"error on line 0 of the battery" when I go online on the homepage

Similar Questions

• DR IP customizer: error on line number '17': the number of columns specified is incorrect.

  Hello

  I work with MRS 4.1 and trying to customizations ip configuration for my virtual machines guests on the recovering site (approx. 100 guests).  I've updated the CSV (generated from the order of Dr. - ip - customizer.exe) with all the necessary network information.  But when I try and upload it to my site SRM recovery server, I get the following error:

  Error on line number '17': the number of columns specified is incorrect.

  Is the command I use to download: Dr. - ip - customizer.exe - cfg... create csv - c:\srmip.csv - cmd \config\vmware-Dr.xml

  I found that if I change the csv file so that it contains 16 lines or less it downloads very well.  I have not read on any limitation of the number of rows in the csv file might contain so I think that there is a configuration that causes this behavior, but I can't figure out what that/where it is.  Any help would be greatly appreciated.

  Thank you.

  Hello

  something is wrong with your file formatting. A look at the image as an attachment. From the server6 (line 17) do not have the lines "," (comma) at the end of the line (and so less columns):

  

  If I take your file and then open in Excel and save it without changing anything, all lines have ',' (comma).

  Probably something wrong with the way in which you save the files (Excel throws several warnings when you try to save the file in the csv format, you have to press 'Yes').

  Michael.

• Could not parse the file to start. Error on line 15. at the start of Transformation XSLT generator

  I am running PeopleTools 8.55 but when I try to run XSLT Transformation Builder I get error not able to analyze the startup file. Error on line 15...

  What is the problem?

  the solution is to edit the jnlp file locally:

  glance to the argument of the tag:

  http://myhost.net:8500/PSIGW/HttpListeningConnector? = GETXSLT operation &program = CUST_V1. PRINCIPAL. V2TOV1

  the problem is that this parameter is incorrect XML... due to the &, replace by the following text and you will not have the error:

  http://myhost.net:8500/PSIGW/HttpListeningConnector? = GETXSLT operation &program = CUST_V1. PRINCIPAL. V2TOV1

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• When I try to automate - fusion photo I get this error - which freezes my Mac and I have to force leave to use anything - 19 error: bad argument: invalid resource format. Error on line 0, the character offset 560, in ' {alignChildren: 'fill', text: ' $$$

  Error 19: Bad argument: invalid resource format. Error on line 0, the character offset 560, in ' {}

  alignChildren: 'fill', text: ' $$$ / AdobePlugin/Shared/Photomerge/process/Name = Photomerge', orientation: 'row', alignment: "fill."

  View1: Panel

  {

  "text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/layout = layout", direction: "column", alignment: ["fill", "fill"],

  View2: Group

  {

  orientation: "column", alignment: "fill."

  _LOauto: RadioButton {text: ' $$$ / AdobePlugin/shine/Photomerge/Scr/Auto = Auto ", alignment: 'left'"},

  view4: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Automatic_87x38.png"}

  },

  view5: Group

  {

  orientation: "column", alignment: "fill."

  _LOperspective: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/Perspective = Perspective', alignment: 'left'},

  Vision7: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Perspective_87x38.png"}

  },

  view8: Group

  {

  orientation: "column", alignment: "fill."

  _LOcylindrical: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/cylindrical cylindrical = ', alignment: 'left'},

  view10: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Cylindrical_87x38.png"}

  },

  view11: Group

  {

  orientation: "column", alignment: "fill."

  _LOspherical: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/spherical ball = ", alignment: 'left'"},

  view13: Image {image: ' /}

  Hi Donald,.

  Sorry for the inconvenience.

  This happens usually when the script does not have enough permissions to manage this.

  Please make sure that this folder applications, and two libraries have full read and write.

  Also if it happens again, please tell me if you use Bridge for example or directly with Photoshop.

  Thank you

  Jitendra

• Error "Invalid line" when you use the command tableFile - ttImportFromOracle

  Execution of the order and got an error, as shown below:

  c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt
  Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt'
  Use '-help' for more information
  
  

  table_list.txt looks to below, except I have 112 tables total in the list, a table by line, as indicated in the help documentation.

  mySchema.myTable

  mySchema.myTable1

  mySchema.myTable2

  I tried to make the file table_list.txt have only the table (without figure) names and the same error occurs.

  Invalid line is always the last table in the file. So if I take off the table she complains, she complains always just whatever the table is the last in the file.

  Can someone tell me what I am doing wrong?

  Thank you

  Matt

  To work around the error, I just used - tables instead.

