Error on a blue screen at startup

Similar Questions

• Blue screen on startup check drive c for errors

  Original title: I havea blue screen on startup saying mistakes c disk check was cancelled I want back this sysem also affected and another restoration things helppppppp

  I have a blue to start saying the c disk check to find errors in windows xp iwant to resume what he as affected system restore helppppppppp ted

  Hi edwardcliffe,

  ·         Have you made changes on the computer?

  ·         Are you able to boot to the desktop?

  ·         What is the full error message?

  ·         What do you mean when you say "I want to take this also affected the system restore and other things?

  If you are not able to boot to the desktop, follow the steps.

  You will need an XP installation CD to try to solve this problem.  If you do not, try to borrow one just to run this fix.

  (1) configure the computer to boot from the CD if it is not already configured in this way. You may need to enter the BIOS to configure the computer to boot from the CD.

  (2) set the boot order on:

  Floppy (if present)

  CD/DVD-ROM

  Hard drive

  RECORDING and EXIT

  (3) to start the computer with the XP installation CD in the drive. When you see the prompt «Press any key to boot from CD...» ", do and start the process to boot on CD.

  (4) when the Recovery Console option is available (press R to start the Recovery Console), do it. You may be asked to what Windows installation to enter, what kind of cases the number of the Windows installation you want to work (usually 1).

  (5) when you are prompted, enter the password for the Windows installation. If you have not set up a password just press ENTER

  (6) at the command prompt, type:

  chkdsk /r  (there is a space before the /) Press ENTER.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  If you are able to boot to the desktop, follow the steps in the article.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654/en-us

• Get the following blue screen on startup error: STOP: 0x0000007E, BAD_POOL_HEADER STOP: 0 x 00000019, IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A

  Original title: XP questions

  I am running WIndows XP Pro SP3 on a Dell Optiplex gx270s and get several error messages stop "Blue screen" intermittent and different at startup (for protect my computer). Prompt notification Windows found problems with the file system and run CHKDSK/F. I am unable to do so as I can not find my administrator password (also necessary if you plan to run from my XP installation disc). Windows Fix - It Center, running 'Folder & troubleshooting' reports icons randomly change the icons but no resolves not. I didn't notice the icons change and do not if this is related to Stop what error messages at startup, I've been doing. Running a disk check during start-up and Diagnostics IDE are not problems. It lasts for quite awhile and I've delayed just deal with it because it is not always the case. A lot of program installs / uninstalls and Microsoft Updates since its start if the system restore wouldn't do me any good. Before reinstalling the operating system, what are my options? Is there a way to reset my ' Administor password ", or better yet does not require one, (it is a personal computer for personal use only and I don't remember why a password has been assigned)?

  Here are some of the error messages:

  STOP: 0x0000007E (OxC0000005, 0x89AD8000, 0xA579CCB4, 0xA579C9BO)

  BAD_POOL_HEADER

  Technical information:

  STOP: 0 X 00000019 (0X00000020, 0X89D5FDA0, 0X89D5DC8, 0X0A050002)

  IRQL_NOT_LESS_OR_EQUAL

  STOP 0X0000000A

  (0x6750300C, 0 x 0, 00000002 00000000, 0x804FFDB6)

  Hello

  You did changes to the computer before this problem?

  The administrator password cannot be reset.

  See the following article for more information: Microsoft's strategy concerning lost or forgotten passwords

  In the following troubleshooting steps may help you resolve this problem.

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  FIX: Error Message When you connect a scanner or a digital camera to a computer that is running Windows Vista or Windows XP Service Pack 2: "BAD_POOL_HEADER STOP"
  http://support.Microsoft.com/kb/934177

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Satellite L300D c000021a (PSLC8E) blue screen on startup after win7 64 bit

  Hello

  The error code on a blue screen after startup (after loading win7 logo) is:
  STOP: c000021a {fatal system error}

  Installed Win7 Ultimate x 64.

  My bios version is 1.80

  Someone has any idea how to solve this problem?

  Thanks for help

  Have you tried to install the original preinstalled Toshiba system using the recovery disk to check if the same BSOD error appear?
  If this is not the case, do.
  This BSOD can be linked either hardware or software problem and good work and pre-configured system could clarify the situation.

