error pdf service activation manager

Similar Questions

• I get this error message: Service Control Manager: The Genesys Logic USB Scanner controller NT 5.0 service failed to start due to the following error: the system cannot find the specified file.

  I get this error message (consistantly about every hour or so) and the computer crashes.  I suspect that it is looking for a file, but I can't find where the USP Scanner controller NT 5.0 would be installed.  Could it be part of the HP 6500 has Officet more pilots?  Thanks for any help!

  Hello John Wirkkala,.

  How long have you had this problem?  You still have the disk that came with your HP Officejet?  If this isn't the case, I've included the link below for the drivers and installation.  You have any other devices synchronize you with your computer via USB?

  If either reinstalling the device or updating the drivers is not a workaround, see the event viewer for the error log.  Please let us know status.

  Downloads of software & driver - HP Officejet 6500 a Plus

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=4083977#N295

  Event Viewer: how view and manage events records same observer in Windows XP
  http://support.Microsoft.com/kb/308427

• Error service Control Manager Event Id 7026

  Service Control Manager error - the next time you start Event Id 7026 or starting system (s) failed to load: __Lbd (I see this error message in the system event viewer when connecting). The full message of MS is below.

  Details

  Product: Windows Operating System

  ID: 7026

  Source: Service Control Manager

  Version: 5.2

  Symbolic name: EVENT_BOOT_SYSTEM_DRIVERS_FAILED

  Message: The next (s) starting or starting system could not load: %1

      

  Explanation

  The specified drivers not been loaded properly. The driver is not in the expected location.

       

  User action

  Do all the following:

  Verify that the drivers are properly configured.

  Check that the computer is running the latest version of the drivers.

  Unfortunately MS did not say how to do this, just to make - not all that useful. How can I solve this exactly?  Any help will be greatly appreciated.

  Hi Bantam,

  In Event Viewer, do you think the list of specific drivers as well as the error message?

  You can follow this link to update the drivers on your computer:

  How to manage devices in Windows XP?

  Hope the helps of information.

• After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

  After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

  Hi patsyf58769691,

  Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

  Kind regards
  Nicos

• When you try to add 'fédération Service Active Directory' in the VM, it fails with exception after clicking on the last step of the wizard.

  Log Event Viewer as below.

  *****************************************************************

  Event log:

  Log name: Microsoft-Windows-ServerManager/Operational
  Source: Microsoft-Windows-ServerManager
  Date: 07/03/2012 18:09:06
  Event ID: 1600
  Task category: no
  Level: error
  Keywords:
  User: HDC\Administrator
  Computer: Win2K8HDCRoot.HDC.Com
  Description:
  An error has occurred in the Server Manager. An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1600
      0
      2
      0
      0
      0 x 1000000000000000
     
      15
     
     
      Microsoft-Windows-ServerManager/Operational
      Win2K8HDCRoot.hDC.com
     
   
   
      http://schemas.Microsoft.com/win/2004/08/events"xmlns ="Event_NS">
        An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)
  
     
   
  

  *****************************************************************

  Details of home:

  Win 2K 8 R2 Enterprise
  Processor: Xeon x 3440
  Roles: Hyper-V, file Services
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  Virtual machines running: 6
  Total none of the network adapters: 2
  1 NETWORK card: (Intel (r) 82578DM Gigabit Network Connection is connected to service internet broadback. "Statis IP" is set for my server.
  Not virtual networks: 2
  Virtual Network 1 is "External" type and connected to the NIC1. The value settings IPv4/IPv6 IP addresses and DNS automatic.
  Virtual Network 2 is of the type 'internal '. IPv4/IPv6 settings is set to Auto for IP and DNS addresses.

  *****************************************************************

  Information on the virtual machine:

  Win 2K 8 R2 Standard
  Roles; "Domain service active Directory", "DNS Server", "File Services" and "Web Server (IIS).
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  None of the network adapters: 2
  Network adapter 1 connected to 'Internal' with IPv4 set to a static IP address '192.168.10.1 ' and DNS set to ' 127.0.0.1'. IPv6 is disabled
  Network 2 connected to 'External' and IPv4 adapter set to automatic for the IP and DNS addresses. IPv6 is disabled
  Domain controller for HDC.Com.

  *****************************************************************

  History of the virtual machine:

  Initially, she felt just VS2010 and SP2010 installed without DNS and AD DS roles added. Later, we VS and SP2010 has been uninstalled via the Control Panel, as well as other programs, I can't recall. Then added roles DNS and Active Directory domain to create and control the field x ".com". After a few days, another virtual computer has been configured in the same way and 'AD FS' role added to try app based on the claims. In the coming days, all of the roles above have been removed and added to create and control the current domain ' HDC. Com'. Before this step, the self-signed certificates that have been installed as part of the App claims have been removed from MMC, and IIS services. Don't forget to change the name of the computer as well.

  *****************************************************************
  I'm not good at bases of the any tried out above learning, but ask the members of the scholarly community to help me solve the problem and I'm sorry if I ask some silly questions as part of this thread.

  Hello

  Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
  TechNet Forums -http://social.technet.microsoft.com/Forums/en/categories/

• Error Code 0xC004F074 activation of KMS Clients Windows 7

  I get the error message above activation trying to activate Windows 7 Clients on my network.  My activation server is a Windows 2008 SP2 Standard host and I used a Windows 2008 Standard key to activate the KMS server.  I have at least 5 clients KMS in Windows 2008 that enabled very well out of it.  Vista systems return the error of insufficient activation account (which I hope enough not enough systems still have), but clients Windows 7 returns the error code above (that I wasn't expecting)

  It's the key to the Windows 2008 KMS server?  I need to change this to a key of Windows 7 (or Windows 2008 R2) before Windows 7 can start to activate off of it?

  Please see: an update is available that installs the Service of key management (KMS) 1.2 for Windows Server 2003 Service Pack 2 (SP2) and later versions of Windows Server 2003 Carey Frisch

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Lack of Service Control Manager executable (WinService.exe)

  I get the following error during startup by the Service Control Manager:

  ********************

  Windows could not start the SCM_Service service on the Local computer.

  Error 2: The system cannot find the specified file.

  ********************

  After checking the properties I realized that the real WinService.exe is missing. It should be in C:\Windows\SysWOW64\ directory but is not there. I searched the entire subdirectory of Windows, but there is nothing there.

  ********************

  Properties of SCM_Service

  Path to the executable file:

  C:\Windows\SysWOW64\WinService.exe

  ********************

  Could someone give me an idea how to restore this file please?

  If you cannot run the SFC, then you probably have more system files missing or corrupt than just WinService.exe - but we can't really say without CFS.  I fear that some type of resettlement is eventually inevitable.

  If your hard drive is showing corrupt sectors, we should make a complete diagnosis to ensure that it went wrong (or is about to go wrong).  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  Remember to do this last system repair/upgrade procedure, you need an Installation of Windows Vista genuine disc.  A manufacturer's recovery disk will not work (it only allow you to do a clean install, which is not to preserve your settings or your programs if you can first backup and preserve your data).  That's what we have to do if you can't get your hands on a genuine disc, but it is best if you don't have that you can borrow a disk from someone somehow.  I don't know that the warranty includes replacement of an Installation of Windows Vista genuine disc if you have been issued one in the first place (unless maybe you can prove yours is defective).

  Going back to September for a restoration of the system is probably a little too - especially since we are not some that will actually solve the problem (although he often works in this case - but I don't know that I would do so far back me).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Service Control Manager 'Mistakes' 7001 & 7023

  Separated from this thread.

