Similar Questions

• Is it possible to receive an error message "glue code"?

  Hi all

  I wrote a script that applies styles using xPath using two modes:

  • XML-rules
  • evaluate the xPath expression

  For example, I want to get the first book element that is the child of the bookstore element:

  / bookstore/book [last ()]

  It works in mode 'evaluate the xPath expression.

  

  If no items have been found, the script displays an alert.

  

  But it does not work in mode xml-rules because, as far as I understand, last() don't is not supported in xml-rules so he silently generates an error. Accordingly, nothing happens (no warning will appear) when I click on the "Search" button and no match can be found.

  

  Kind regards

  Kasyan

  Hi Kasyan,

  I dropped it just look at the glue code and any catch statement throws an error in cascade until the initial code. If the error comes to be notified at the first level. However, in a scriptUI environment, such an error can remains silent. My guess is that there is a bug in the ScriptUI layer that does not address the errors at some point (it is my feeling, not a statement).

  Have you tried a global try catch on your appeal? Try to put some logs in there and see what happens. Once more, the error should bubble up to the main appeal according to the impelmentation of glue code.

  In addition, you can try to run your code without going through the user interface.

  FWIW,

  Loïc

• Recently, a problem began when I cut-and - paste into a new E-Mail. Sending error. Message indicates error attaching "call_skype_logo.png." File not found

  The message send failed.
  There was an error of fixing call_skype_logo.png. Please check if you have access to the file.

  I did not indicate the Ctrl + V, I suggested that Ctrl + Shift + V, and if I didn't, it was a mistake.

  What is happening is that information from the copy of the web page contains an image that is not visible and can be invoked with javascript. Thunderbird is sticky to ok, but when you try send this image (common, through the internet, as Skype image that appears with facebook, twitter etc. can not be found. I don't really know what code complex your copy and paste and I doubt you do one. CTRL + SHIFT + V just glue the text without frills. Nothing else and should have no problem at all because the reference to the image should be absent.

• Firefox does not load since I switched to permanent private browsing. Errors of the console.

  I have a Mac OS X 10.7.5. Firefox opens but to hang with a new tab empty and spinny death reel. No error message and I have to force quit to exit. Here's what I've done so far:

  Expected.
  Restarted the computer.
  Updated my java applet and then restarted.
  Scanned for malware with Avast and ClamXav.
  And no, not a connection problem.

  Here's what my console says of the last attempt to open Firefox...
  01/04/15 3:49:41.000 PM kernel: firefox (map: 0xffffff800b49e1d0) triggered DYLD shared region unnest for card: 0xffffff800b49e1d0, region 0x7fff84800000-> 0x7fff84a00000. While it is not abnormal for debuggers, this increases the system memory footprint until the target ends.
  01/04/15 3:49:43.163 PM [0 x 0-0x3e03e].org.mozilla.firefox: impossible to find nss3 in the installed directory, check the system paths.
  01/04/15 3:49:43.163 PM [0 x 0-0x3e03e].org.mozilla.firefox: Observatory SSL: could not initialize the component NSS: error: could not open the libnss3.dylib library
  01/04/15 3:50:05.569 PM [0 x 0-0x3e03e].org.mozilla.firefox: [NPAPI 788] #! ABORT: Abandonment on channel error. : file builds/slave/rel-m-rel-m64_bld-000000000000/build/ipc/glue/MessageChannel.cpp, line 1591
  01/04/15 3:50:05.569 PM [0 x 0-0x3e03e].org.mozilla.firefox: [NPAPI 788] #! ABORT: Abandonment on channel error. : file builds/slave/rel-m-rel-m64_bld-000000000000/build/ipc/glue/MessageChannel.cpp, line 1591
  01/04/15 com.apple.launchd.peruser.501 3:50:05.570 PM: ([0 x 0-0x3e03e].org.mozilla.firefox [785]) Exited: completed: 15
  01/04/15 3:50:05.947 PM com.apple.spindump: Firefox [785] Impossible to symbolicate

  Can someone familiar with decrypt this and help out me? Thank you!

