Error restoring my Equium P300-16 t

Similar Questions

• Equium P300-16 t winlogon.exe error - badimage

  Hello

  I encounter an error that my Equium P300-16 t starts to windows Vista.

  This is what happens...

  Winlogon.exe - BadImage
  C:\windows\system32\KBDUK. DLL is not designed to run on windows or it contains an error. Try to reinstall with original media or contacting... blah blah blah.

  It began to appear after I tried to uninstall my Norton antivirus has expired. And it seems that the result of this error is that I can not connect detect wireless networks. so no internet! the age of darkness here I come.

  I don't know who this KBDUK file is so I am worried to take it off.
  I tried to restore to before I made changes but its made no difference - I broke it.

  Any help would be much appreciated.

  Thank you

  Dave

  Hello

  Maybe this KBDUK. DLL file is a virus or has something to do with your old Nero

  If you Norton from your system you must also run the Norton removal tool that you can download from the homepage of Symantec. It removes all the files of Norton products.
  Check this box!

  If it doesn t work I would try a system restore to an earlier point. After that you can try to delete Norton again.

• Equium P300-16 t - system error writing Configuration data

  Salvation message for the first time

  I have a Toshiba Equium P300-16 t and it has developed an error starting on the screen, it says

  System error writing Configuration data
  F1 - F2 CV - Bios settings

  When it appears that I can't get the option of recovery for work the bios settings seem to be completely in-accessible.

  This error appears just under the version number of the bios and the specifications of the RAM, just after the toshiba screen. The laptop is also a beep which I think is its length bios error code just two beeps very loud and even with a very short break inbetween

  On the page that appears after F1 (curriculum vitae) is pressed it shows just an another two options that are
  F2 - Setup F12 Multiboot Menu selection

  None of these options no matter what and the system is just idle on this screen.

  Obviously, without the bios menu there is not much I can do

  Really research help solve this problem as im not very clued up on the configurations of the system

  Oh and incase it allows... BIOS version - PhoenixBIOS 4.0 release 6.1

  Thanks in advance
  Kris

  Hi mate

  It would be interesting to know if the HARD drive is listed in the BIOS.
  Could you if you please check this?
  In the BIOS, you should see the HARD drive and HARD drive details
  If it is not visible, then that would mean that the HARD drive is faulty and therefore the operating system cannot be started.

  In this case, the HARD disk needs to be changed.

• Equium P300-16 t - error Code 0 x 490

  I have a laptop Equium P300-16 t.

  I had an attached external hard drive, 5 minutes later computer started making a loud noise and froze, it off using the top off button.
  Turned he went back on start-up repair mode ran it for about 30 minutes then indicated it could not be repaired system manufacturer or contact admin (us).

  Research on the Startup Repair diagnosis page that everything seemed to be spent out of the last thing here is what he said Word for Word

  No os found on disk file
  Code Repair: failed. Error = 0 x 490
  time taken = 14726ms

  I can't go to the login page it stops in this starting point upward.

  Help.

  Hello

  Resemble something happened with the operating system on the HARD drive.
  Eventually, the HARD disk or partition on the HARD disk is damaged.

  You are able to install the OS once more?

  Can you see the HARD drive in the BIOS?

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.

• Equium P300-16 t with Synaptics touchpad. Stuck left button?

  Hi all

  I have an Equium P300-16 t with a Synaptics touchpad.
  A few months back I had the following problem. As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point. I've updated the drivers, tried a system restore, checked under the button of touchpad for obstruction etc and nothing has changed.
  I made a completely new reinstall of Windows... still the same problem. Suspected a defective touchpad, so I contacted Topaz for a replacement touchpad mounted that and still the same problem.

  so... after having eliminated defective drivers/software/hardware, I'm out of ideas. Is there anything else I can check?

  Works very well with a USB mouse.

  Thank you

  James

  > As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point

  I think you should check the settings.
  In Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  Here, you should be able to get all the parameters of the touchpad.
  In my case, I found interesting feature in the speed of the pointer and typing parameters.

  There is a charming area of tape, and if you enable registration you could get access to other environments of tapping.
  The option is called DragLock in my case that his automatic release and auto release delay value is set on the court.
  Recommend you check this!

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Equium P300-P6T - where to get a Toshiba Recovery disk?

  Crash fatal hard drive in the RECOVERY PARTITION! Bought antiques and did not have the recovery disks.

