Error of keyboard on Tecra M2

Similar Questions

• Replacing keyboard on Tecra A8

  I have Tecra A8-143 2007 and problems with letters on the keyboard. Some of them do not meet all (d, j, Del,...). And the keyboard is very dirty. I'm in Sarajevo, what should I do? Clean or replace the keyboard if it is possible?
  And I am no newbie, was simply inactive.

  In my opinion, you must replace the keyboard. Get a new key?

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)

• Strange keyboard in Tecra S1 problem

  I have a problem with my Tecra S1.
  When I type a J I'll get 4 characters "qsd."
  With the am 'it gives' xcv. All other keys are ok...?
  I have the air of the keyboard is programmed or...
  When I boot with a bootable cd, I also get this problem...

  (Sorry for my bad English... :))

  Who knows about this problem?

  Thanks in advance!

  Hmmm. have you activated the keyboard FN + F11 or FN + F10 options?

  Notwithstanding these option may be enabled everything looks like a malfunction of the keyboard. In the worst cases, the keyboard needs to be replaced!

• Keyboard with Tecra A10-112 problem

  I got my laptop Tecra A10 - 112 today and the first thing I noticed is that the keys 'L', 'R' and 'Y' makes very annoying loud clicking sound whenever they are turned on.

  There is no quick fix for this?

  > Toshiba has begun to moderate the Forum now and already denied my last post about the tightness of the A10 to publish screen
  Do you hear this announcement? I think you're a bit confused
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=133178#133178

  This user forum is free and you can post anything you want, but I think you should be objective.

  > The model number you have listed is not yet available in the United Kingdom as far as I know. I was a happy with Toshiba customer, until I bought A10 - 112.
  Looks like you n t know that Toshiba offers different laptops in the different countries and each can series supports of different specification.
  So maybe this A10-112 is not distributed in the United Kingdom, but in other countries. I don't know that other A10 with similar specs can be purchased in the United Kingdom.

  Sorry I m not owner of the A10, but one of my friends bought this laptop and he asked me for the configuration.
  So I know that it is a laptop really good for the market with new features

  I respect your opinion, also because everyone can have different opinions, but don t forget to be objective
  If there is a hardware problem with your keyboard, ask for replacement!

• Keys on the keyboard in Tecra A2 typing symbols hurt?

  Hello

  My apologies for what is probably a stupid question.
  I have a Tecra A2 and run XP proffesional.
  Suddenly some of the key type different symbols than those indicated on the keys.
  Pleeeeze tell me how to reset the default keyboard.

  With our thanks, Danny.

  Hi mate,

  It could be that you have a bad keyboard map. A keyboard map is like a project for your hardware that identfies which tank is displayed when you press a key on your keyboard.
  A language that you use so if the symbols on the screen do not correspond to the entrance of your typing, then it could be that a bad keyboard map is defined depending on the keyboard maps.

  In this case, you will need to define another language of keyboard.

  To change the keyboard mapping, you must proceed as follows:
  Click Start-> settings-> Control Panel-> regional and language options-> click the "Languages" tab--> details-> choose your input language that matches your keyboard

  Good luck and good weekend

• Re: size USB keyboard for Tecra A8

  Looking for a USB for a Tecra A8 with keyboard keyboard more like desktop computer; Delete key at the side of------and large locks cap key further away from the key. Other issues of layout is not a problem.

  Hello

  Akuma has suggested you can use any USB keyboard as you know that there are several different keyboards with many different features
  Pick one, buy one and simply connect it to the laptop USB port.

  All that s

• All the prams of keyboards on Tecra R850-S8540

  The original keyboard replacement, that I installed, and occasionally the USB keyboard type at random, erratic fail to record the orders and lag.

  This has happened in windows 7 and continued in 10. I have removed the keyboard and cleaned with compressed air, and installed the latest drivers for chipset for my model, but still have problems.

  Names Device Manager like Lenovo ThinkPad PS/2 keyboard keyboard. .

  The lenovo is no external USB keyboard?
  The internal keyboard should be: Standard PS/2 keyboard

  Remove all drivers keyboard and external mouse (Logitech etc...).
  The internal keyboard could have a spill of liquid.

• Withdrawal of the keyboard on Tecra 9100

  Several keys have stopped working - no idea how to get down the keyboard to make sure nothing is stuck below?

  I am really skeptical that you will be able to fix simple buttons and are may need replacement keyboard. The replacement is not complicated and you can do it alone. If you need more help please write again.

  Good bye

• Error of modem on Tecra S1

  Hello
  My modem does not work and is not more than a year. (Windows XP Pro SP2)

  When I questioned my internal modem, I get this error message:

  The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional.

