Error of start of Service TEO
Hello
I tried to start the TEO server on my virtual machine... for that I want to start service of TEO in Services option... I select service and try to start but I got error: Error 1053: the service did not demand launch or control in a timely.
someone has the solution for this error... Please share... .i like you...
Kind regards
Floriana
could just be a waiting period of service (common in windows server 2008)
But I see you opened a case on this issue, he has been assigned to Seann Ritzman, it should be in touch quickly. I suggest you gather newspapers for him.
Go to start-> programs-> cisco-> TEO-> diagnostic utility and run it with the default values and save the compressed file it produces.
Tags: Cisco DataCenter
Similar Questions
-
Microsoft automated troubleshooting error attached start-up services has stopped working
I would like someone from Microsoft to please solve this problem once and for all:
"microsoft automated troubleshooting error attached start-up services has stopped working.
I tried the fix and nothing works... Please help
Hello
Have you tried the steps in the Microsoft article that was provided in the previous post?
Please meet us, so that we can assure you that the problem has been resolved or not.
For more information, see this article: http://support.microsoft.com/kb/555375
-
DSC error: IAK_SHARED failed to start the service
When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service. I'm using LabVIEW 8.6 with DSC 8.6. I tried to run one of the examples (the example of the heat exchanger). Any ideas? I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC. Shall 8.5 DSC be uninstalled everything first?
Thank you
Tom
Hi Tom,
This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.
Gregory C.
-
I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?
Hello
Your question is beyond the scope of these forums.
Please use the following links for that matter.
Network Infrastructure servers Forum:
http://social.technet.Microsoft.com/forums/EU/winserverNIS/threadsCategory of the Windows Server:
http://social.technet.Microsoft.com/forums/EU/category/WindowsServerConcerning
-
Error 6 - the handle is invalid when you try to start the services.
Error 6 - the handle is invalid
HII
I really need help
If you sat down me - it would be great.
in my organzition - 5 different computers - all THE of THEM with the HELP of Win Xp Sp3
started having error - error 6 - the handle is invalid
When we want to start very imporatnt services
print spooler
the Windows Installer
EXC
When we try to start these service - we get the error - thT THE HANDLE IS INVALID - ERROR 6
and the service - was able to start10 x in advance
Thank you very much
We have made the controls more
is it was the fault of the Anti Virus
We always face the problem - but we know who is to blame
We use the endpoint of Symantec Enterprise solution
When we disabled anti virus service - other services began to operate properlyWe contacted Symantec support to see if they have a solution to the problem
really 10 X -
Original title: could not start the Service "Windows Defender" (WINDEFEND)
When you try to install Windows Defender, I get an error message that
"Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.
How can I check which privileges I have and I need?
I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.
Help please
Hello
This error message is because you have Norton installed on the computer. See the for more information section below.
http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_USLet's try the steps and check them off below if it helps.
Step 1: You can try to uninstall Norton and then check if the problem persists.
Note: Reinstall Norton after verification.
Reference: http://support.microsoft.com/kb/307895Step 2: Change the registry value and check.
a. Click Start, type regedit.exe and press ENTER.
b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
d. enter 0, under value data, and click on the OK button.
e. close the registry editor.
f. restart the computer.Registry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Update CPU which proved later to be bad. Replaced by original CPU. Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2. Integrated Service Pack 3 which I got from the MS. site Everything works well except for Windows Update. The setting seem to be correct in Administrative Tools/Services. The status of the Service is "stopped". When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer» Used the range of anti-virus and malware and found nothing. Currently using Avast 7.0.1426. I also used various tools of Fix - It MS nothing helps. Any help would be greatly appreciated. Thank you.
Hello
1. what application or antivirus security suite is installed and your current subscription?
2 Norton (another) or a McAfee application ever installed on this machine?
3. What are the fix applications that you used so far to try to fix this problem?
Try the next method and check if that helps you with the question of the 127 error you receive.
Method 1: Rdding the DLL file by doing the following:
1. Click Start and click Run, in the search box type CMD and press to enter.
2. right click on CMD in the list and click "Run as Administrator".
3. type the following command and press ENTER. Regsvr32 msvcp71.dll
4. close the command prompt window.Method 2: run the file system (CFS) Checker:
(Note: you need an XP installation disk to start the System File Checker search.)
The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.
1. click on start, and in the box to start, search type CMD
2. right click on CMD in the list and click "Run as Administrator"
3. type the following command and press ENTER. Sfc/scannow
4. close the command prompt window.For more information on scan SFC (System File Checker), please look in the link mentioned below.
http://support.Microsoft.com/kb/310747
I hope this helps.
-
Original title: Journal of spooler
I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps. a. Click Start, right click on my computer and select manage. b. in the console that opens, expand the menu Services and applications. c. click Services. d. click the button twice to spool print. e. in the 'Général' tab, go to Startup Type. f. the Automatic value. g. click on the Start button. h. click on apply and Ok. Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service. Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:
Hello
1. don't you make changes on the computer before this problem?
2. when exactly you get this error message?Step 1: Run the fix it tool using the article below and check out them.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/Step 2: Try the steps from the article below and check out them.
Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
http://support.Microsoft.com/kb/915168/en-GB -
Receive the error under XP "workstation service has not yet started.
I disabled the administrator account and have no other account with admin rights I did the thing of mode without failure, but when I try to uncheck the box disable when I click on apply I get an error message (the workstation service has not yet started.) So, I have no suggestions admin right?
* original title - I disabled the account administrator and don't have any other accounts with admin rights.*
Hi Ron53,
Please see article with a possible diagnosis:
http://support.Microsoft.com/kb/314543
I hope this helps!
-
Wireless Zero Configuration Error 1068: the dependency service couldn't start.