  Can someone point me in the right direction for discs to buy/acquire/download recovery Equium P300-P6T?

  Hey,.

  Nice to hear that you got second hand Satellite P300 and welcome in the forum!

  Back to your problem:
  You can order online a Toshiba Recovery disk. It s not free but it of the best way to restore the factory with Windows, and all drivers/Tools settings. Everything will work because you get pre-tested this installation.

  You can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Re: Equium P300-P6T - double boot, need to reinstall but can't access the recovery

  Hello

  Have a friend s EQUIUM P300-P6T wishing me fix but recovery issues.

  It currently has windows 7 installed on separate partitions WXP can choose which operating system to start when loading. The factory for the laptop is Vista but it has replaced the one with 7.
  However, some of the Vista Boot files are damaged and cannot be mounted by Windows Recovery then resembles a new Vista installation is necessary.

  This should not seem like a problem but:

  (a) I tried holding 0 down as I turn to access the recovery partition (which still exists I see it within the management of the computer if I load xp) but it doesn't do anything, so I can't recover from the recovery partition.
  (b) I tried to reinstall Vista on this partition by using a disk of vista OEM however, when it happens at the stage of "complete installation" the progress bar stays in the same place forever about 3/4 of the way through as if it crashed.
  (c) I managed to get an installation of windows 7 on it, but when I charged it, it does not recognize the keyboard or a touchpad (even if not a problem with the drivers for each), and yet the cursor can be moved with a USB mouse is connected. In addition, the boot partition has now given a choice of "xp", vista, the older installations of windows

  I now put the computer to the original state, it was at the moment. However, the road I want to go down is to use the recovery partition to restore the factory settings on this particular partition and Vista.

  Does anyone have ideas how I can do this, or what is my best solution? As I said, now pressed 0 while starting has no effect yet the recovery partition is still existing on the hard drive.
  Unfortunately there is no recovery media that I have access to.

  Thank you

  Hello

  The whole story is very interesting and I wish I could help somehow. Your ad is quite long with very useful information, but, if I understand you correctly, you want to just install Vista original recovery image. Can you confirm this?
  If you have any other questions please ask one by one, and then we can answer one by one.

  Anyway, if your answer is YES here is my explanation:
  Saved on the HARD drive recovery image can be used with the factory only settings. With other words: when the original recovery image is installed, you will have full access to this recovery image. In the case where some other OS is installed (Win7 or WXP) this original condition will be overwritten and you will lose this recovery option (HARD drive recovery facility). Only way it have factory settings again is to use the recovery DVD disc. If your friend didn't create this disc (without taking into account the recommendation of Toshiba s) that you have big problem now.

  Please tell us once more what are your options now. What do you do now?

• Equium P300 is IRQL_NOT_LESS_OR_EQUAL message

  Please help, I have an Equium P300-16 t, now I went to turn on the laptop & was facing a blue screen goes all in curls just restart & end up with blue screens even when you click on repair windows you get a choice of repair windows or start windows normally, essentially portable custom in windows (but goes into safe mode) retains a loop , will start etc. Gets a blue screen, with the words, the IRQL_NOT_LESS_OR_EQUAL & the following error codes.
  0x0000000A (0 x 0, 00000002 00000001, 0x0000004C, 0x81E0EEDE)

  0x0000000A (0 x 0, 00000002 00000001, 0x0000004C, 0x821C1EDE)

  now when I run chkdsk I to force a disassembly of the drive, and then run chkdsk /r /f which I believe are the same, now, once it has verified, there now seems to be 4 KB in bad sectors, but there is also a message to the bottom say failure to transfer the messages saved in the event log?

  Now back to the bad areas, normally chkdsk normally will be able to recover? now, my other 2 options are a cover of h/d, such that there is an option by pressing F8 or format, but the laptop came without disks so I have to use my purchased copy & just put in the code (is it allowed) but of coarse I would rather not do the last two & not as a last resort them I ran the test memory with the Vista recovery console, but came back with nothing, so I'm a bit stuck now.

  So I was wondering if anyone has ideas or suggestions... Thank you...
  Abbi

  At the moment it is not easy to tell if it s a hardware or driver problem
  In your case, I would try to save all the files that you need a reinstall of Windows using the Toshiba Recovery disk or you use the HARD disk recovery. Go to the advanced boot menu, choose repair my computer and select the recovery Toshiba HDD feature. Follow the instructions on the screen.

