Error of 4500 HP all-in-one wireless Wep

Similar Questions

• HP Envy 4500 e-all-in-one: 0XB0595DD2 error Code

  Hello

  Can anyone help identify this error code and a possible resolution? I plugged my printer yesterday and the 0XB0595DD2 error message came immediately. I turned the printer on and off a few times, but it happens every time (the printer was not connected to my laptop). My printer is the: HP Envy 4500 e-all-in-one, model no SD-GOB-1301.

  Thank you.

  Reference:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• want to 4500 printer all-in-one: Printcartridge can't move

  I get the print cartridge cannot move. I can move it freely, and when the printer starts the move cartridge but not when printing. I cannot detect paper jams and removed the cartridges and installed it again. I was in the middle of printing several pages when this error came. I updated the software and restarted the printer several times without success. It is fixed on my own or I need to find a repair shop?

  Hi @michiemom,

  Welcome to the HP Forums!

  I noticed that your ink cartridge cannot move with your HP Envy 4500 printer. I'm happy to help with this problem!

  Please try the steps in this guide, A 'transport Jam' Message Displays HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage 3540 e-all-in-One Printer Series, if it does not solve your problem, the printer will need to be repaired or replaced. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• 6500 printer all-in-one wireless

  I am a 73 year old who has learned to use a computer later than most. I know not enough for operating a computer, but I am not a technician. I bought a 6500 all in one wireless and worked with her for two weeks and could never make it work so I took it back. I love what did the printer, if only I could get it to work properly. I don't know that I'm the problem and not the mechanism.

  When I loaded the software on two computers, they would work wirless, but the bureau which has been connected to the router does not recognize the printer. After that all efforts exausted the mistake of reinstalling software would be developed. If I used the usb cable to load the software into the computer connected to the router, it would work, but the wireless would not work. Same error message. After thinking about this topic, I think I told the installer to use the usb cable in the router computer which clogged to the top of the installation wireless for the other two and the opposite for the spoiled wireless units a cable installation. I never tried plugging the eithernet cable.

  I would like to start again and see if I can feel comfortable to install. If so, I'll go and rebuy to the printer.

  My situation: I have a desktop Dell that is connected through router a BEFW 11 S 4 Linksys. My incoming signal is provided by Charter Communications cable. I have another unit of Dell desktop at home and a laptop that I want to connect wireless.

  Question: Can I connect the printer directly to the router with an eithernet cable and run the other two wireless units? I learned by a sales person (after that I came back from the printer) that if I simply connected the printer to the router thur the eithernet port it would be on my network and the Bureau recognise. Then the other two computers would connect wirelessly.

  Had no answers. Did you get any help. The printer took over and my money back. The pain is useless. Thank you very much.

• HP Envy 4500 printer all in one

  My Hp Envy 4500 printer all-in-one lights up not down IT. If I unplug the power cord, then plug it back it then the printer lights for about 14 seconds and then turns off.  Any ideas?

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

  Mac OS X 10.6.8

  HP Scan app 4.4.1

  In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

  Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

  1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
  2. Click Save .

  Hi milolo,

  Thanks for your post and welcome to the HP Forum.

  Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

• Impossible to install my new HP Deskjet 3545 printer all-in-one wireless

  I bought the printer HP Deskjet 3545, printer all-in-one wireless on August 13, 2014. When I tried to install the printer for USB connection after downloading the software from the CD provided with the product, it displays the message... "" Cannot install hardware, module HP Deskjet series 3540 is not found. ""  Help, please

  Problem solved.  Problem was with my operating system.  Upgrading to windows 7 and the printer is installed. Thank you all.

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• 4500 e all-in-one desire: ePrint (Google print clouds) does not work

  Hey, HP Experts.

  Thank you very much for the maintenance of your answer!

  It happens that I have a problem with HP ePrint. I can't print to my printer. I checked on the trendy Center of HP printer and it say that it is ready to print.

  The printer goes through Google Cloud Print, so that chrome of our school books can print. Just stoped working last night.

  On printer copy works but remote printing is not.

  Data sheet:

  Want to 4500 e - all - in - one

  IPv4 network

  Customers of Google Chrome OS

  Google Cloud Print

  My brother has solved the problem:
  He has disabled the ePrint service and raise it. It has generated a new emailaddress and he relinked it could Print. We tested a page to print and it worked! Thanks for your help!

  I sent [email protected] but I got no reply apart from Claris emailer auto response that my email has been received. I did not like this... I was ~ 2 weeks.

• HP Envy 4500 e-all-in-one: HP Envy 4500 print size

  Since I installed this HP Envy 4500 e-all-in-one printer, it prints in small text. I went to tools, options and preferences and can't seem to find a way to change the print size. Any suggestions? Thanx

  Hi @husky52358,

  Thank you for visiting the Forums from the HP Support! I see when you print to your HP Envy 4500 text is very short, you tried to go into the preferences and options without success.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• ENVY 4500 e-All-in-One-Series: 4500 want don't scan text to produce a searchable PDF file

  I used to have a printer Photosmart 4400 C that would allow me to scan to produce searchable PDF files, i.e. I could select letters or words in a text selection tool in my PDF reader.   Today, I just bought a DESIRE 4500 e-All-in-One-Series.  It will scan only text to give me a graphic PDF that is not searchable.  I've updated to the latest version of the EN4500_198.exe driver, but it does not help.

  Does anyone have a solution?

  Hello

  No, the 4500 desire doesn't have any default OCR software, you will have to pay for the software and believe it or not, that the software is more expensive than the printer itself. You can buy the software or you can try to use some free software around:

  http://www.techsupportalert.com/best-free-OCR-software.htm

  Kind regards

• HP Envy 4500-e all-in-one: scan PDF

  If I analyze the PDF document, I have to key in the "HP Print Wizard - Scan - PDF". Is there a way to shotener to do this?

  Hi @ekag,

  Welcome to the Forums of HP Support!

  I noticed that you wonder if there is a faster way to scan a PDF document with your HP ENVY 4500 e-all-in-one printer. I'd be happy to help you with this.

  What I recommend that we do is to add the HP scanning icon to the taskbar.

  To do this: Open file by dragging it from the edge Explorer screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), registering file Explorer in the area of research and then by typing or clicking on File Explorer. Source

• HP6500 all in one wireless Cup middle of page

  We recently bought an all in one printer wireless hp 6500 for my work, after the support of spending 2 days on the phone with tech we have installed, it worked great until we went to print from our quickbooks and it will show only half of the page... and I don't think its quickbooks because it does randomly with other programs. I really need a solution and don't want to call technical support again. Help!

  Only, we got rid of our nightmare week 2 HP 6500 all in one POS... We have replaced by the Lexmark 7600 Series all-in-one wireless and absolutely NO problem installing or printing, scanning, fax, copy and it was cheaper to boot. DO NOT BUY HP WIRELESS PRINTERS!

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well