  Maybe try a new profile with the same parameter could determine if it is a question of corrupted profile:
  Use the Profile Manager to create and delete profiles Firefox

• OfficeJet v40: Officejet v40 error: Align page not detected

  Installed the new blk print cartridge.  "" "" Printed alignment page. "" "  Walked through the ADF page.  Receive the error msg: Align page not detected.  Have tried several times.  Also the unit unplugged/replugged.  I hit Cancel and msg say to run the alignment.  In a loop.  Has no other problems and the printer works very well so far.   Attached to an XP box.   Help!

  Hi @US76MC,

  Welcome to the Forums of HP Support!

  I understand that the alignment will not end on all-in-one printer, HP Officejet v40. I will definitely do my best to help you.

  This problem could be related to levels of ink or printer might complain that the cartridge is older. You can try to bypass the alignment process in based on Enter and Setup all the menu on the front panel of the printer.

  Here is another post related to this topic:

  Looks like your paper (also used for alignment) sensor being damaged. This majority happen usually when the lens of the sensor alignment becomes dislodged, perhaps due to a paper jam. The sensor alignment is in a small black rectangle on the right side of the cart. If the plastic lens is dislodged from the probe, he can be stuck on a few points of glue, or a new sensor can be ordered.

  Source, published by my colleague Bob Headrick.

  In addition, please see this post by my colleague DexterM, you have a misalignment?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __

  "windows couldnot start because the following file is missing" c:/windows/system32/config/system.
  This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
  Please help everyone,
  no case I found the solution to this particular problem.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  
  Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545.  You are likely to be in for a frustrating waste of time and might just make things worse.

  Always, always, always start with a chkdsk with first error correction.

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Receive the Error Message When you try to activate

  I had a disk crash hard and after repair of the drive, I reinstalled Vista Ultimate SP2. Now when I try to activate, I get the error message that the product ID is alread in use. What should I do to reactivate my software. It's black, real retail box version with original product id always sticker glued to the box.

  Hello

  It is used by the earlier original installation.

  Make a phone activation, ignore auto guests and brace yourself for a real person explain your situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Error 0x8007007E: the specified module could not be found. -Cannot add information to MP3 files.

  I use Windows Vista Home Premium - I get this error message when I try to add information to the MP3 files that have been downloaded.  MP3 CD files are fine, but the albums that i've got from amazon/play etc have no song on them information.  It's just empty.  It comes to getting the error message:

  Apply the properties file
  An unexpected error prevented the operation.  Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0x8007007E: the specified module could not be found.

  I downloaded a converter of flac the 21 day trial yesterday for a few songs that I had been sent - after I had converted to them I realized how stupid could download a trial for a product, then I tried to delete the folder.  One of the files inside not to remove (I finally got rid of him after cutting, gluing then delete), and this is after I initially deleted the contents of the file converter flac mp3 information has been destroyed and would not change.

  If anyone has an idea how to solve this problem - or even about what exactly I did to cause the problem - please help!

  Hey
  Try the steps in the article

  http://www.ehow.com/how_5705635_correct-tags-Windows-Media-Player.html

  Bravo!

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.

• Error during installation of the agent on the monitored host Manager

  Hi all

  All in SOLARCOSY a manager of the agent in the host control, we are faced with this problem. Please could someone help me on this ASAP.

  Please find the attached screenshot.

  Kind regards

  Shiva G

  Please check this article, he talks about a similar error start agents, the solution may be the same

  https://support.quest.com/SolutionDetail.aspx?ID=SOL116611&PR=Foglight

  • Title

    Cannot start agents on Windows FglAM: no memory buffer space available JVM_Bind

  • Description

    Agents installed on an Agent Manager of windows may not start. The following errors appear in the journal of FglAM:

    2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - cannot start
    java.net.SocketException: no available buffer space (maximum number of connections reached?): JVM_Bind

    2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - an unexpected error has occurred which may cause undesired behavior. You can contact Quest Software customer support if you see this error again: could not stop the native Launcher
    java.lang.NullPointerException

  • Cause

    The number of ephemeral TCP ports by default is 5000. Sometimes, this number can be less if the server has too many active client connections through which ephemeral TCP ports are all used to the top and in this case no more can be allocated to a new client connection request.