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• Error at line 1: ORA-01503: creating the control file has no

  Hello
  
  I do disaster when I create controlfile by trace, I got an error
  
  CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
  MAXLOGFILES 16
  MAXLOGMEMBERS 2
  MAXDATAFILES 30
  MAXINSTANCES 1
  MAXLOGHISTORY 292
  LOGFILE
  GROUP 1 ' / test/opt/102/oradata/test/redo1.log' 100M, SIZE
  GROUP 2 ' / test/opt/102/oradata/test/redo2.log' 100M, SIZE
  GROUP 3 ' / test/opt/102/oradata/test/redo3.log' SIZE 100 m
  DATA FILE
  ' / test/opt/102/oradata/test/system.dbf',
  ' / test/opt/102/oradata/test/undotbs1.dbf',
  ' / test/opt/102/oradata/test/sysaux.dbf',
  ' / test/opt/102/oradata/test/users01.dbf'
  CHARACTER SET WE8ISO8859P1
  ;
  CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
  *
  ERROR on line 1:
  ORA-01503: CREATE CONTROLFILE failed
  ORA-01565: error in the identification of file ' / test/opt/102/oradata/test/system.dbf'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  
  I wrote something wrong?
  
  Thank you

  I understand, but I couldnot restoration l datafile by rman restore command coz base not at the stage of editing!

  Appear you are not using the rman backup catalog and controlfile to help register rman backup.
  in this case if you recreate the controlfile to way you will lose all your information backup of controlfile.
  better restore controlfile from piece of backup or AutoSave. as restore controlfile from ""

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• The command line is no longer present when I connect on Firefox. Have to go through the history and home to see. Can you help me?

  My command line is no longer present when I connect on Firefox. Only the most top line (Firefox, file, editing, etc.). The only way to get to my start page is by going into the history and press Home.

  This has happened

  Each time Firefox opened

  == When I upgraded to the latest version, I think

  * Make sure that you have the Navigation Toolbar and other toolbars visible:  View > Toolbars .
  * If items are missing then see if you can find them in the  View > Toolbars > Customize  window.
  * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
  * If you do not see that item then click the  Restore Default Set  button in the View > Toolbars > Customize window.
  

  See also back and front toolbar buttons or others are absent and controls, buttons and Toolbars Customize Firefox
  ---
  http://KB.mozillazine.org/Toolbar_customization

• Satellite L500-1UU - disconnect the battery when it is connected to the AC adapter / CC

  Hello world

  I have purshaced new Toshiba Satellite L500-1UU
  CPU: Intel (r) Core i3 CPU M330 2.13 GHz
  Physical memory: 4096MB RAM
  Microsoft Windows 7 Home Premium 6.1.7600

  My question is: remove the battery when I use my computer laptop while its connected to the AC adapter would be wise or not? This would increase or decrease the life of the battery, or it will not affect anything?

  Is i3 processors have a technique of centrino disconnect battery power whent, it is fully charged?

  What do you think of this?

  Hi Khaild Essam,

  I agree with Akuma. There is no problem, remove the battery when the AC/DC adapter is connected. If you can do it. In addition the battery charge will be stopped if it s at full charge. The laptop consumes energy to AC/DC adapter only.

  If you remove the battery and work with AC/DC adapter only, the battery life will be improved a little because it s not in its use.

  I found an interesting document for you:
  [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

• Satellite U series: Question about bypassing the battery when connected on AC

  Hi, I am a bit newbie to PC Toshiba laptop (series U) and I was wondering if my laptop has this feature where it bypasses the battery when it is fully charged and the power supply cable is connected?
  I see the battery blue led is on even when it is fully charged and the power is connected, it means that my computer is still using the battery?

  I'm running a lot and I will not waste my battery life.
  Thanks for any comments.

  Hello

  Congratulations on your new machine, I understand that worried you´re for your battery life. I was scared too, but a lot of people here in the forum told me that, in each new machine for many years (i.e. about 6 to 9 years) almost every laptop has an electronic charge that regulates the process of charge of the battery.

  Don t worry, if your battery is fully charged, the built-in charging circuit is a special State that is as "cool cool" to maintain your battery and to protect the battery.
  S better to keep the battery in the machine then removing it.

  Welcome them

• Can I remove battery when Tecra M-Series connects to the AC?

  Should I remove the battery when it is connected to an electrical outlet? What is the best practice?

  Thank you!

  Hello

  Don t you need to remove the battery, since the electronic load cuts the power to the battery when the load is done.
  The best practice is simply to use your computer as usual and Don t make reflections on electronics. They were built you don t have to think. :)

  Welcome them

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC