Error reading disc Y560d

Similar Questions

• Satellite L300 - error reading disc so I can't start Vista

  Please can you help me?

  Have a Toshiba Satellite L300. All I get is disc read error has occurred, please press Ctrl Alt + Delete.
  How can I get to start again. I have no idea what it takes then just keep pressing Ctrl Alt + Delete and it says a disk read error has occurred.

  I'm going along in circles in. Running Windows Vista Premium.

  Hello!

  You can access the advanced boot menu if you press F8 after starting the laptop? Then you can start to the recovery Toshiba HDD option (select Repair my computer).

  If you can access the advanced boot menu, you must reinstall Windows Vista from the t. Therefore, you can use the Toshiba Recovery disk if you start from it.

  Good bye

• Error reading disc after reinstalling xp

  I've seen similar positions but with no solution to this. Hope you can help. I updated my laptop drive and installed XP using the recovery disk. Formatted in NTFS ok. The installation was flawless. After restarting, I got a message "disc error". Reboot gives the same message. Thinking that I had a disk problem I used the soft Western Digital drive to check the drive and it is 100% OK. I used the low soft format the disk (write all zeros on the disk) and then again checked with the WD application. All tested OK. Then I used the XP Reinstall disk to format to ntfs and reinstall the operating system. I had the same installation without flaw and the same error at the end I repeated 2 times more tempting to quick format, slow format, etc but still the same error. The disc reads perfectly with a number of different applications until I have reinstall the OS. The laptop works very well with the old drive.

  Format.exe said it almost nothing about the condition of the disk. Chkdsk.exe /R tells you much more and diagnostic program by the disk manufacturer (which you can download) tells you more.

• Error reading disc after HD upgrade

  I am trying to upgrade the hard drive on my laptop T60 and get the message "a disk read error has occurred. Press Ctrl + Alt + Delete to restart. "I'm grateful for any help that anyone can give.

  The old hard drive is a Hitachi 60 GB HTS541060G9SA00 model. The new hard drive is a Samsung 500 GB HN-M500MBB model. I used Acronis True Image to create an image of the partitions on the old hard drive, following the procedure and the guidelines that I found here:

  http://www.wilderssecurity.com/ShowPost.php?p=1299861&postcount=9
  http://www.wilderssecurity.com/showthread.php?t=203480

  To recall a few aspects of the process: I had the * new * hard drive in the machine; I started on the Acronis CD; I have restored/resized the image stored on a hard disk USB hard disk nine. When I boot the disk hard nine, I get the message "disc error".

  What I tried:
  * I started to UBCD. On this basis, can I open 'My Computer' and see the partitions on the new drive, and I can see the files and folders it contains. The c: partition is NTFS, MB 64428 with 43501 MB of free space; the D: partition is NTFS, MB 418765 with 393804 MB of free space. I guess that means that the hard drive itself is not defective.
  * I tried to change a BIOS setting: the "Serial ATA (SATA) ' definition '[compatibility]' and start (got the disc read error) and then on '[ACHI]' and startup (once again, the disc read error). This is beyond my knowledge, but I read on a forum somewhere that this setting failover helped someone with a somewhat similar problem.

  Any suggestions? I'm grateful for any help you can give. Thank you!

  I didn't realize that the two forums were related or frequented by the same community or I have not posted in both places. I was able to come to a solution, the details here:

  Forum.ThinkPads.com/viewtopic.php?f=29&t=102535

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• Error reading the RAR and Cab files to Samsung HD103SI 1 TB

  Recently, I installed Win7 - 64 bit on a new Samsung HD103SI HD. However, I had the following problems:

  1 unpacking everything .rar or cab file generates an arbitrary "Volume is corrupt error". I downloaded the same file several times and repaired with WinRar, but the error persists.

  2 try to install any application or software (installation files run from the HARD drive or from a USB external), translated by Error1335 (cannot read disc source or other generic copy errors).

  3. I tried lowering the maximum memory of advanced boot, as well as the msiexec commands in the BACK, with no result. I also run Windows (for RAM) memory diagnostic in DOS mode, and did a full scan of all partitions of the HDD in Dos Mode (command/r). No problem not found in both cases. Also tried disabling firewall ESET and Windows, but mistakes always pop up.

  4. what actually WORKS is when I try to run the same files (which gave errors in the file corrupt) in safe mode. It installs (or decompress) without complaint.

  However, I can't keep coming back in safe mode whenever I need to unpack / install something on my HARD drive.  Is it a driver problem or something else in conflict?

  Thank you.

  Hello

  Since it runs from USB key then is sounds like a hard drive or a hard drive problem-
  Check wiring (do not exclude what I saw wiring cause similar corruption
  Questions). Run the diagnostic test of the constructor which is much more intense than chkdsk.

  Would be a good idea to inquire about possible alternative drivers of Samsung Support and
  other options you may have. Especially if the disc is defective.

  Samsung - Support - click on the link "Computing."
  http://www.Samsung.com/us/support/main/supportMain.do

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Qosmio DX1210 - ODD does not read discs

  Hello, I was asked to help fix a friends computer its an
  Toshiba DX1210 all-in-one desktop.

  its about 1 years with no problems until today the hard drive has suddenly stopped reading discs completely it custom similarly recognize that there is a disc inside.

  I know there is a possibility that the laser is broken, but I want to eliminate everything before I propose to replace the ODD.

  ODD:
  HL-DT-ST BD - RE BT11F

  I have looked everywhere for an answer and did everything I learned to do in the past, but nothing has worked.

  I used restore points.
  Uninstalled the driver then rebooted to reinstall it (installation is a breeze and everything works).
  Reformatted your entire computer (created a backup and restored everything after that she did not).

  I'm stuck on this 100% and really want anyone who might have the answer for me or even to suggest something that would be a great help.

  With regards to your friendly IT Junkie

  MSG to the moderators if this is the wrong thread for this, please direct me to the right pair

  Hello

  Have you tried to clean the laser lens?
  Do this by using a fluid tip and alcohol of wadding.
  Be very careful and don't use force

  I had problems reading some discs and cleaning the laser lens has solved most of my problems with CD/DVD player.

• Satellite A30: Canoe start Recovery CD - cannot read disc information

  My a30 is about six years old.
  About two years ago, I used the recovery disks to format and reinstall windows xp
  I'm trying to do the same thing again now, but a window appears saying "can't read disc information.
  What could have happened to cause the a30 not to recnognise the disc? (he continues to recognize other discs)
  hope someone can help me
  Carl

  Wait. window saying "can't read disc information! ???
  How have you tried to use the recovery CD? Have you tried to start the recovery of the Windows operating system?

  Sorry, but something like this is not possible! You have to BOOT UP from the recovery CD to install the new OS!
  But beware, the recovery will format and remove the data from the HARD disk.

• Satellite Pro A10 - CD/DVD drive has stopped reading discs

  Hello

  I have an old A10 Pro Satellite which has a DVD rom stopped reading discs.
  He goes through the motions but does not display anything.
  I am attaching a new external DVD RW via USB, and it has the same problem.

  Anyone have any ideas?

  Concerning
  The

  Hello

  you mean that the external hard drive does not work too? Some software blocking your disks?

  I think that the best way to check if your internal drive still works would try to start with a bootable CD (perhaps with a live linux distribution on it) and to try this with the external hard drive also.

  If you're really a software that prevents the drive work properly, then you should recover your machine with the recovery media to make the drive work again properly.

  See you soon

• Satellite Pro A10: DVD rom sd c2612 stopped reading discs completely

  OK, I have a Satellite Pro A10, recently it is just stopped reading discs completely! Ive got no idea what wrong with and do not know if you need to replace? I prefer not too.

  If anyone has any advice on repairing it I would appreciate it. If not if anyone knows if there any compatible DVD readers writing? also the best place to buy?

  Help, please!

  Hello

  This does not sound well :( I think it could be a hardware problem maybe something wrong with the lens of the drive
  Anyway, usually it of not possible to fix these issues or it s not worth repairing, because the costs are too high
  Thus, it seems that you need to replace. But be careful. Not all readers are compatible because different master/slave/c-salt settings.
  I would recommend so contact the ASP in your country to get a compatible drive.

  But please try this proposal;
  Sometimes, the Player cannot read the Middle due to the incorrect registry key.
  Remove the upper and lower filter filter in this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the laptop. Maybe it helps

  Good luck

• I can't install my game START OF DARKNESS BLADE, coz every time I try it repeat, error 1305. Error reading file!

  I have a START BLADE OF DARKNESS game, whenever I try to install an error message appears saying: Error 1305. Error reading the file.

  I don't have a clue guys! Any suggestions would be greatly appreciated.

  Thank you...

  Micky.b

  [Moved from comments]

  Hey Micky,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what version of the Windows operating system you have installed on your computer?

  (2) how you try to install the game? What is a disk installation or a set of file?

  If you try to install the game on Windows 7 or Windows 8 so I would like to inform you that there are few games that are not compatible with these operating systems. You should check from the link below. However if it shows that the game is not compatible then you can install the game in compatibility mode.

  Compatibility Center

   

  http://www.Microsoft.com/en-in/Windows/compatibility/WIN8/CompatCenter/home?language=en-us '

  You can follow the links given below to install the game in compatibility mode.

  For Windows Vista: Make older programs run in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  For Windows 7: make older programs run in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  For Windows 8: make the programs more compatible with this version of Windows

   

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  If you still experience the issue I suggest you to contact forum support Severance Blade Of Darkness.

  Feel free to write us if you have any further questions. We will be happy to help you.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Server internal error - read the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I get the following error message when you try to access one of my hotmail accounts:

  Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.

  What is this error and how to fix it?

  Thanks Ellie

  I get the same message... must be a problem with hotmail.

• How to restore the documents now say "error reading file"?

  I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.

  Help!

  Hello

  1. what documents do you speak?

  2. were you able to view these files before?

  3. don't you make recent changes?

  I suggest you try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  It will be useful.

• Unknown Publisher box opens, I click run, it starts and then stops, saying "error reading setup initialization file".

  Windows doesn't let me download an application from my library to the city.  It is an application used to download their books. I have Vista Home Premium on my HP Pavilion.

  I start the download, the process begins, and then a small dialog box opens saying "Unknown Publisher" and the choice of 'run' or 'Cancel '.  I chose 'run', it seems it will continue then a little screen pops up saying "error reading setup initialization file."  I "ve never had no problem download at this point.

  For the same problem, I tried the following and still no luck:

  I've got "pop-up blocker" turned off.
  I disabled the "Inprivate filtering",
  I turned off my "firewall" temprarily

  Any other suggestions for this problem?
  Thanks for your help!
  Winifred_M

  Hi Winifred_M,

  Thanks for posting on the Forum of answers.

  If you can provide a link to the application, we can try to recreate the issue.
  Otherwise, it is perhaps a question that you should take with the Publisher of the software.

  However, you can try to use the Windows Installer CleanUp utility:

  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Do not worry. Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Download the Windows Installer CleanUp utility

  We have updated Windows Installer CleanUp Utility. This version of the Windows Installer CleanUp utility works correctly in all versions, 32-bit and 64-bit Microsoft Windows. If you have an earlier version installed on your computer, we recommend that you download and install this latest version.

  You must be logged on to Windows with a user account is an administrator on the computer to run Windows Installer CleanUp Utility. For more information about how to install and run Windows Installer CleanUp Utility, see the section "more information".

  You can download Windows Install CleanUp Utility starting from Microsoft Download Center:

  Download the Windows Installer Cleanup Utility package now.
  (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)

  Copied from http://support.microsoft.com/kb/290301

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.