  All of the above Services are set to automatic and started, but the problem persists. In the event viewer, I get the Service Control Manager 'Mistakes' 7001 & 7023 and cannot identify what is the cause. I have turned off Homegroup and reactivated it hoping that it was the culprit, but nothing helps. My biggest problem is to track down what exactly is the cause for me the answers in EV are vague. I've done clean boots run SFC/scannow nothing helps. I also do not show NetBIOS TCP or whatever it is in the plug-and-play hidden devices in Device Manager. I have Win7x64 Hm Prem on an HP pc custom.

  Jerry Merci for your reply. Fortunately I managed to solve this problem via another site of microsoft to a position that was several years thanks "RiverWay May4th 2013" (link) http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/function-discovery-resource-publication-0x80070005/3a149bbb-4ccd-4b2c-bd88-dd642a85575e?rtAction=1433718960031 as follows:

  He said: -.

  "I was able to move beyond this error by doing two things:

  (1) open a prompt with "run as administrator" command window and run the following:

  > net localgroup administrators localservice / add

  > net localgroup administrators service / add

  (2) delete all files in the C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking folder. Some files wouldn't be deleted because they are used. I've just left alone.

  I'm not sure if step 2) was really necessary. In any case, after that, I was able to start the service Function Discovery Resource Publication . I changed the start mode of the service to "Automatic (delayed)" as others suggested.

  Hope that helps ".

  It cleared up my event viewer errors, seems when I started tinkering with homegroup settings in SCM began pestilential havoc on other parameters and which started when I googled everywhere to try to find out why when I restart my desktop computer so slow to produce icons they start white and then slowly come back to life or generate slow down my pc. Leading also to run sfc/scannow which found corrupt files but was unable to solve some of them which led to SFCFix which sets and sfc/scannow which forced me to look at in the first place of event viewer. In any case its all good now.

• Message from Windows Code 43 for Intel(r) Active Management Technology - GROUND (COM5)

  Hello

  I use a Compaq HP 6200 Pro SFF PC with Windows 7Pro, SP 1.

  With this update of the weeks, I noticed that Windows tried to make the pilot also updates.

  When I first checked the Device Manager, it was (and still is) a yellow question mark on Intel(r) Active Management Technology - GROUND (COM) in the category, the Ports (COM & LPT).

  A few days earlier, I realized there is a problem and when I checked the Device Manager, it is the GROUND (COM 4). Which finally solved and disappeared some time after I disabled the driver under properties.

  Yesterday, it was the GROUND (COM 6), which I disabled it after seeing the message that "Windows has stopped this device because it has reported problems... »

  Who has disappeared and today is the GROUND (COM 5) with the same "Windows stopped of...» (Code 43). »

  I would try to understand/learn what is happening here. Can someone give me a simple explanation? Do I need to worry?

  The only points negative I noticed, was earlier in the week, I couldn't view some pages when surfing the web. I searched the site, microsoftstore.com and could not go beyond a few pages without falling on a white page with an error message.

  Also, when I logged on WindowsLive in settings, my Windows phone not had not been "situated" for more than a few days.

  Thank you very much for any information,

  mtnbeebalm

  Hello Mtnbeebalm,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any recent hardware or software on your computer changes?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Update the drivers for the chipset of your computer from this link and check.
  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5037916&swLangOid=8&swEnvOid=4059

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• DIM-00014: could not open the Windows NT Service Control Manager.

  Hello
  11 g R2, on Win 2008 I created the user oracle of the United Nations. It is in ora_dba and local Administrators group but cannot create oracle instance:

  C:\Users\oracle>oradim -edit -sid TEST -startmode auto -srvcstart system
  DIM-00077: Failed to change service configuration.
  O/S-Error: (OS 5) Access is denied.
  
  C:\Users\oracle>oradim -new -sid TEST -startmode auto -srvcstart system
  DIM-00014: Cannot open the Windows NT Service Control Manager.
  O/S-Error: (OS 5) Access is denied.
  
  C:\Users\oracle>oradim -new -sid TEST -startmode auto
  DIM-00014: Cannot open the Windows NT Service Control Manager.
  O/S-Error: (OS 5) Access is denied.

