Error on the screen and blue ati2dvag.dll - Satellite A60-122

Similar Questions

• Error of indata page of the kernel and the screen goes blue

  Hello.

  For the 5th time in less than a week, the screen turns blue and "Kernel page indata error" appears (between a form of codes). Is could someone please tell me what could be wrong with my laptop?

  Thank you very much.

  Nick

  Hello

  1. What is the exact error message you are getting?

  2. when exactly you get the blue screen error?

  3. don't you make changes to the computer before the show?

  Please follow the steps mentioned in the links below.

  http://support.Microsoft.com/kb/958233

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7 (Also valid for Windows vista).

• Qosmio G30 - lines on the bottom of screen and blue

  Hello

  I m a lot of problem with this laptop...
  Having bought some time ago it s summer works well, but out of the blue it s given me...
  I switch on the laptop, and when the Qosmio logo picks up his all with lines inside and rather than the background is black it is blue... after that funny of characters begin to appear on the screen and the Windows Xp logo appears then a blur a blue screen comes up with an error it blinks fast if you can not read and the laptop restarts...

  I tried to reformat, but the same problem occurs. Help!

  see you soon

  You are using Windows XP?
  Fact the same question is displayed using the OS preinstalled Toshiba?

  Check this box!

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck

• Qosmio G20-117: bad pixels on the screen and the CD rom does not work

  Hello

  I have a problem with the computer hardware. I got a Qosmio G20-117 and you have a problem with the cdrom and the screen. Got bad pixels on the screen, and cdrom does not work. I live in the United Kingdom, so I tried signing up to them to choose the computer before the computer is out of warranty.

  Whenever I register, it says sorry, an unexpected error has occurred, please try again later. I have tried at least 20 times since yesterday and it doesn't seem to work. I have them even called and they told me, the service is stopped and will be fixed this morning but yet nothing works.

  Any solution?

  Hello

  If you want to contact Toshiba service partner in your country then why you don't call them?
  Toshiba page you will find the database with all service providers in the world.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  I don't think that you need to register something apart from the serial number of your laptop. But in my opinion this could also be done at the point of service.

• iPhone 6 dead to the screen and cannot be replaced

  my iPhone screen 6a stopped working after that it has been corrected for water damage. silent\vibration iPhone button working I tried to change the screen but it seems that the piece of hardware that connect the screen his works not showing me the white and blue lines.

  I'm sure that his works, but the screen does not.

  so is there anyway that I can control my iPhone on a Mac or BC? I tried to connect it to iTunes but it will take oped the access code. the access code can be opened in the computer?

  I need the data in it.

  Thank you

  and excuse my English

  Hello and welcome on the Apple forums.

  I'm sure that the connector of the LCD screen is broken. You need to replace the entire façade of the phone unfortunately.

  Control your phone, is impossible without your password.

  It can be flown in DFU or Recovery mode and do a restore in order to disable the pascode, but you lose anything stored in it.

  If photos, music, contacts, calendar, mail, messages, or stuff like that is what you want to get through iTunes, I highly recommend you to visit:

  http://icloud.com Log in and see all your data in there (if you had an iCloud ID associated with the phone and you have not disabled auto backup.)

  You can also use a projector app screen if it let's do you that.

  Google is your friend in this case.

• I start my computer, a white window appears in the middle of the screen and I can't remove it.

  Every day when I start my computer, what a white window pops up in the middle of the screen and I can't remove it.please can anyone help.

  Cannycarol

  Hello, Carolyn,

  Windows operating system?  Windows XP, Windows Vista, Windows 7?

  Are you capable to perform a scan for malware?  Download the tool from this link and run a full scan

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You are able to surf, read email, etc.?

  Is there a message "year Unknown Error Has Occurred."

  You are able to go into the event viewer and look for errors - the impossible event ID

  You may have to reinstall Windows

• An e-mail message is constantly on the screen and I can not remove or change.

  original title: E-mail

  an e-mail message is always on the screen and I can not remove or change

  Hello

  1. What mail client do you use?

  2. what happens when you try to delete the e-mail?

  3. you receive an error message when you try to delete the e-mail?

  4. where did you receive this email?

  You can try the following and see if it helps.

  Method 1

  You can try to delete the e-mail in a clean boot state, and check if the problem still persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfigand click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Check whether the problem is resolved.

  Method 2

  I suggest that you run an anti-virus from the link below.

  Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Hope this information helps.

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• The right edge is off the screen and I can't adjust the width.

  Somehow, I have the column on the right side of the screen and now it can not reach to reduce the column width, so I can see the part of the message.

  On the toolbar > Options (mouse hover on a menu appears, do not click on options) > Presentation > vertical display

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• Hospitality at Thunderbird takes up half of the screen, and I can't remove it.

  Since this review popped up, it takes the bottom of the screen, and I can't find a way to remove it. Sometimes when I open Thunderbird, greeting isn't here, but one of my regular e-mails takes up the bottom half of the screen instead. I want to return to a list of emails and read only those that I click on.

  Disable the message pane. F8 it will switch on and outside.

  FYI: whenever you want to change the display of the layout of your screen, look in the VIEW menu. All these options are there.

• Yahoo's page cannot be opened properly, the data are clustered on the left side of the screen and do not work

  When opening Firefox, browser my Yahoo homepage is loading properly. It opens but data on the Yahoo page are all the cloged on the left side of the screen and do not see the data nor the icons of work, and I can not access any information or sites, do not respond or work the yahoo page...

  It takes place before, but within hours or the next day, it opens correctly withouth do nothing, but now does not work since yesterday.

  I have window XP

  Hello ajdf9, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code.

  IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code to return. I hit Cancel on the stop screen or type my password the password screen and it goes back to the screen, I was on. I did a reset, all settings, but not him erase all content and settings. I went all day without any problems and an ago he started to panic. I took the cover of a few days ago thinking it might be the cause of the problem by pressing the power button, that wasn't the problem. Can someone give me some advice on what could be the problem?

  I have not updated my phone to the new IOS