• My Vista system crashes, blue screen on startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  My Vista system was crushed, tried everything, but finally resorted to a recovery of the original factory image off the coast of the hard drive Partition. Everything seemed to go smooth but now I get a blue screen at startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  Odd part is the system has two RAM slots, we have a 2 GB key and another has a 1 GB. Could not get the machine to start with two sticks in. Will start with a stick in each thin slot. Will not start no matter how they are installed if you are using the two RAM slots. Ran SFC/scannow. He found errors, that it cannot correct. How can I fix these errors?

  CBS log is large enough: what details should I post it to help you troubleshoot?

  Note: Were able to update the system, including the installation of updates Windows 128 and seems to be updated throughout the SP-2. I really don't want to run another recovery if possible.

  Thank you!

  Hello

  Perhaps you have different brands of RAM in your computer, and so it would not start with the two inserted Rams. Do a check for your specific PC memory that tells you what products work with your system.

  Follow the information in this article.
  Know what type of RAM you need

  In addition, updated BIOS.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If scan SFC did not fix the issue, I would say that you follow the steps in this article to fix it.

  http://support.Microsoft.com/kb/929833

  Regarding blue screen errors, follow the steps in this article that applies also for Vista.

  Resolve stop (blue screen) error in Windows 7

• Blue screen on startup and Vista stops

  If I try to start 5 times I could get lucky 5. Sometimes I get the option repair (not help), sometimes a blue screen; but most of the time after a few seconds of what appears to be efforts to start - silence. The blue screen is long enough to be read with error messages each.time. I used the recovery system twice. During the few times when I got there was unexpected stops with possibly the usual refusal to start/restart. Also I have known installation issues, in particular updates after sys.recovery. This is a problem! Any thoughts?

  Hello

  1 how long have you been faced with this problem?

  2 did you recent hardware or software changes to your computer before this problem?

  3. what exactly happen when you try to install windows updates? You get the error message?

  4. are you able to boot in safe mode?

  Step 1: Try using the option disable automatic system failure reboot to advanced startup options and make a note of the complete and exact error message on blue screen and send back the same. This could help us help you better.

  Step 2: If you are unable to boot into safe mode, then try to do the Startup Repair.

  I hope this helps.

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen on startup: STOP 0 x 00000024

  Working on a computer and customers when starting, it gets this error... (blue screen)

  '* STOP 0 X 00000024 (0XFFFFF880027C6E38, 0XFFFFF880027C6690, 0X00000000001904FB, 0XFFFFF8001CD008C1).
  What should I do? She has thousands of dollars photos has not printed or saved yet. She is a professional photographer.
  Thanks in advance! :) It uses Windows 7 too also and it is a Dell laptop (Inspiron) - I can not even boot in safe mode...

  Slave the drive to another computer and try to save the images.
  If it does not, consult a data recovery expert.

  Once the images are retrieved, put these free diagnostics, bootable: http://www.carrona.org/initdiag.html

  If all goes, then try the Startup Repair tool: http://www.sevenforums.com/tutorials/681-startup-repair.html

• The dreaded blue screen on startup with Windows XP

  Get the dreaded blue screen at startup. Use Windows XP and my PC of becomes as much as the screen connection, but when I select my login name, that the blue screen appears. If I choose one of the other names the process gets a little further, but the blue screen then appears. I can login in safe mode and that you ran some diagnostic tests, but the problem persists.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  If would know more about your system and that the Blue Screen of Death (BSOD said):

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:
  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg
  Send for the nose and the Red arrows (3 to 4 lines total).
  Send all * line STOP message since there are clues in the 4 parameters.
  If there is a name of the file listed in the STOP message, don't forget to include this information too.

• Need to solve an Error Message 7B - blue screen of death/boot loop

  Hey community,.

  I need help. I'll try to find a way to resolve the error message on blue screen 7 b on a laptop HP Compaq 6710 b using XP, but he took trapped in a loop of boot BSOD and I can't access the command prompt to try to fix it. The situation is further complicated by the fact that the laptop has never been saved, and there is no XP discs for me to reinstall from.