  Thanks for the help.

  Start the command with administrator privileges prompt

• MacBook: An error occurred during activation. Try again

  HI, I use MBP and this problem has been persistent for more than 5 months now.

  I'm on El Capitan version 10.11.6. I get the message "an error occurred during activation, try again" when I try to Sign In.

  My Internet speed is ok, ok account password. Already connected to iCloud and App Store with the same password. IMessage + Facetime, I am not able to connect.

  Help, please. Thank you

  Using two-step verification or two-factor authentication?  If so, you need passwords for specific app for FaceTime and Messages.

  Passwords using specific app - Apple Support

  If this is not the case, see this article.  It is written for iOS, but if you translate the suggestions in other similar to OS X, it should solve your problem.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Thunderbird activity Manager reports several times the gmail trash Emptied over and over every few seconds. Solved by trash Compact/repair

  First of all, thank you for an amazing product! Life-changer.

  Thunderbird Activity Manager reports repeatedly trash emptied over and over every few seconds. The account he reports that empty the trash has no trash. I have repaired the trash folder, repaired the Inbox folder, compacted the account, does not. I've left Thunderbird worked during 10 hours see if it was a natural process, but the continuous emptied trash messages. The mail folder, I am using for this account occupies approximately 7 GB. Thank you! Mike

  Ignore my suggestion on unsubscribe to solve the problem of trash - you already solved.

• How can I enable disable Activity Manager?

  How can I enable disable Activity Manager?

  General information:
  The activity Manager records all interactions between Thunderbird and your e-mail in one place provider. There is no guesswork more. Just look in one place to see what's going on with your email.
  Activity Manager allows you to follow more closely what is happening in the system and what activities are currently performed (for example, synchronization of folders offline IMAP, download new POP messages). The info in the status bar may appear and disappear quickly sometimes before able to read, but the info is displayed in the Manager activity.

  Useful in the audit of what has occurred and are auto stocks. This can help in the troubleshooting section.

  It appears if you select 'Tools' > 'the activity Manager.
  Thus, it is not something that suddenly arises every two minutes to annoy the user.
  The journal is deleted whenever you leave Thunderbird or you can clear the log manually.
  "Tools" > "activity Manager".
  Click on the button 'clear list '.

  This is an unusual request to stop the activity of logging as a background process and the only way to check what activity account has or has not occurred.

  I have searched and checked preferences to see if it could be turned off, but nothing helped.

• Unable to sign in imessage: an error occurred during activation. Try again.

  Greetings,

  I just got my board battery and logic changed on the apple store, and since I can not sign in imessage. I get the following error: an error occurred during activation. Try again. I tried to reset the NVRAM, but I still get the error. My internet connection is fine, my e-mail works.

  Thank you for your help.

  Hello

  Open the purpose of this Mac from the Menu of the Apple icon top left point.

  Tab preview is to display the serial number.

  If this is not iMessages will not work (resetting the app just does not this account)

  Return to the repairer and put back it on the logic board (this is supposed to be part of the process)

  If you check it matches what is on your Mac (back, down, or battery compartment)

  If it is 'false' then get his change.

  There is a chance that this has also blocked using Apple ID for iMessages by this computer on the iMessages servers.

  The serial number is used to provide a specific connection of the device.

  IF this does not work after correction or get the serial number to the logic board, you will need to contact the Apple Support (same as Apple Care).

  Once you have explained that it is a matter of Apple ID, he should be free to Fix.  This does not mean that the person of level 1, you talk to knows what to do (they lead script for Apple care issues)

  Ask politely to speak to someone more important.

  Even in this case they may insist on collecting data and hoop jump.

  Based on others who responded that it now gets the engineers involved (the question happens separately the question of the logic board)

  Insist that the server is given regarding the use of your Apple Mac.

  Update or upgrade does not work and neither did a reinstall.

  Even in this case, they can tell you that it could take days for a resetting to filter through.

  

  20:43 Friday. June 10, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)