Error starting 'diskette drive 0 seek failure '.

Similar Questions

• Diskette drive 0 seek failure screen black/continue F1, F2 Setup, CORRECTION steps

  Have followed the instructions for the BIOS, floppy drive disabled

  Has not solved the question-are there - it something else?

  That's what I discovered, trying to follow the instructions of several positions of countless times and several Tech IT these past two weeks.  This FIX is actually three steps; Two steps in blue SCREEN, the second of two parts missing in the instructions in the previous post Forum fixes:

  STEP 1. Select "F2" on your SCREEN black Error Message 'diskette drive 0 seek failure;

       Missing the 2nd step indicating where 'Floppy' must be DISABLED... is actually in two places.

  STEP 2.  Arrow down and SELCET «CMOS...» "near the top of the list - (the keyboard is not active) and on the next screen, arrow down and SELECT -" Floppy Drive-1, 44 is activated "MUST be EXCHANGE FOR: 'DISABLED' (the readers of floppy-1, 44 are obsolete) another menu screen will pop up, to make your selection, the arrow down to select"OFF"and the ECONOMY-F10.

  STEP 3  Submenu will return to the MAIN - BLUE SCREEN Menu, you need to arrow down and select BIOS; as stated in previous POSTS and need RESET BIOS to: #1 HD, CD/DVD #2; #3 unable to READ floppies; then select F10 to run, return to the main Menu of previous blue screen; "F10,"saves and exits" you in the main Menu of Blue SCREEN" toCOMPLETE FIX... Windows Start Up, immediately, translates the computer starts normally and returns to theWindows Logo and connection status. 

  • (See this correction, corrected an error in the boot order in the BIOS since the 'HD' has been 'DISABLED', floppy drive was 2nd "Enabled" and CD/DVD has been 1st disk "Enabled"; and CMOS had "activated" "Floppy drive-1, 44" that has generated this ERROR BLACK SCREEN and interrupt thenormal Windows process at startup computer n and connection. "")

  If all goes well, the MESSAGE is useful, easier, and more clear instructions to resolve for the next person with this problem and will be more quickly find and get back to business with a happy computer!

• diskette drive 0 seek failure. If I hit f1 continue, then every thing works normally. Looks like it's looking for an active drive that does not exist

  diskette drive 0 seek failure. If I hit f1 continue, then every thing works normally. Looks like it's looking for an active drive that does not exist

  This message comes to the BIOS screen that appears before Windows starts?  If so, go to the BIOS Setup and disable the floppy drive.

• Diskette drive 0 seek failure

  Windows XP Pro is installed. Its a Dell Dimension 8400 series. Question is diskette drive 0 seek failure is. The disk has been disabled. Now stuck in a loop, to select one of the options to start... Windows starts normally, safe mode, last known good configuration, etc.

  What other options do I have? THX

  Hi rubenrjr77,

  1. Did you the latest changes on the computer?
  2. You are able to access all the boot options?

  This would normally occur due to faulty or badly inserted diskette, incorrect settings in the system of entry/sortient system (BIOS), the diskette/tape drive interface cable, or lose the power cable.

  I suggest that you check in the system basic input/output system (BIOS), if all the settings are correct, for more information you can contact the manufacturer of the computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Diskette drive 0 seek failure... then

  I have a problem and I would really appreciate if someone could help me understand how is it possible to restore my computer back to normal. The computer won't Windows more. When I start the computer it says "diskette drive 0 seek failure" and underneath it says f1 to continue f2 to enter setup when I hit f1 screen says:

  Option AHCI ROM Bios revision: 01.03.50 Date: 26/04/2007

  Copyright (c) 2006-2008 Phoenix Technologies, LTD

  AHCI BIOS not installed!

  The initialization of the Intel Boot Agent GE v1.2.50

  PXE 2.1 Build 086 (Wfm 2.0)

  When I hit F2 this page flashes for one second the a blue bar is at the bottom of the page. When one is in none of the keys seem to do anything... I'm not very familiar with this kind of thing and could really use this tips

  Please take I don't know anything in the explanations, I'm pretty new in the field

  It would seem that you have a hardware problem.

  If under warranty, contact the manufacturer of the computer.

  If it's not under warranty contact a local and trusted computer repair, (not a type of installation of the repair shop retail chain).

  See you soon.

  Mick Murphy - Microsoft partner

• On startup, I get the message following diskette drive 0 seek failure 1 not found drive Serial ATA, SATA 2 strike F-1 key to continue, F2 to run the utility series

  At the start of the black screen appears and tells Diskeyye drive 0 seek failure 1 drive not found: Serial ATA, SATA2 strike F1 key to continue, F2 to run the Setup utility, how can I keep this lift every time?

  Hi FRANKDURHAM,

  1. are you able to boot into Windows after the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  Microsoft cannot provide specific instructions for changing your CMOS and BIOS settings because they are specific to your computer. For more information about the correct CMOS and BIOS settings for your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• diskette drive 0 seek failure__a disk read error (press Ctrl alt del to restart)

  Hi I want to get help here

  has resolve an error on my 110 computer and I downloaded a fix from microsoft

  then he showed in floppy drive 0 seek failure

  has made computer at the time, but now he used he goes now to screen (disc read error). one of the records shows that it is 0 MB that maybe someone could tell me what to do in the configuration that I can't go to the computer via the system startup

  F2 or del is how normally get in the Bios.

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/t/19125045.aspx

  Read the info at the link above.

  Diskette drive 0 seek failure Floppy drive 1 seek failure	Diskette/tape drive controller cannot locate the specific sector or follow.	Defective or badly inserted diskette, incorrect program installation system configuration settings, the diskette/tape drive interface cable, or bad power cable.
  Diskette read failure	Failure occurred while the system tried to read the disk.	Faulty diskette, cable interface drive diskette/tape faulty or badly connected or bad power cable.