I recently updated my network card of a TP-Link TL-WN353G to a DWA-552. Now whenever I start, I have to manually configure my wireless car does not start the automatic configuration service. When I try to start the service manually, I get the above error message. I am running Windows XP MCE SP3.
Try to check the dependencies. View the Services window:
Start-> Run-> "services.msc".
Then, double-click the Wireless Auto Configuration. When the Properties window opens, click the "Dependencies" tab at the top. Then check that these dependencies are present and active.
HTH,
JW -
Error: Server not started when Service tried to share the drives on the local working group
Original title: Server service not started
I'm sharing my discs with another computer on my LAN to the working group. An error saying: the Server service has not started.
I read the answer that you gave to use a previous restore point, but who can change my settings in the registry for other programs that were installed after the service for the Server service.
Is there another way to do it?
Hi mpccol,
This can happen if the Srvsvc.dll library is missing or damaged. Try the steps mentioned inthis article and check the result.
If you don't have a Windows XP CD, try the following steps:
a. find the Srvsvc.dll on Windows file using the XP search feature.
See How to search for files and folders in Windows XP
b. copy the Srvsvc.dll present in the i386 folder and pasted to the location:: \Windows\System32 folder.
Où :is the drive where Windows XP is installed.
c. Once you have copied and replaced the file, restart the computer and check if the problem persists.Visit our Microsoft answers feedback Forum and let us know what you think.
-
I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler. Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.
Hi Jkoryzna,
Thank you for choosing the Microsoft Answers forum.
To solve the problem, fix the dependency for the spooler service information.
Click Start, run and type the following text:
CMD /K SC CONFIG SPOOLER DEPEND = RPCSS
Alternatively, to achieve this by using the Registry Editor:
Click Start, run and type Regedit.exe
Navigate to the following branch
HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler
In the right pane, double-click the DependOnService value
Delete existing data and then type RPCSS
Close Regedit.exe.
REGISTRY WARNINGChange the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Navigate through the steps mentioned in the article below.
Solve printing problems by resetting the print spooler.http://support.Microsoft.com/kb/2000007
Let us know if this helps
Concerning
Anthony. -
Problem started when the McAfee Firewall shuts off and I could not turn it back on. Also I can't activate Windows error 0x8007042c firewall. Also no Internet access due to firewall restrictions. Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start. Strangely, the McAfee Firewall seems to be OK again?
McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.
http://www.selectrealsecurity.com/malware-removal-Guide/
I hope this helps.
-
I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get
Error 1068: the dependency service or group could not startThings I've done:- ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
- MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
I've done two things on the command line for (you) help to solve this problem:Queryex mpssvc C:\Users\Dan>SCService_Name: mpssvcTYPE: 20 WIN32_SHARE_PROCESSSTATE: 1 STOPPEDWIN32_EXIT_CODE: 1068 (0X42C)SERVICE_EXIT_CODE: 0 (0X0)CHECKPOINT: 0X0WAIT_HINT: 0X0PID : 0FLAGS:C:\Users\Dan>sc qc mpssvc[SC] QueryServiceConfig SUCCESSService_Name: mpssvcTYPE: 20 WIN32_SHARE_PROCESSSTARTUP TYPE: 2 AUTO_STARTERROR_CONTROL: 1 NORMALBINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNenetworkLOAD_ORDER_GROUP: NetworkProviderTAG : 0Display_name: Windows FirewallDEPENDENCIES: mpsdrv: bfeSERVICE_START_NAME: NT Authority\LocalServiceHelp me, please?Hello
I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.
-
Hi, I tried many things resolve. I update my Vista last Kit. I also sort things like using CCleaner RegClean Pro...
I also tried sfc/scannowand here's SOME of my journal:and you can download the entire .txt file here: http://www.box.net/shared/gco69vkso2kh2y7jaxasI also tried this:C:\Windows\System32 >netsh winsock resetUnable to load the programme of assistance following DLL: WSHELPER. DLL.Unable to load the programme of assistance following DLL: IFMON. DLL.The following command was not found: winsock reset.I also tried to run and do the MicrosoftFixit.WindowsFirewall.Run.exe nothing works.Please and thank you.Hi, Jahkr,
Log shows that you had corrupted files and components. System File Checker could not repair files try to repair the files first.
See this document for corrupted files
http://support.Microsoft.com/kb/929833
To resolve this problem, make sure that all dependent services have been started. To do this, follow these steps:
- Click Start, run and type Services.msc
- Double-click the network connections entry
- Set its Startup type to manual
- Click Start to start the service
- Double-click Windows Management Instrumentation
- Set its startup type to Automatic
- Click Start to start the service.
After you start the services of two dependants, try to start the Windows Firewall service.
Maybe you are looking for
-
Final Cut Pro 7.0.3 - filling footage - working perfectly then...
Hi Mac family, I've been editing vlogs for the last month. Everything's fine, everything worked... then... I was at the airport and to work on a vlog and bam... all my images have started late. I tried my previous vlogs to see if it was a corrupted f
-
Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software? give me the link? I need the latest package driver. -Thank you
-
I have problems with some websites, i.e. from amazon. It is said that it works better with a new version of safari, firefox, etc.I had my hard drive crash, so when I got a new installed I tried to download the latest Firefox and found it is not compa
-
CellRenderer attracts more when resizing to a list
I can't understand why the box drawn in my CellRenderer class shoot each other when resizing to height of the list. Here's the example code to demonstrate. Click resize. package { import flash.display.Sprite; import flash.events.MouseEvent; import qn
-
When I do Ctrl 'P' there is nothing in the queue
When I try to print, I think that's not queue. The printer says that there is nothing in the queue?