  • Resolution

    Resolution

    The solution is to open the registry editor and look for the registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and add a new entry, as shown below:

    Value name: MaxUserPort
    Value type: DWORD
    Value data: 65534

    Workaround

    Restart the Agent Manager Foglight

  • More information

    Ref: http://support.microsoft.com/kb/196271

• Foglight Agent error manager and Agent infrastructure

  I get the following in the Foglight Agent Manager error message:

  ECHO myWindowsAgent > com.quest.remoteos.SystemMonitorImpl ERROR [Quartz-1] - unable to connect to . No data has been collected.com.quest.glue.api.services.RemoteConnectionException: a connection could not be established

  Also when you try to add a single host to remotely monitor I get the same error message.

  I checked the credentials and they are correct... any ideas how to solve this problem?

  See if this article helps you, as he mentions it exactly the same problem (3 types of problems, it's too long to copy/paste).

  https://support.quest.com/SolutionDetail.aspx?ID=SOL92051

  Also, please check the release notes troubleshooting section because it may be a problem getting WMI wogs.

  http://eDOCS.quest.com/Foglight/567/files/CartridgeForInfrastructure_567_ReleaseNotes.html

  Troubleshooting

  This section provides a list of references that deal most often face questions about remote connectivity, which allows easily using the information provider knowledgebase or Foglight documentation for troubleshooting:

  • To check the WMI connectivity using a built-in utility for Microsoft Windows, see http://technet.microsoft.com/en-us/library/cc180684.aspx
  • To troubleshoot WMI class access permissions, see http://blogs.technet.com/b/askperf/archive/2007/08/14/wmi-troubleshooting-permissions.aspx
  • For more information about connecting WMI in Windows Server 2003/Vista and later versions, see http://msdn.microsoft.com/en-us/library/aa822854 (VS.85) .aspx
  • For WMI troubleshooting tips and techniques, see http://msdn.microsoft.com/en-us/library/aa394603 (VS.85) .aspx
  • To fix these problems that may occur when you connect the WindowsAgent infrastructure to a remote host, see the section "Windows-specific Configuration > troubleshooting Windows Agent questions" in the Setup Guide of the Agent Managerof Foglight.

  Golan

• Errors LinuxAgent

  We are installing Foglight 5 with HostAgent cartridge and receive these error messages.

  VERBOSE [Quartz [0] - 1] com.quest.glue.core.remoteconnection.SSHConnectionServiceImpl - connect to server_name.com:22 using the login/password authentication

  VERBOSE [Quartz [0] - 1] com.quest.glue.core.remoteconnection.AbstractConnectionImpl - use default connection timeout of 60, 000ms since no time-out set.

  INFO [Quartz [0] - 1] com.quest.remoteos.collectors.linux.LinuxCollector - IO by process stats do not appear to be enabled on this core and will not be obtained.

  ERROR [Quartz [0] - 1] com.quest.remoteos.collectors.linux.LinuxCollector - could not process metric query command: / sbin/ethtool eth0. Error: the process is completed with the code 75

  INFO [Quartz [0] - 1] com.quest.remoteos.collectors.linux.LinuxCollector - use of bandwidth and network are not available (one of the utilities of mii-tool or ethtool must be installed and operational and - if not use root credentials - executable without password to sudo).

  ERROR [Quartz [0] - 1] com.quest.remoteos.collectors.linux.LinuxCollector - could not process metric query command: / sbin/ethtool eth1. Error: the process is completed with the code 75

  Has anyone go through this problem?

  TIA,

  Michael

  You need to enable statistics IO by process at the kernel level to resolve the stats of IO by process of message do not appear to be enabled on this core and will not be obtained.

  David Mendoza

  Foglight Consultant

• "BOLD" of Smartphones blackBerry displays serious error - IllegalArgumentException event log

  I was watching the "BOLD" error log and I came across a couple of fields marked "serious error". It seems that it is because of some kind of rendering on a modal dialog box, but I don't know exactly how to read the newspaper very well. Here's the glued log entry. Any ideas?