  Wipe the drive and starting over is not a huge loss, but I need instructions on how to do that, without being able to use the last good config or the factory restore to XP disks.

  I'm sure that this information is on the internet somewhere, but the search engines sent me on a wild goose chase and I really hope I can solve this problem myself. I've only worked with Vista and need guidance on this.

  If anyone knows what to do, Please HELP! Good karma coming your way!

  Thank you

  Sryan2930

  Usually, I get this error when you try to transfer a hard drive from one pc to another, or after replacing a motherboard. The problem is probably the chipset/mass storage drivers.
  I had limited success by starting in safe mode and (re) install the drivers downloaded from the manufacturer's website.
  Here is the link to help you: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3356622&taskId=135&prodTypeId=321957&prodSeriesId=3356620&lang=en&cc=us

  I hope I helped!
  Brian

• I can't open windows update in Safe Mode. Also blue screen at startup ('a forward driver a buffer based on the battery'

  My laptop keeps hitting a blue screen at startup ('a forward driver a buffer based on the stack'), I can only start it in safe mode. I want to try windows updates to see if this will help, but whenever I click on the button to update windows on the start menu, nothing happens. I tried searching for the program to see if I can open it another way, but can't find it. If I click on windows update and then nothing happened. I have windows vista home.

  original title: I can't open windows update

  Hey ElizabethSlater,

  Try to run a full scan with the Microsoft Safety Scanner to make sure that nothing is found.

  Try also to install the latest drivers from your computer manufacturer's website. If you have difficulty to locate the website of your computer manufacturer or the drivers on their page, please provide your computer brand and model in your next reply. If you have built your computer you need visit the site of the manufacturer of each piece of hardware to get the latest driver.

  Once the drivers have been installed, try to restart your computer, and then test to see if the same problem occurs.

  Hope that helps.

• (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen

  Original title: Blue error screen

  I bought a laptop Toshiba Satellite M840. When I took my laptop to work, when all of a sudden my laptop crashed? It came with (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen. The problem is still ongoing and happens at least once a day, and it seems to be crashing more often?

  I created minidumps.

  https://onedrive.live.com/redir?RESID=B4BF3E5538F50D20! 119 & authkey =! AOTgLWC39ykXKi4 & ithint = % 2cdmp

  Can someone help me solve this problem? Thanks in advance.

  There are two questions.

  1 - athw8x.sys (your wifi atheros driver)

  2 - Symantec.

  I would completely remove the atheros driver and remove Symantec and use the built in Defender

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Flash blue screen at startup

  Hi I just got my area51, and 1 thing I noticed that whenever I start it it has blue screen flash of 0.5 dry completely (no) - then bios - windows login - etc.

  I used my old monitor and it did not have this blue screen at startup thing so Im wondering if its normal.

  It is most likely part of the screen.
  Seems to me that the display in sync with the computer screen.

• blue screen every startup: error (0xc0000005, 0xF7c2815E, 0xf7C66864, 0xF7C66560) kdcom.dll - address F7C2815E base at F7c27000 Datestamp 4ed8a0bd

  ORIGINAL TITLE: help... Blue error screen?

  Help I get this blue screen error whenever I start up my dell computer... A problem has been detected and windows has shut down to prevent damage to your computer.  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: make sure that you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try which video cards.  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.  Technical information: (0xc0000005, 0xF7c2815E, 0xf7C66864, 0xF7C66560 kdcom.dll - address F7C2815E base at F7c27000 Datestamp 4ed8a0bd

  Thank you, I actually set myself a few hours after the announcement by starting in safe mode and scan with norton :) But thank you very much for the reply!

• Blue screen at startup - no code error and it does not open in safe mode

  Hello. I have a Sony VAIO (VGN-N130G) which is about 5 years old. I also have a blue screen error at startup. Unfortunately, there is not a code of error/message at all. I tried to start it in Mode safe mode, but it does not work... just blue screen. Is my bread cell phone?

  Hello
   
  
  Method 1.
  If you have a Widows XP installation CD, refer to the article below and check if this helps us start successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
  
  Method 2.
  If the steps above do not help to solve the question I would ask you to perform a repair of Windows XP installation. See the link below for the procedure.
  Perform a repair Installation
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.