  If you get the BSOD, yet once you start to test the RAM and HARD drive. For the HARD disk, you can use the Drive Fitness Test and for the Memtest86 RAM. My experience with the test the RAM of Windows isn't very good, so I prefer Memtest86.

  Good luck!

• Equium P300-190 - Question about upgrading the processor

  Hello

  I just have a question for my CPU PC Toshiba laptop, I have a can of Equium P300-190 full to give model number if necessary the cpu is one supplied with the laptop.

  My question is I want to upgrade the processor but do not know which would be the best option and there are limits with the BIOS, etc. on board.

  Any help would be greatly appreciated.

  Probably it is not known to you that upgrading the CPU is not officially supported by the manufacturers of portable.

  The CPU upgrade is a tricky thing... the fact is that the CPU must be supported by chipset and BIOS.
  Where a party would not support the new processor, the unit will not light.

  So even if you use a CPU that is supported by the chipset (Intel GM965) there is a risk that the BIOS could not support the new processor...

  The laptop was equipped with processor Intel Pentium Dual-Core processor T2390 (Merom code name) probably the other CPU Intel Pentium Dual-Core family-owned would be compatible, but to be honest, you won't see a performance improvement...

  So in my opinion it is not worth trying to upgrade the processor...

  In my opinion, you need to replace the HARD drive with an SSD... in that case you will get the performance improvement...

• Equium P300-16 t - very dark screen

  Hello

  I have a Toshiba Equium P300-16 t, but the LCD is very low
  I see about the office, works fine on an external display.

  I tested the LCD on another laptop and works OK,
  I also replaced the inverter and flex cable but still no luck

  The GPU would have gone?

  > I see about the office, works fine on an external display.
  To me, it's proof that GPU must be OK.
  When you start your laptop is the faint display even when you see Toshiba welcome screen or enter the BIOS settings?

• Equium P300-19O does not start

  Hi all

  I have an Equium P300-19O, which I have had the problem. Now the pc doesn't even start not at all. When I turn it on, there is not even a power light and it doesn't do anything.
  Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?

  Best regards

  Taro

  > Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?
  You must understand the hat on this virtual path that nobody of can say for sure what is wrong there and we can only speculate on the potential problem.
  Who knows what's wrong there. Maybe there is a problem with electronic control gear.

  Unplug the power plug, remove the battery and leave it for a while. Try to start the laptop with AC power only.
  When you connect the AC power supply is LED on indicator system turned on?
  Is there a reaction when you press the power button / stop?

• Equium P300-16 t - no power

  Hello...

  Not sure if anyone can help me out here?

  I have a Toshiba Equium P300-16t

  Initially when turned on, lights, dvd starts, 2 low beeps (which seems to do it on all laptops) then the screen turns on but would not go further?

  I left the power cable with the laptop off the battery when the battery is charged, press the power button, the button light, 2 seconds, goes off... Nothing else happens?

  Anyone know what may be the problem?
  Or if I can do something to make it work again.

  While the laptop seems to be starting, (lighting of the screen to the top) I tried a new screen, the same result, the new ram and hard disk, always the same result...

  Now without apparent reason, as I said, since the loaded battery, laptop don't even start? (I tried different batteries and without battery but still nothing?)

  Thank you very much in advance for any help anyone can offer.

  Kind regards.

  Deevie

  Hello

  I put t think the battery is the problem.
  If the AC adapter is plugged in the laptop must lights without the connected battery. You have tested the new RAM and the problem persists?
  Well, in this case, the motherboard may be defective or other part as CPU.

  It seems that the laptop can not pass the POST (power on self test) and in this case primarily the motherboard is default.

• May not wake my Equium P300 from sleep mode

  My * Equium P300-16 t * not waking up from sleep mode.

  If I use Fn F3 I get the message enter sleep and from what I read by pressing the power button wake the machine upwards, but not in my case.

  I also tried the Power Options to automatically mode after a specific period, but once again I can't wake the machine and do a hard reboot.

  My OS is Vista Home Basic.

  Anyone offers advice on how to fix this please?

  Thank you

  > but again I can't wake the machine and do a hard reboot.

  Your BIOS is up to date?
  Otherwise, update the BIOS

  Also in my experience sleep mode issues could be caused by corrupted system, so new facility could help solve this problem too.