  See you soon.

  Mick Murphy - Microsoft partner

• How to disable the floppy drive 0 seek failure message?

  After a restoration of factory on my computer, I get the message 'diskette drive 0 seek failure; F1 to continue... "Could someone tell me how to get rid of this message so I don't have to press F1 each time.

  I disabled the disk but it doesn't help. My computer is perfectly healthy, not having other problems.

  my computer is a dell inspiron 530 and I am running vista.

  If you disable in try the Device Manager in the BIOS.

• Have a Dell Inspiron 530. At the start he said Distette Drive 0 seek failure. Press f1 to get to boot.__How can it be fixed?

  Am running windows Vista Home Premium

  Hi Bartamus premium,
   
  The error tells you that your "floppy" disk is not seen at the start.
   
  I guess that most of you do not have a floppy drive. Thus, you must restart the system and boot in the BIOS Setup screen. Disable the boot disk and make sure your hard disk is properly perceived. This majority happen usually when the battery on the motherboard is removed or died. Or when a reset has been made in the BIOS configuration screen.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  You can also check out the link below:

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19246860.aspx
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• diskettdriver 0 seek failure

  How can you fixs diskettdriver 0 seek failure

  Hello

  This error is the following:

  'diskette drive 0 seek failure '.

  It's to do with a floppy drive:

  Read this; it applies not only to Dell machines:

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/t/19125045.aspx

  "Hello everyone,

  The error tells you that your "floppy" disk is not seen at the start.

  I guess that most of you do not have a floppy drive. Thus, you must restart the system and boot in the BIOS Setup screen. Disable the boot disk and make sure your hard disk is properly perceived. This majority happen usually when the battery on the motherboard is removed or died. Or when a reset has been made in the BIOS configuration screen. »

  And this post here, too:

  "Just add to what Darrell has notified;  If you do not have a floppy drive in the system, go into the BIOS and make sure that the boot order is set to check your first optical drive (i.e. D:\), disk hard drive (usually C:\) next and finally the floppy drive (A:\).

  So it doesn't matter if you don't have in fact a floppy drive installed, because the system will never be able to check for one after booting from a bootable CD/DVD or hard drive"

  See you soon.

• Why I have this message? Error: the floppy drive seek failure

  Original title: why I have this message?

  floppy drive seek failure. I don't have a floppy drive on my cumputer.

  Hello

  This problem occurs if the following two conditions are met:

  The computer has no floppy drive.
  1. the floppy drive is enabled in the BIOS settings.
  2. for example, this problem may occur if the floppy drive is enabled in the BIOS settings by default.

  To resolve this issue, use the system setup program to disable the floppy drive in the computer BIOS. You can contact the manufacturer of your computer to help make these changes.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to solve the problem up the msg "floppy seek failure" at the start and have to press F1 to continue?

  I get the message: "diskette seek failure" on start-up and must by pressing F1 to continue.

  I took actions

  1. I replaced my dvd/cd drive since was noisy and not reading. (I thought I had a HW problem with the drive because it was a bit noisy etc - maybe not the problem because I always get the message)

  2.i press F2 and changed my BIOS so that my hard drive and CD/DVD are the only elements used in the start menu to the top and deleted the other ports using record to remove from the boot sequence.

  3. using the Device Manager I have disabled the floppy drive A and uninstalled the SW, but whenever I restart Windows it says that it detects new HW and re - install the floppy drive on A.  I don't have a floppy drive on my computer!   I don't think that I had a drive on my control panel before this problem.

  Talked to Dell but my warranty is void

  Help

  rhs_44

  Hi rhs_44,

  ·          What is the model number of the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps suggested by Dell and check if this may help: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&docid=52030&doclang=en&l=en&s=gen&cs

  In addition, you can post your request in the Dell forum for more press the same: http://www.dellcommunity.com/supportforums

• How to fix the floppy diskette seek failure at startup

  I have a Dell E520 desktop running windows 7 which has a "floppy" seek failure when I boot. My computer has 1 internal hard drive, a CD-ROM drive and a floppy drive. The problem started after I restored to the conditions of the factory settings in the BIOS Setup.

  Any ideas?

  Hello

  ·         You use the floppy drive?

  Method 1: Disable the floppy drive

  Disable the floppy drive by going to the configuration of the training (don't know exactly how it's called, because it differs from the models) and selecting the floppy drive. You will then see an option to disable the floppy drive (floppy drive).

  (a) press F2 to enter the BIOS

  (b) of the devices to boot or Boot Device Priority

  (c) or set the floppy drive on disabled

  Method 2: Change the boot order so that the hard drive is listed everything first or otherwise prior to the floppy drive.

  The boot order should be as follows.

  First priority - hard drive

  Second priority - CD ROM drive

  Last priority - floppy drive

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, I suggest you to contact the Dell Support for additional assistance.

  Support Dell: http://support.dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

   

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• Hp650: Sart error in SmartHard drive

  Havinprobleminstartupwherethescreenalwayssays; SmartHarddiskhasdetectedaniminentfailure...

  Is your notebook still under warranty?

  Check the status of your warranty here.

  Save all the important files on your laptop to an external storage device.

  That error means that the disc will fail... soon.

  Once you have done that it's time to run the hard drive Diagnostics.

  Press power and immediately press the F2 key to start the Diagnostics. Choose tests of components , and then choose the hard drive test. The following image was created to help a member of a different thread. This is an example of what you will see.

  

  

  If the hard drive test reports failure, you wil have replace the hard drive with a new one.  Once the new drive is installed, you can use your recovery media (usb or recovery disks set) to perform a recovery of image one factory that will recover the operating system on the new hard drive.