".

  error message - Svchost.exe Application error the instruction at 0x7c923845 referenced memory at 0x00000000 the memory could not be 'read' there are 2 choicesclick Cancel to complete that freezes the whole system must make a start/stop hard ouCliquez Cancel to debug and still freezes system. I noticed that I can move the notification almost window off the screen from the road and still be able to use the system, as long as I do not click an option in the error message window.

  I ran M/S FiX IT, M/S, Malware, Avg free antivirus essentials, Oldtimer, Iobit and nothing found something: of course these have not been loaded on the system at any given time. I'vd sought a malware, viruses, spyware, what is causing this and nothing

  How can I get rid of this? A malfunction of the malware/Adware/Virus/system or what it is?

  Hi stallman0419,

  When exactly do you get this error message?

  You can follow the steps mentioned in the articles below which deals with a similar question

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  You receive an access violation error and the system may appear to hang when you try to install an update from Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/927891

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• application svchost.exe, module ntdll.dll, version 5.2.3790.4789, address 0x0006beb8 failure.

  One has the solution for this error
  Failing application svchost.exe, version 5.2.3790.3959, failed module ntdll.dll, version 5.2.3790.4789, address 0x0006beb8 failure.
  I get an error at startup
  This from Event Viewer:

  Event type: error
  Event source: app error
  Event category: (100)
  Event ID: 1000
  Date: 22/11/2011
  Time: 08:06
  User: n/a
  Computer: SRV03

  Hello

  ·         What operating system do you use?

  ·         What program are you using when this event occurs?

  ·         Are you facing any specific issue on the computer?

  Please provide us with more information about the issue, so that we can help you further.

  You can check this link that looks like the same question.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/faulting-application-svchostexe/1f90d246-b834-4E51-bd8a-89333edef0cf

• Satellite P100-238 hangs after a svchost.exe program error message:

  PC: Satellite P100-238 of December 2006.

  about a minute after the start, I get an error message:

  Danish:
  Svchost.exe - programfejl
  Speicherbausteinen ved '0x745f278o' refererede hukommelse ved "0x00000000." Hukommelsen kunne ikke 'read '.
  Klik OK p for afslutte program.
  Klik p Cancel in the fejlfinding udfe I prioriterede.

  English translation:
  Svchost.exe - program error
  Statement on memory refered "0x745f278o" on "0x00000000." Memory could not be "read".
  Click OK to terminate program
  Click Cansel to to search for error in the program.

  After the error message above the PC crashes completely and I can only turn off by the power button.

  What happened with my PC?
  What should I do?
  How can I access my data to make a backup?

  Hello

  I have goggled a bit on the net for more help and I was surprised that many Windows users have had the same problem
  So I thought that there must be something wrong with the windows operating system generally.
  I studied a bit in the MS knowledge base and found this:
  http://support.Microsoft.com/kb/916089/en-us

  According to the news of MS this problem may occur when you have Microsoft Office installed and trying to the Agent Windows Update find updates for Windows Installer.

• Error number: 0x80072EFF; Fixes for Win32 and svchost.exe generic

  I'm trying to solve a problem of message and svchost.exe error Genereic Win32 and need to update windows but get an error number: 0x80072EFF, an inability to connect to the server/website updated.  I am running WinXP SP3 on a desktop computer that came pre-installed with Norton in 2005 but has fonctionnee McAfee for at least 3 years now. The firewall is through McAfee.

  Any help would be greatly appreciated.

  I am running WinXP SP3 on a desktop computer that came pre-installed with Norton in 2005 but has fonctionnee McAfee for at least 3 years now. The firewall is through McAfee.

  Assuming that the computer is not infected, the following should solve your problem from Windows Update:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now make this triple McAfee fix & restart: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NB: You have already downloaded step 2 remove the fix tool in my # 1 step b above.

  5. now to reset Windows update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in the default and aggressive modes]
  http://support.Microsoft.com/kb/971058

  6. restart once again & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• svchost.exe error

  after start my xp sp3 professionial during one minute, it will display an error svchost.exe - application, the instruction at "0x012becb3" referenced memory at "0x00000000". the memory could not be 'written' I tried to click ok or cancel, it will popup after every minute and sometimes with a different error code. then popped up, I can't access my computers in the workgroup. I turned automatic updates off already.

  Hello

  Run Malwarebytes in safe mode as suggested.

  The following link explains (if you can understand what that means?) Event ID: 63.

  http://support.Microsoft.com/kb/891642

  Hope this helps

  Kind regards
  Chauvet J.