  The log reads as follows:

  File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
  File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
  File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
  File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
  File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
  File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
  File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
  Modem type: TOSHIBA software Modem
  Modem inf path: agrmdwxp.inf
  Modem inf section: INTEL_AMR. Modem
  Matching hardware ID: PCI VEN_8086 & dev_24c6 & subsys_00011179
  Opening the modem device failed with error 000005aa

  Can anyone help with this.

  Richard

  Hello

  Try to remove the modem from Device Manager (uninstall the modem driver)
  Reboot the laptop. At the beginning the operating system must report founded new hardware (modem)
  Go through the installation process and install the modem again.

  By the way; You can download the latest version of the driver (if available) of the Toshiba driver page

• Question about keyboards keys Tecra A3

  I have a whole new Tecra A3 and when you type certain keys randomly will work. Occasions, I can type or press a key several times until it works.
  Is there something I can do before I return it to the dealer?

  Hi Bob

  It's really not easy to say why this is happening. The only thing you can try is to reinstall the OS using the recovery CD.

  In my opinion it shouldn't happen if the unit is a new brand. Please contact your dealer and ask him if you can have another. You paid for a new product and it should work properly.

• How to change the keyboard on Tecra S

  Hello

  I need a little help to replace my broken keyboard.
  I have not found any procedure here or in the user guide.

  Who is screwed, I have to remove to change the keyboard?

  Thanks for your help

  Yves

  Myself and others here are not clairvoyant so maybe you could post your model of laptop. ;)

• Error Vista crcdisk.sys Tecra A4

  When the beta version of Vista came out several people had problems installing where start-ups would stop at the first reboot to "crcdisk'sys '.

  I followed the MS forums, but also here, but never found a solution.

  Has anyone installed Vista Beta on a Tecra A4 again? If so, what is the secret?

  Any help appreciated

  Salamat

  Just downloaded and installed build 5536 and still no change... can't get through first boot and safe mode always stops to "crcdisk'sys '.

  Someone at - it suggestions to get around this please?

  Salamat

• Error Vista crcdisk.sys Tecra A4 - solution

  Hello world!

  I have create this post to share my experience of installing vista on a Tecra A4 (tecra a4 257 to be precise)

  to be brief, the first time that the installation of vista freeze, it is on the famous "crcdisk.sys" in safe mode
  ---> solution: reboot on the installation DVD and go to "repair my computer" then the command prompt to delete/rename \windows\system32\drivers\pcmcia.sys and \windows\system32\driverstore\filerepository\pcmci ablablabla

  But even after that, I'm not able to complete the installation because I uncounter the famous 'black screen of death' (more precise, after the first restart, Setup will "finish installation" and after a while, the screen goes white and my laptop freeze without HDD activity more)
  ---> solution: after remove/rename pcmcia.sys e.a., delete/rename all the files on your Texas instruments PCIxx21 because it is this f * ing material that make vista freezing!

  so I renamed all the files in the windows\system32\drivers folder named * 1394 * (for firewire controller that belongs to a TI PCIxx21) as well as in the \windows\system32\driverstore\filerepository\ and \windows\inf\ folder
  I have renamed in the same files all files named sd * (for the reader of card memory, another part of TI PCIxx21)

  After that installation is finished and I was able to see vista and aero for the first time (sniff...)

  I hope that someone help :-)

  Sly

  Nice tips.
  I think all information on Vista are very useful to us because it s a new OS and there are always a lot of questions.
  Thank you very much.

• Failed to start error status: 0xc000000e on Tecra M

  Dear all,

  I'm a Newby.
  My Toshiba Table M with recently installed Windows 7 series (it was fine with Vista) have a boot failure.

  The message is this:

  Windows did not start:
  File: \boot\memtest.exe
  status: 0xc000000e

  Info: The selected entry could not be loaded because the application is missing or damaged.
  I went to the BIOS and enabled the diagonstic tool. When I restart - it tells me memory is OK and the HARD drive is OK.

  Now it tells me to insert the Windows Setup disc - which I don't have yet.
  I created the backup of the registry and backup of the C: drive - but each of them in the D: drive - which is now useless.

  I would very much - if you could give me some solutions to this problem.
  I'm looking forward to hearing from you all and thank you in advance,

  Rana

  Hello

  Maybe you could fix the Windows 7
  By turning on the device, please press F8.

  Now, you should get an advanced boot menu.
  As far as I know there are some option like fix my computer.
  Check it out

  If this is not enough, then you should take a Windows 7 disc and should reinstall the OS.