  Name: IllegalArgumentException

  GUID: 9c3cd62e3320b498

  Time: February 5, 2009 11:26:33

  30

  net_rim_cldc-10

  ObjectChoiceField

  getChoice

  0x6B9C

  net_rim_cldc-9

  ChoiceField

  0x6FF6

  net_rim_cldc-9

  ChoiceField

  getWidthOfChoice

  0x63F2

  net_rim_cldc-9

  ChoiceField$ ChangeOptionChoiceField

  getWidthOfChoice

  0x71DF

  net_rim_cldc-9

  ChoiceField

  0x6F3C

  net_rim_cldc-9

  ChoiceField

  moveChoiceFocus

  0 x 6498

  net_rim_cldc-9

  ChoiceField$ ChangeOptionChoiceField

  moveFocus

  0x73B2

  net_rim_cldc-8

  Manager

  moveFocus

  0x4E7C

  net_rim_cldc-8

  Screen$ NavigationMovementFocusSelector

  Select

  0xABC3

  net_rim_cldc-8

  Screen

  0xA40D

  net_rim_cldc-8

  Screen

  navigationMovement

  0x9AED

  net_rim_cldc-8

  Screen

  dispatchNavigationEvent

  0 x 8098

  net_rim_cldc-9

  UiEngineImpl

  processMessage

  0x9B41

  net_rim_cldc-6

  Application

  processNextMessage

  0xF06

  net_rim_cldc-7

  ModalEventThread

  run

  0x43EF

  Hello

  Outside of a technician certified to the RIM, I know most of the people can read and understand.

  I love you feared when I read on the curve and the storm.

  Although this indicates a serious error, I have not experienced the loss of function with each device.

  Every day I receive a severe message related to Javascript.

  I hope this helps!

  Thank you

  Bifocals

• Apps of the trial error 0 x 80080206, 0x80073cf9

  I encountered the following problem on my RT Surface recently trying to try two apps on the Windows Store.  I was trying to install/trial apps to the using the Wi - Fi connection in the library during a stop my RT Surface (I would have kept a look the best on the battery power).   Now when I try to re - download apps, I get the below error messages.  I was wondering what is the solution for this sort of thing if it was to happen again (and I'm always curious about these two apps).

  Surface RT

  Error code: 0 x 80080206

  Apps:

  * Monster Island

  * Ilomilo (error code 0x80073cf9 - the last time I tried)

  Tried:

  * Re-download

  Store Cache reset (Windows key + R, and then by running wsreset.exe)

  Well, I found a solution for this problem, 0 x 80080206, specifically which I think can solve other cases. Given that, in my view, this code is brought by corrupt packages and that the names of store with random numbers, stored in a logfile God knows where exactly inside c:\windows\system32\catroot 2, the best way would be to delete the files and start again, of course before you start this cancel any application installs underway.

  1 - restart in safe mode
  go for via the search charm to reboot step forward, set settings as the laptop, then on the screen with new one advanced restart, after restarting your pc, press 4
  2 - go to C:\Windows, and then rename C:\Windows\SoftwareDistribution in SoftwareDistribution.old
  3 - go to C:\Windows\System32 and rename catroot2 in catroot2
  4 - restart your pc in normal mode (simply select restarts as you normally would) go to windows update in Control Panel, select windows update, change settings and activate Microsoft update
  5 - Select search automatically updates (should take about 5 minutes even on good internet)
  6. open the windows store, select the charm of settings, select app updates and synchronize licenses
  7. right click, select my apps, download the applications you need and voila they should start to download (note that they can be glued on in the meantime up to 5 minutes)

  PS: 1 - it worked for me when I had a problem with freshpaint, I am downloading right now, so I know it works: p, good luck anyway :)
  2 - If you find a better solution, then by all means to talk about it
  3-If you are on the internet wrong which is without doubt you for lack of the carrier (and yours) not windows
  4-stop the windows store and update services instead of restart in safe mode will isn't cutting it
  5. If everything fails do a refresh of the system, reinstall or forget the stupid app ever existed

• Of ERROR APPEARS WHEN I LAUNCH MUSE SITE IN BROWSER: MuseJSAssert: error calling the function switch: TypeError: undefined is not an object ('jQuery.browser.msie' assessment)

  Hello

  I am at a loss why I get this error - I thought it might be hyperlinks on the page so I stripped all the links page to other pages I've had more than a month to is rearranged pages - and even removed from the homepage and glued in place - but this issue has not changed - how bad can I turn this extra - the error is so vague and make no mention of what that either I can target - any advice would be welcome.

  
  Jay

  Please try to re - publish the site, download all the files manually using any FTP client and then check.

  If still the same issue, we provide the url of the site.

  Thank you

  Sanjit